Innovative Practice of Israel's Government Procurement

Innovative Practice of Israel's Government Procurement

  Government procurement is an important pillar of government services. Because of the huge number of government purchases, government procurement management play an important role in promoting public sector efficiency and building citizenship. Well-designed government procurement systems also help to achieve policy such as environmental protection, innovation, start-ups and the development of small and medium-sized enterprises.

  Nowadays, countries in the world, especially OECD countries, have been widely practiced with innovative procurement to stimulate innovation and start-ups, and call Innovation procurement can deliver solutions to challenges of public interest and ICTs can play a major role in this. However, in the OECD countries, in addition to the advanced countries that have been developed, many developing countries have also used government procurement to stimulate national R & D and innovation with remarkable results. Israel is one of the world's leading technology innovation centers, one of the most innovative economies in the world, continues to leverage its own strengths, support of technology entrepreneurship and unique environment, an international reputation in the high-tech industry, the spirit of technological innovation and novelty.

  Government procurement is a core element of the activities of Israeli government, agreement with suppliers and compliance with the Mandatory Tenders Law. The main challenge is how to ensure efficiency and maintain government performance while ensuring an equitable and transparent procurement process. Israel’s Mandatory Tenders Law has shown the central role played by the Israeli Supreme Court in creating and developing this law, even in the absence of any procurement legislation, based instead on general principles of administrative law. Once the project of creating a detailed body of public tendering law had been completed, and the legislator was about to step in, the Supreme Court was prepared to step out and transferring the jurisdiction to lower courts. The Knesset passed the Mandatory Tenders Law, and based on it the Government issued the various tendering regulations. Besides, Israel's various international agreements on government procurement, mainly GPA and other bilateral international agreements such as free trade agreements with Mexico and Colombia and free trade agreements and memoranda of understanding with the United States. The practical significance of these commitments can only be understood on the backdrop of Israel’s domestic preference and offset policies. These policies were therefore discussed and analyzed as they apply when none of the international agreements applies.

  The Challenge Tenders "How to solve the problem of overcrowding in the emergency department and the internal medicine department?" is the first of a series of "problem solicitations" released by the Israeli Ministry of Health which seeks to find a digital solution to the public health system problem, questions from the government while avoiding preconceived prejudices affect the nature of the solution, allowing multiple innovative ideas from different fields to enter the health system, make fair and transparent judgments about the ideal solution to the problem. In order to ensure transparency and integrity, equality, efficiency and competition in the decision-making process, the tender proposed by the Israeli Ministry of Health defines a two-stage tender process. The Ministry of Health of Israel, in order to improve the quality of medical care, shorten the waiting time for hospitalized patients, protect the dignity of patients and their families with patients as its center, and ensure their rights, while alleviating the burden of hospital staff, so as to pass the targeted treatment areas reduce the gap between various residential areas. The Israeli government deals with these issues through challenging tenders and offers a digital solution combined with innovative ideas. The initiative proposed through the development of public service projects can raise the level of public services in the country and help the government to reduce costs and achieve the purpose of promoting innovation with limited conceptual, technical and financial capabilities. In addition, due to the online operation of the challenging tender process throughout the entire process, fair and transparent procedures can be ensured, while public-private partnerships are encouraged to facilitate the implementation of the implementation plan.

※Innovative Practice of Israel's Government Procurement,STLI, https://stli.iii.org.tw/en/article-detail.aspx?no=86&tp=2&i=168&d=7937 (Date:2024/04/20)
Quote this paper
You may be interested
Observing Recent Foreign Developments upon Bio-medicine、 Marketing Medical Devices、Technology Development Project and the Newest Litigation Trend Concerning the Joint Infringement of Method/Process Patents

1、Chinese REACH has put into shape, how about Taiwan REACH? - A Perspective of Chinese Measures on Environmental Management of New Chemical Substances Taiwan food industry has been struck by the government agency's disclosure that certain unfaithful manufacturers have mixed toxic chemicals into the food additives for the past 30 years, and the chemicals may seriously threaten public health. This event has not only shocked the confidence of the customers to the industry, but also drew public attention on the well-management and the safe use of chemicals. In order to manage the fast advancing and widely applicable chemical substance appropriately, the laws and regulations among the international jurisprudences in recent years tend to regulate unfamiliar chemicals as “new chemical substances” and leverage registration systems to follow their use and import. REACH is one the most successful models which has been implemented by European Union since 2006. China, one of our most important business partners, has also learned from the EU experience and implemented its amended " Measures on Environmental Management of New Chemical Substances" (also known as "Chinese REACH") last year. It is not only a necessity for our industry which has invested or is running a business in China to realize how this new regulation may influence their business as differently , but also for our authority concerned to observe how can our domestic law and regulation may connect to this international trend. Therefore, except for briefing the content of Chinese REACH, this article may also review those existing law and regulations in Taiwan and observe the law making movement taken by our authority. We expect that the comparison and observation in this article may be a reference for our authorities concerned to map out a better environment for new chemical management. 2、The study on Taiwanese businessmen Join the Bid Invitation and Bidding of Science and Technology Project China government invests great funds in their Science and Technology Project management system, containing most of innovated technology. It also creates the great business opportunity for domestic industry. China government builds up a Bid Invitation and Bidding Procedure in the original Science and Technology Project Regime recent years, in order to make the regime become more open and full of transparency. It also improves Regime to become more fairness and efficiency. Taiwan industry may try to apply for those Science and Technology Project, due to this attractive opportunity, but they should understand china's legal system before they really do that. This Article will introduce the "Bid Invitation and Bidding Law of the Peoples Republic of China", and the "Provisional Regulation on Bid Invitation and Bidding of Science and Technology Project", then clarify applied relationship between the "Bid Invitation and Bidding Law of the Peoples Republic of China", and "Government Procurement Law of the Peoples Republic of China". It also analyzes "Bid Invitation and Bidding Procedure", "Administration of Contract Performance Procedure", "Inspection and Acceptance Procedure", and "Protest and Complaint Procedure, providing complete legal observation and opinion for Taiwan industry finally. Keyword Bid Invitation and Bidding Law of the Peoples Republic of China; Government Procurement Law of the Peoples Republic of China; Provisional Regulation on Bid Invitation and Bidding of Science and Technology Project; Applying for Science and Technology Project Regime; Bid Invitation and Bidding Procedure; Administration of Contract Performance Procedure; Inspection and Acceptance Procedure; Protest and Complaint Procedure. 3、Comparing the Decisions of the United States Supreme Court regarding Preempting Marketing Medical Devices and Drugs from State Tort Litigations with the Decision of a Hypothetical Case in Taiwan The investment costs of complying with pertinent laws and regulations for manufacturing, marketing, and profiting from drugs and medical devices (abbreviated as MD) are far higher than the costs necessary for securing a market permit. The usage of MD products contains the risk of harming their users or the patients, who might sue the manufacturer for damages in the court based on tort law. To help reduce the risk of such litigation, the industry should be aware of the laws governing the state tort litigations and the preemption doctrine of the federal laws of the United States. This article collected four critical decisions by the United States Supreme Court to analyze the requirements of federal preemption from the state tort litigations in these cases. The article also analyzed the issues of preemption in our law system in a hypothetical case. These issues include the competing regulatory requirements of the laws and regulations on the drugs and MDs and the Drug Injury Relief Act versus the Civil Code and the Consumer Protection Law. The article concluded: 1. The pre-market-approval of MD in the United States is exempted from the state tort litigations; 2. Brand-name-drug manufacturers must proactively update the drug label regarding severe risks evidenced by the latest findings; 3. Generic-drug manufacturers are exempted from the product liability litigations and not required to comply with the aforementioned brand-name-drug manufacturers' obligation; 4. No preemption issues are involved in these kinds of product liability litigations in our country; 5. The judge of general court is not bound by the approval of marketing of drug and MD; 6. The judge of general court is not bound by the determination and verdict of the Drug Injury Relief Act. 4、Through Computer-Aided Detection Software, Comparing by Discussing and Analyzing the Regulatory Requirements for Marketing Medical Devices in the United States and in Taiwan Computer-Aided Detection (CADe) software systematically assists medical doctors to detect suspicious diseased site(s) inside patients' bodies, and it would help patients receive proper medical treatments as soon as possible. Only few of this type of medical device (MD) have been legally marketed either in the United States of America (USA) or in Taiwan. This is a novel MD, and the rules regulating it are still under development. Thus, it is valuable to investigate and discuss its regulations. To clarify the requirements of legally marketing the MD, this article not only collects and summarizes the latest draft guidance announced by the USA, but also compares and analyzes the similarities and differences between USA and Taiwan, and further explains the logics that USA applies to clarify and qualify CADe for marketing, so that the Department of Health (DOH) in Taiwan could use them as references. Meanwhile, the article collects the related requirements by the Administrative Procedure Act and by the Freedom of Government Information Law of our nation, and makes the following suggestions on MD regulations to the DOH: creating product code in the system of categorization, providing clearer definition of classification, and actively announcing the (abbreviated) marketing route that secures legal permission for each individual product. 5、A Discussion on the Recent Cases Concerning the Joint Infringement of Method/Process Patents in the U.S. and Japan In the era of internet and mobile communication, practices of a method patent concerning innovative service might often involve several entities, and sometimes the method patent can only be infringed jointly. Joint infringement of method/process patents is an issue needed to be addressed by patent law, since it is assumed that a method patent can only be directly infringed by one entity to perform all the steps disclosed in the patent. In the U.S., CAFC has established the "control or direction" standard to address the issue, but the standard has been criticized and it is under revision now. In Japan, there is no clearly-established standard to address the issue of joint infringement, but it seems that the entity that controls and benefits from the joint infringement might be held liable. Based on its discussion about the recent development in the U.S. and Japan, this article attempts to provide some suggestions for inventors of innovative service models to use patents to protect their inventions properly: they should try to avoid describing their inventions in the way of being practiced by multi-entities, they should try to claim both method and system/apparatus inventions, and they should try to predict the potential infringement of their patents in order to address the problem of how to prove the infringement.

Impact of Government Organizational Reform to Research Legal System and Response Thereto (2) – Observation of the Swiss Research Innovation System

Impact of Government Organizational Reform to Research Legal System and Response Thereto (2) – Observation of the Swiss Research Innovation System I. Foreword   Switzerland is a landlocked country situated in Central Europe, spanning an area of 41,000 km2, where the Alps occupy 60% of the territory, while it owns little cultivated land and poor natural resources. In 2011, its population was about 7,950,000 persons[1]. Since the Swiss Federal was founded, it has been adhering to a diplomatic policy claiming neutrality and peace, and therefore, it is one of the safest and most stable countries in the world. Switzerland is famous for its high-quality education and high-level technological development and is very competitive in biomedicine, chemical engineering, electronics and metal industries in the international market. As a small country with poor resources, the Swiss have learnt to drive their economic and social development through education, R&D and innovation a very long time ago. Some renowned enterprises, including Nestle, Novartis and Roche, are all based in Switzerland. Meanwhile, a lot of creative small-sized and medium-sized enterprises based in Switzerland are dedicated to supporting the export-orientation economy in Switzerland.   Switzerland has the strongest economic strength and plentiful innovation energy. Its patent applications, publication of essay, frequencies of quotation and private enterprises’ innovation performance are remarkable all over the world. According to the Global Competitiveness Report released by the World Economic Forum (WEF), Switzerland has ranked first among the most competitive countries in the world for four years consecutively since 2009[2]. Meanwhile, according to the Global Innovation Index (GII) released by INSEAD and the World Intellectual Property Organization (WIPO) jointly, Switzerland has also ranked first in 2011 and 2012 consecutively[3]. Obviously, Switzerland has led the other countries in the world in innovation development and economic strength. Therefore, when studying the R&D incentives and boosting the industrial innovation, we might benefit from the experience of Switzerland to help boost the relevant mechanism in Taiwan.   Taiwan’s government organization reform has been launched officially and boosted step by step since 2012. In the future, the National Science Council will be reformed into the “Ministry of Science and Technology”, and the Ministry of Economic Affairs into the “Ministry of Economy and Energy”, and the Department of Industrial Development into the “Department of Industry and Technology”. Therefore, Taiwan’s technology administrative system will be changed materially. Under the new government organizational framework, how Taiwan’s technology R&D and industrial innovation system divide work and coordinate operations to boost the continuous economic growth in Taiwan will be the first priority without doubt. Support of innovation policies is critical to promotion of continuous economic growth. The Swiss Government supports technological research and innovation via various organizations and institutions effectively. In recent years, it has achieved outstanding performance in economy, education and innovation. Therefore, we herein study the functions and orientation of the competent authorities dedicated to boosting research and innovation in Switzerland, and observe its policies and legal system applied to boost the national R&D in order to provide the reference for the functions and orientation of the competent authorities dedicated to boosting R&D and industrial innovation in Taiwan. II. Overview of Swiss Federal Technology Laws and Technology Administrative System   Swiss national administrative organization is subject to the council system. The Swiss Federal Council is the national supreme administrative authority, consisting of 7 members elected from the Federal Assembly and dedicated to governing a Federal Government department respectively. Switzerland is a federal country consisting of various cantons that have their own constitutions, councils and governments, respectively, entitled to a high degree of independence.   Article 64 of the Swiss Federal Constitution[4] requires that the federal government support research and innovation. The “Research and Innovation Promotion Act” (RIPA)[5] is dedicated to fulfilling the requirements provided in Article 64 of the Constitution. Article 1 of the RIPA[6] expressly states that the Act is enacted for the following three purposes: 1. Promoting the scientific research and science-based innovation and supporting evaluation, promotion and utilization of research results; 2. Overseeing the cooperation between research institutions, and intervening when necessary; 3. Ensuring that the government funding in research and innovation is utilized effectively. Article 4 of the RIPA provides that the Act shall apply to the research institutions dedicated to innovation R&D and higher education institutions which accept the government funding, and may serve to be the merit for establishment of various institutions dedicated to boosting scientific research, e.g., the National Science Foundation and Commission of Technology & Innovation (CTI). Meanwhile, the Act also provides detailed requirements about the method, mode and restriction of the government funding.   According to the RIPA amended in 2011, the Swiss Federal Government’s responsibility for promoting innovation policies has been extended from “promotion of technology R&D” to “unification of education, research and innovation management”, making the Swiss national industrial innovation framework more well-founded and consistent[8] . Therefore, upon the government organization reform of Switzerland in 2013, most of the competent authorities dedicated to technology in Swiss have been consolidated into the Federal Department of Economic Affairs, Education and Research.   Under the framework, the Swiss Federal Government assigned higher education, job training, basic scientific research and innovation to the State Secretariat for Education, Research and Innovation (SERI), while the Commission of Technology & Innovation (CTI) was responsible for boosting the R&D of application scientific technology and industrial technology and cooperation between the industries and academy. The two authorities are directly subordinate to the Federal Department of Economic Affairs, Education and Research (EAER). The Swiss Science and Technology Council (SSTC), subordinate to the SERI is an advisory entity dedicated to Swiss technology policies and responsible for providing the Swiss Federal Government and canton governments with the advice and suggestion on scientific, education and technology innovation policies. The Swiss National Science Foundation (SNSF) is an entity dedicated to boosting the basic scientific R&D, known as the two major funding entities together with CTI for Swiss technology R&D. The organizations, duties, functions and operations of certain important entities in the Swiss innovation system are introduced as following. Date source: Swiss Federal Department of Economic Affairs, Education and Research official website Fig. 1 Swiss Innovation Framework Dedicated to Boosting Industries-Swiss Federal Economic, Education and Research Organizational Chart 1. State Secretariat of Education, Research and Innovation (SERI)   SERI is subordinate to the Department of Economic Affairs, Education and Research, and is a department of the Swiss Federal Government dedicated to managing research and innovation. Upon enforcement of the new governmental organization act as of January 1, 2013, SERI was established after the merger of the State Secretariat for Education and Research, initially subordinate to Ministry of Interior, and the Federal Office for Professional Education and Technology (OEPT), initially subordinated to Ministry of Economic Affairs. For the time being, it governs the education, research and innovation (ERI). The transformation not only integrated the management of Swiss innovation system but also unified the orientations toward which the research and innovation policy should be boosted.   SERI’s core missions include “enactment of national technology policies”, “coordination of research activities conducted by higher education institutions, ETH, and other entities of the Federal Government in charge of various areas as energy, environment, traffic and health, and integration of research activities conducted by various government entities and allocation of education, research and innovation resources. Its functions also extend to funding the Swiss National Science Foundation (SNSF) to enable SNSF to subsidize the basic scientific research. Meanwhile, the international cooperation projects for promotion of or participation in research & innovation activities are also handled by SERI to ensure that Switzerland maintains its innovation strength in Europe and the world.   The Swiss Science and Technology Council (SSTC) is subordinate to SERI, and also the advisory unit dedicated to Swiss technology policies, according to Article 5a of RIPA[9]. The SSTC is responsible for providing the Swiss Federal Government and canton governments with advice and suggestion about science, education and innovation policies. It consists of the members elected from the Swiss Federal Council, and a chairman is elected among the members. 2. Swiss National Science Foundation (SNSF)   The Swiss National Science Foundation (SNSF) is one of the most important institutions dedicated to funding research, responsible for promoting the academic research related to basic science. It supports about 8,500 scientists each year. Its core missions cover funding as incentives for basic scientific research. It grants more than CHF70 million each year. Nevertheless, the application science R&D, in principle, does not fall in the scope of funding by the SNSF. The Foundation allocates the public research fund under the competitive funding system and thereby maintains its irreplaceable identity, contributing to continuous output of high quality in Switzerland.   With the support from the Swiss Federal Government, the SNSF was established in 1952. In order to ensure independence of research, it was planned as a private institution when it was established[10]. Though the funding is provided by SERI, the SNSF still has a high degree of independence when performing its functions. The R&D funding granted by the SNSF may be categorized into the funding to free basic research, specific theme-oriented research, and international cooperative technology R&D, and the free basic research is granted the largest funding. The SNSF consists of Foundation Council, National Research Council and Research Commission[11]. Data source: prepared by the Study Fig. 2  Swiss National Science Foundation Organizational Chart (1) Foundation Council   The Foundation Council is the supreme body of the SNSF[12], which is primarily responsible for making important decisions, deciding the role to be played by the SNSF in the Swiss research system, and ensuring SNSF’s compliance with the purpose for which it was founded. The Foundation Council consists of the members elected from the representatives from important research institutions, universities and industries in Swiss, as well as the government representatives nominated by the Swiss Federal Council. According to the articles of association of the SNSF[13], each member’s term of office should be 4 years, and the members shall be no more than 50 persons. The Foundation Council also governs the Executive Committee of the Foundation Council consisting of 15 Foundation members. The Committee carries out the mission including selection of National Research Council members and review of the Foundation budget. (2) National Research Council   The National Research Council is responsible for reviewing the applications for funding and deciding whether the funding should be granted. It consists of no more than 100 members, mostly researchers in universities and categorized, in four groups by major[14], namely, 1. Humanities and Social Sciences; 2. Math, Natural Science and Engineering; 3. Biology and Medical Science; and 4. National Research Programs (NRPs)and National Centers of Competence in Research (NCCRs). The NRPs and NCCRs are both limited to specific theme-oriented research plans. The funding will continue for 4~5years, amounting to CHF5 million~CHF20 million[15]. The specific theme-oriented research is applicable to non-academic entities, aiming at knowledge and technology transfer, and promotion and application of research results. The four groups evaluate and review the applications and authorize the funding amount.   Meanwhile, the representative members from each group form the Presiding Board dedicated to supervising and coordinating the operations of the National Research Council, and advising the Foundation Council about scientific policies, reviewing defined funding policies, funding model and funding plan, and allocating funding by major. (3) Research Commissions   Research Commissions are established in various higher education research institutions. They serve as the contact bridge between higher education academic institutions and the SNSF. The research commission of a university is responsible for evaluating the application submitted by any researcher in the university in terms of the school conditions, e.g., the school’s basic research facilities and human resource policies, and providing advice in the process of application. Meanwhile, in order to encourage young scholars to attend research activities, the research committee may grant scholarships to PhD students and post-doctor research[16]. ~to be continued~ [1] SWISS FEDERAL STATISTICS OFFICE, Switzerland's population 2011 (2012), http://www.bfs.admin.ch/bfs/portal/en/index/news/publikationen.Document.163772.pdf (last visited Jun. 1, 2013). [2] WORLD ECONOMIC FORUM [WEF], The Global Competiveness Report 2012-2013 (2012), http://www3.weforum.org/docs/WEF_GlobalCompetitivenessReport_2012-13.pdf (last visited Jun. 1, 2013); WEF, The Global Competiveness Report 2011-2012 (2011), http://www3.weforum.org/docs/WEF_GCR_Report_2011-12.pdf (last visited Jun. 1, 2013); WEF, The Global Competiveness Report 2010-2011 (2010), http://www3.weforum.org/docs/WEF_GlobalCompetitivenessReport_2010-11.pdf (last visited Jun. 1, 2013); WEF, The Global Competiveness Report 2009-2010 (2009),. http://www3.weforum.org/docs/WEF_GlobalCompetitivenessReport_2009-10.pdf (last visited Jun. 1, 2013). [3] INSEAD, The Global Innovation Index 2012 Report (2012), http://www.globalinnovationindex.org/gii/GII%202012%20Report.pdf (last visited Jun. 1, 2013); INSEAD, The Global Innovation Index 2011 Report (2011), http://www.wipo.int/freepublications/en/economics/gii/gii_2011.pdf (last visited Jun. 1, 2013). [4] SR 101 Art. 64: “Der Bund fördert die wissenschaftliche Forschung und die Innovation.” [5] Forschungs- und Innovationsförderungsgesetz, vom 7. Oktober 1983 (Stand am 1. Januar 2013). For the full text, please see www.admin.ch/ch/d/sr/4/420.1.de.pdf (last visited Jun. 3, 2013). [6] Id. [7] Id. [8] CTI, CTI Multi-year Program 2013-2016 7(2012), available at http://www.kti.admin.ch/?lang=en&download=NHzLpZeg7t,lnp6I0NTU042l2Z6ln1ad1IZn4Z2qZpnO2Yuq2Z6gpJCDeYR,hGym162epYbg2c_JjKbNoKSn6A-- (last visited Jun. 3, 2013). [9] Supra note 5. [10] Swiss National Science Foundation, http://www.snf.ch/E/about-us/organisation/Pages/default.aspx (last visited Jun. 3, 2013). [11] Id. [12] Foundation Council, Swiss National Science Foundation, http://www.snf.ch/E/about-us/organisation/Pages/foundationcouncil.aspx (last visited Jun. 3, 2013). [13] See Statutes of Swiss National Science Foundation Art.8 & Art. 9, available at http://www.snf.ch/SiteCollectionDocuments/statuten_08_e.pdf (last visited Jun. 3, 2013). [14] National Research Council, Swiss National Science Foundation, http://www.snf.ch/E/about-us/organisation/researchcouncil/Pages/default.aspx (last visted Jun.3, 2013). [15] Theres Paulsen, VISION RD4SD Country Case Study Switzerland (2011), http://www.visionrd4sd.eu/documents/doc_download/109-case-study-switzerland (last visited Jun.6, 2013). [16] Research Commissions, Swiss National Science Foundation, http://www.snf.ch/E/about-us/organisation/Pages/researchcommissions.aspx (last visted Jun. 6, 2013).

Adopting Flexible Mechanism to Promote Public Procurement of Innovation—the Amendment of Article 27 of the Statute for Industrial Innovation

Adopting Flexible Mechanism to Promote Public Procurement of Innovation—the Amendment of Article 27 of the Statute for Industrial Innovation I.Introduction   To further industrial innovation, improve industrial environment, and enhance industrial competitiveness through a systematic long-term approach, the Statute for Industrial Innovation (hereinafter referred to as the Statute) has been formulated in Taiwan. The central government authority of this Statute is the Ministry of Economic Affairs, and the Industrial Development Bureau of the Ministry of Economic Affairs (henceforth referred to as the IDB) is the administrative body for the formulation of this Statute. Since its formulation and promulgation in 2010, the Statute has undergone four amendments. The latest amendment, passed by the Legislative Yuan on November 3, 2017, on the third reading, is a precipitate of the international industrial development trends. The government is actively encouraging the investment in industrial innovation through a combination of capital, R&D, advanced technologies and human resources to help the promotion of industrial transformation, hence this large scale amendment is conducted. The amendment, promulgated and enacted on November 22, 2017, focuses on eight key points, which include: state-owned businesses partaking in R&D (Article 9-1 of the amended provisions of the Statute), the tax concessions of the limited partnership venture capital businesses (Article 2, Article 10, Article 12-1 and Article 23-1 of the amended provisions of the Statute), the tax concessions of Angel Investors (Article 23-2 of the amended provisions of the Statute), applicable tax deferral of employees' stock compensation (Article 19-1 of the amended provisions of the Statute), tax deferral benefit of stocks given to research institution creators (Article 12-2 of the amended provisions of the Statute), the promotion of flexible mechanism for innovation procurement (Article 27 of the amended provisions of the Statute), the establishment of evaluation mechanism for intangible assets (Article 13 of the amended provisions of the Statute), and forced sale auction of idled land for industrial use (Article 46-1 of the amended provisions of the Statute). This paper focuses on the amendment of Article 27 of the Fourth Revision of the Statute, which is also one of the major focuses of this revision—promoting flexible mechanism for innovation procurement, using the mass-market purchasing power of the government as the energetic force for the development of industrial innovation. II.Explanation of the Amendment of Article 27 of the Statute 1.Purposes and Descriptions of the Amendment of Article 27 of the Statute   The original intent of Article 27 (hereinafter referred to as the Article) of the Statute, prior to the latest amendment (content of the original provisions is shown in Table 1), was to encourage government agencies and enterprises to give a priority to using green products through the "priority procurement" provisions of Paragraph 2, which allow government agencies to award contracts to green product producers using special government procurement procedures, so as to increase the opportunities for government agencies to use green products, and thereby promote the sustainable development of the industry. In view of the inherent tasks of promoting the development of industrial innovation, and considering that, using the large-scale government procurement demand to guide industrial innovation activities, has become the policy instrument accepted by most advanced countries, the IDB expects that, with the latest amendment of Article 27, the procurement mechanism policy for software, innovative products and services, in addition to the original green products, may become influential, and that "innovative products and services" may be included in the scope of "Priority Procurement" of this Article namely, make “priority procurement of innovative products and services” as one of the flexible mechanisms for promoting innovation procurement. A comparison of the amended provisions and the original provisions is shown in Table 1, and an explanation of the amendment is described as follows:[1] Table 1 A Comparison of Article 27 Amendment of the Statute for Industrial Innovation Amended Provisions Original Provisions Article 27   (I) Each central government authority in charge of end enterprises of a specific industry shall encourage government organizations (agencies) and enterprises to procure software, innovative and green products or services.   (II) To enhance the procurement efficiencies, as effected by supply and demand, the central government authority shall offer assistance and services to the organizations (agencies) that handle these procurements as described in the preceding paragraph; wherein, Inter-entity Supply Contracts that are required for the aforesaid procurements, the common requirements shall be decided, in accordance with policy requirements, upon consultation between the central government authority and each central government authority in charge of end enterprises of a specific industry.   (III) Where the software, innovative and green products or services, as described in Paragraph 1, must be tested, audited, accredited and certified, their associated fees and charges may be reduced, exempted, or suspended.   (IV) Government organizations (agencies) may specify in the tender document the priority procurement of innovative and green products or services that have been identified to meet the requirements of paragraph 1. However, such a specification shall not violate treaties or agreements that have been ratified by the Republic of China.   The measures concerning specifications, categories, and identification procedures of software, innovative and green products or services as prescribed in Paragraph 1; the testing, auditing criteria, accreditation and certification as prescribed in paragraph 3; and the Priority Procurement in paragraph 4 and other relevant items, shall be established by each central government authority in charge of end-enterprises of a specific industry. Article 27   (I) Each central government authority in charge of end enterprises shall encourage government agencies and enterprises to give priority to green products that are energy/resources recyclable/renewable, energy and water saving, non-toxic, less-polluting, or able to reduce the burden on the environment.   (II) Agencies may specify in the tender documents that priority is given to green products meeting the requirement set forth in the preceding Paragraph.   (III) The regulations governing the specifications, categories, certification procedures, review standards, and other relevant matters relating to the green products as referred to in the preceding Paragraph shall be prescribed by the central government authorities in charge of end enterprises. Source: The Ministry of Economic Affairs (I).Paragraph 1   In order to compel each central government authority in charge of end enterprises of a specific industry to motivate industrial innovation activities and sustainable development on the basis of requirements, and to support the development of the software industry in Taiwan, the provision, that such an authority should encourage government organizations (agencies) and enterprises to procure software and innovative products and services, is added in paragraph 1. (II).Paragraph 2   This procurement, as described in paragraph 1, is different from the property or services procurement of general affairs as handled by various organizations. To enhance procurement efficiencies, as effected by supply and demand, the central government authority, i.e., the Ministry of Economic Affairs, shall provide relevant assistance and services to organizations (agencies) handling these procurements, hence the added provisions in paragraph 2. For purchases using inter-entity supply contracts, which are bound by the requirements of this Article, due to their prospective nature, and that the common demand of each organization is difficult to make an accurate estimate by using a demand survey or other method, the Ministry of Economic Affairs shall discuss the issues with each central government authority in charge of end-enterprises of a specific industry, who consult or promote policies, and are in charge of end enterprises of a specific industry, and then make decisions in accordance with the policy promotion requirements. (III).Paragraph 3   The fee schedule for testing, auditing, accrediting and certifying software, innovative and green products or services is covered by Article 7, Administrative Fees of the Charges And Fees Act. The authorities in charge should determine relevant fee standards.However, considering that the test, audit, accreditation and certification may be conducted during a trial or promotional period, or circumstances dictate that it is necessary to motivate tenderer participation, the fee may be reduced, waived or suspended; hence, paragraph 3 is added. (IV).Paragraph 4   Paragraph 2 of the original provision is moved to paragraph 4 with the revisions made to paragraph 1, accordingly, and the provision for using Priority Procurement to handle innovative products or services is added. However, for organizations covered by The Agreement on Government Procurement (GPA), due to Taiwan's accession to the WTO, ANZTEC, and ASTEP, their procurement of items covered in the aforesaid agreements with a value reaching the legislated threshold, shall be handled in accordance with the regulations stipulated in the aforesaid agreements; hence the stipulation in the proviso that the procurement must not violate the provisions of treaties or agreements ratified by the Taiwan government. (V).Paragraph 5   Paragraph 3 of the original Article is moved to paragraph 5 with the revisions made to paragraph 1, accordingly, and the provision, that authorizes each central government authority in charge of end enterprises of a specific industry to determine appropriate measures concerning the methods of defining software, innovative and green products and services, as well as matters relating to test, accreditation, certification and priority procurement, is added. 2.The Focus of the Amendment of Article 27 of the Statute—Promoting a Flexible Mechanism for Innovation Procurement   As previously stated, the amendment of this Article aims to stimulate activities of industrial innovation by taking advantage of the huge demand from government agencies. With the government agencies being the users of the innovative products or services, government's procurement market potential is tapped to support the development of industrial innovation. The original intention of amendment is to incorporate the spirit of Public Procurement of Innovation[2] into this Article, and to try to introduce EU's innovation procurement mechanism[3] into our laws. So that, a procurement procedure, that is more flexible and not subject to the limitation of procurement procedures currently stipulated by the Government Procurement Act, may be adopted to facilitate government sector action in taking the lead on adopting innovative products or services that have just entered their commercial prototype stage, or utilizing the demand for innovation in the government sector to drive industry's innovative ideas or R&D (that can not be satisfied with the existing solutions in the marketplace). However, while it is assessing the relevant laws and regulations of our government procurement system and the practice of implementation, the use of the current government procurement mechanism by organizations in the public sector to achieve the targets of innovation procurement is still in its infancy. It is difficult to achieve the goal, in a short time, of establishing a variety of Public Procurement of Innovation Solutions (PPI Solutions) as disclosed in the EU's Directive 2014/24 / EU, enacted by the EU in 2014, in ways that are not subject to current government procurement legislation. Hence, the next best thing: Instead of setting up an innovative procurement mechanism in such a way that it is "not subject to the restrictions of the current government procurement law", we will focus on utilizing the flexible room available under the current system of government procurement laws and regulations, and promoting the "flexible mechanism for innovation procurement” paradigm. With the provisions now provided in Article 27 of the Statute for Industrial Innovation, the government sector is authorized to adopt the "Priority Procurement" method on innovative products and services, thus increasing the public sector's access to innovative products and services.   With this amendment, in addition to the "green products" listed in the original provisions of paragraph 1 of the Statute, "software" and "innovative products or services"[4] are now incorporated into the target procurement scope and each central government authority in charge of end enterprises of a specific industry should now encourage government organizations and enterprises to implement; however, the provisions of this paragraph do not have the specific effect of law, they are declaratory provisions. Two priorities are the1 primary focus of the provisions of paragraph 2 and paragraph 4 of this Article for promoting flexible mechanism for innovation procurement: (I)The procurement of software, innovative and green products or services that uses Inter-entity Supply Contracts may rely on the "policy requirement" to establish the common demand.   According to the first half of the provisions of paragraph 2 of this Article, the Ministry of Economic Affairs, being the central government authority of the Statute, may provide assistance and services to organizations dealing with the procurement of software, innovative and green products and services.This is because the procurement subjects, as pertaining to software, products or services that are innovative and green products (or services), usually have the particularities (especially in the software) of the information professions; different qualities (especially in innovative products or services), and are highly profession-specific. They are different from the general affairs goods and services procured by most government agencies. Hence, the Ministry of Economic Affairs may provide assistance and service to these procurement agencies, along with the coordination of relevant organizations, in matters relating to the aforesaid procurement process in order to improve procurement efficiency as relates to supply and demand.   Pursuant to the second half of Paragraph 2 of this Article, if the inter-entity supply contract method is used to process the procurement of software, innovative products and services, green products (or services) and other related subjects, there could be "Commonly Required" by two or more organizations concerning the procurement subjects, so in accordance with the stipulations of Article 93 of the Government Procurement Act, and Article 2 of the Regulations for The Implementation of Inter-entity Supply Contracts[5], an investigation of common requirements should be conducted first. However, this type of subject is prospective and profession-specific (innovative products or services in particular), and government organizations are generally not sure whether they have demand or not, which makes it difficult to reliably estimate the demand via the traditional demand survey method[6], resulting in a major obstacle for the procurement process. Therefore, the provisions are now revised to allow the Ministry of Economic Affairs to discuss procurement with each central government authority in charge of end enterprises of a specific industry, who consult or promote policies (such as the National Development Council, or central government authority in charge of end enterprises of a specific industry relevant to the procurement subjects), and then make decisions based on the quantities of goods and services of common requirements in accordance with the demand for promoting the policy. The provisions explicitly stipulate such flexibility in adopting methods other than the "traditional demand survey" method, as is required by laws for the common demand of Inter-entity Supply Contracts. Thus, agencies currently handling procurement of prospective or innovative subjects using inter-entity supply contracts, may reduce the administrative burden typically associated with conducting their own procurement. In addition, with a larger purchase quantity demand, as generated from two or more organizations, the process can more effectively inject momentum into the industry, and achieve a win-win situation for both supply and demand. (II)Government organizations may adopt "Priority Procurement" when handling procurement of innovative and green products or services.   Prior to the amendment, the original provision of paragraph 2 of this Article stipulates that organizations may specify in the tender document Priority Procurement of certified green products; Additionally, a provision of paragraph 3 of the original Article stipulates that each central government authority in charge of end enterprises of a specific industry is authorized to establish the specifications, categories and other relevant matters of the green products[7] (according to the interpretation of the original text, it should include "Priority Procurement" in paragraph 3 of the Article).After the amendment of the Article, paragraph 2 of the original Article is moved to paragraph 4. In addition to the original green products, "innovative products or services" are included in the scope of "Priority Procurement" that organizations are permitted to adopt (but, the "software" in paragraph 1 was not included[8]). However, for organizations covered by The Agreement on Government Procurement (GPA), due to Taiwan's accession to the WTO, ANZTEC, and ASTEP, their procurement of items covered by the aforesaid agreements with a value reaching the stated threshold, shall be handled in accordance with the regulations stipulated in the aforesaid agreements; hence the stipulation in the proviso that the procurement must not violate the provisions in treaties or agreements ratified by the Taiwan government. Additionally, paragraph 3 of the original Article is moved to paragraph 5. Each central government authority in charge of end enterprises of a specific industry is authorized to use their own judgment on matters concerning the specifications, categories, certification processes of software, innovative and green products or services and the method for Priority Procurement of paragraph 4.   In accordance with the authorization in paragraph 5 of the amended provision of this Article, each central government authority in charge of end enterprises of a specific industry may, depending on the specific policy requirement that promotes innovation development of its supervised industry, establish methods of identification and the processes of Priority Procurement for “Specific categories of innovative products or services", especially on products or services fitting the requirements of the method of using the demands of government organizations to stimulate industrial innovation. The established "Regolations for priority procurement of Specific categories of innovative products or services" is essentially a special regulation of the government procurement legislation, which belongs to the level of regulations, that is, it allows the organizations to apply measures other than the government procurement regulations and its related measures to the procurement process, and adopt "Preferential Contract Awarding" for qualified innovative products or services. Any government agency that has the need to procure a particular category of innovative product or service may, in accordance with the provisions of paragraph 4 of this Article, specify the use of Priority Procurement in the tender document, and administer the procurement, in accordance with the process of this particular category of innovative products, or priority procurement. The agency is now enabled to follow a more flexible procurement process than that of the government procurement regulations to more smoothly award contracts for qualified innovative products or services.   Citing two examples of this applied scenario: Example one, "innovative information services": The central government authority in charge of information services is IDB. Thus, IDB may, according to the authorization provided for in paragraph 5 of the Article, establish the identification methods for innovative information services (the purpose of which is to define the categories and specifications of innovative services covered in the scope of priority procurement) and priority procurement processes, pertaining to emerging information services that are more applicable to the requirements of government agencies, such as: cloud computing services, IoT services, and Big Data analysis services.Example two, "Innovative construction or engineering methods": The central government authority in charge of construction affairs is the Construction and Planning Agency of the Ministry of the Interior. Since the agency has already established the "Guidelines for Approval of Applications for New Construction Techniques, Methods, Equipment and Materials", the agency may establish a priority procurement process for new construction techniques, methods or equipment, in accordance with the stipulations in paragraph 5 of the Article. Government agencies may conduct procurement following any of these priority procurement practices, if there is a requirement for innovative information services, or new construction techniques, methods or equipment.   In addition to the two aforementioned flexible mechanisms for innovation procurement, where government agencies are granted flexible procedures to handle the procurement of innovative products or services via the use of the flexible procurement mechanism, paragraph 3, concerning the incentive measures of concessionary deductions, is added to the Article to reduce the bidding costs for tenderers participating in the tender. For the Procurement of software, innovative and green products or services encouraged by each central government authority in charge of end-enterprises of a specific industry (not limited to those handled by the authorities themselves, using inter-entity supply contracts or priority procurement methods), if the procurement subjects are still required to be tested, audited, accredited and certified by the government agencies, such a process falls under the scope of administrative fees collection, pursuant to paragraph 1 Article 7 of the Charges And Fees Act. However, considering that the item subject to test, audit, accreditation and certification may be in a trial or promotional period, or that it may be necessary to motivate tenderer participation, the provisions of paragraph 3 are thusly added to the Article to reduce, waive, or suspend the collection of aforementioned fees. Executive authorities in charge of collecting administrative fees shall proceed to reduce, waive, or suspend the collection pursuant to the stipulations of paragraph 3 of the Article and Article 12 subparagraph 7 of the Charges And Fees Act.[9] III.The direction of devising supporting measures of flexible mechanism for innovation procurement   The latest amendment of the Statute for Industrial Innovation was promulgated and enacted on November 22, 2017, it is imperative that supporting measures pertaining to Article 27 of the Statute be formulated. As previously stated, the flexible mechanism for innovation procurement, as promoted in this Article, is designed specifically for the products or services that are pertinent to the government procurement requirements and are capable of stimulating industrial innovation, and providing a more flexible government procurement procedure for central authorities in charge of a specific industry as a policy approach in supporting industry innovation. Thus, the premise of devising relevant supporting measures is dependent on whether the specific industry, as overseen by the particular central authority, has a policy in place for promoting the development of industrial innovation, and on whether it is suitable in promoting the flexible mechanism for innovation procurement as described in this Article.   The purpose of this Article is to promote the flexible mechanism for innovation procurement. Supporting measures pertaining to this Article will focus on the promotion of devising an "Innovation Identification Method", and of the "Priority Procurement Process" of the innovative products or services of each industry that central government authorities oversee. The former will rely on each central government authority in charge of a specific industry to charter an industry-appropriate and profession-specific planning scheme; while, for the latter, the designing of a priority procurement process, in accordance with the nature of the various types of innovative products or services, does not have to be applicable to all. However, regardless what type of innovative products or services the priority procurement process is designed for, the general direction of consideration should be given to - taking the different qualities of innovative products or services as the core consideration. Additionally, the attribute of the priority procurement procedures focusing specifically on the different qualities of the innovative subjects relates to the special regulation relevant to the government procurement regulations. Thus, the procurement procedures should follow the principle that if no applicable stipulation is found in the special regulation, the provisions of the principal regulation shall apply.   The so-called "Priority Procurement" process refers to the "Preferential Contract Awarding" on tenders that meet certain criteria in a government procurement procedure. The existing Government Procurement Act (GPA, for short) and its related laws that have specific stipulations on "Priority Procurement" can be found in the "Regulations for Priority Procurement of Eco-Products" (Regulations for Eco-Products Procurement, for short), and the "Regulations for Obliged Purchasing Units / Institutions to Purchase the Products and Services Provided by Disabled Welfare Institutions, Organizations or Sheltered Workshops" (Regulations for Priority Procurement of Products or Services for Disabled or Shelters, for short). After studying these two measures, the priority procurement procedures applicable to criteria-conformed subjects can be summarized into the following two types: 1.The first type: Giving preferential contract awarding to the tenderer who qualifies with "the lowest tender price”, as proposed in the tender document, and who meets a certain criteria (for example, tenderers of environmental products, disabled welfare institutions, or sheltered workshops). There are two scenarios: When a general tenderer and the criteria-conformed tenderer both submit the lowest tender price, the criteria-conformed tenderer shall obtain the right to be the "preferential winning tender" without having to go through the Price Comparison and Reduction Procedures. Additionally, if the lowest tender price is submitted by a general tenderer, then the criteria-conformed tenderers have the right to a "preferential price reduction” option, that is, the criteria-conformed tenderers can be contacted, in ascending order of the tender submitted, with a one time option to reduce their bidding prices. The first tenderer who reduces their price to the lowest amount shall win the tender. Both the Regulations for Eco-Products Procurement[10] and Regulations for Priority Procurement of Products or Services for Disabilities or Shelters[11] have such relevant stipulations. 2.The second type: It is permitted to give Preferential Contract Awarding to a criteria-conformed tenderer, when the submitted tender is within the rate of price preference. When the lowest tenderer is a general tenderer, and the tender submitted by the criteria-conformed tenderer is higher than the lowest tender price, the law permits that if the tender submitted is "within the rate of price preference ", as set by the procuring entity, the procuring entity may award the contract preferentially to "the tender submitted by the criteria-conformed tenderer." The premise for allowing this method is that the tender submitted by the criteria-conformed tenderer must be within the preferential price ratio. If the submitted tender is higher than the preferential price ratio, then the criteria-conformed tenderer does not have the right to preferential contract awarding. The contract will be awarded to theother criteria-conformed tenderer, or to a general tenderer. This method is covered in the provisions of the Regulations for Eco-Products Procurement[12].   However, the important premise for the above two priority procurement methods is that the nature of the subject matter of the tender is suitable for adopting the awarding principle of the lowest tender (Article 52, Paragraph 1, Subparagraphs 1 and 2 of the Procurement Act), that is, it is difficult to apply these methods to the subjects if they are different qualities. Pursuant to the provisions of Article 66 of the Enforcement Rules of the Government Procurement Act, the so-called "different qualities" refers to the construction work, property or services provided by different suppliers that are different in technology, quality, function, performance, characteristics, commercial terms, etc. Subjects of different qualities are essentially difficult to compare when based on the same specifications. If just looking at pricing alone it is difficult to identify the advantages and disadvantages of the subjects, hence, the awarding principle of the lowest tender is not appropriate. The innovative subjects are essentially subjects of different qualities, and under the same consideration, they are not suitable for applying the awarding principle of the lowest tender. Therefore, it is difficult to adopt the lowest-tender-based priority procurement method for the procurement of innovative subjects.   In the case of innovative subjects with different qualities, the principle of the most advantageous tender should be adopted (Article 52 Paragraph 1 Subparagraph 3 of the Procurement Act) to identify the most qualified vender of the subjects through open selection. Therefore, the procedure for the priority procurement of innovative subjects with different qualities should be based on the most advantageous tender principle with focus on the "innovativeness" of the subjects, and consideration on how to give priority to tenderers, who qualify with the criteria of innovation. Pursuant to the provisions of Article 56 Paragraph 4 of the Procurement Act, the Procurement and Public Construction Commission has established the "Regulations for Evaluation of the Most Advantageous Tender". The tendering authorities adopting the most advantageous tender principle should abide by the evaluation method and procedures delineated in the method, and conduct an open selection of a winning tender. According to the Regulations for Evaluation of the Most Advantageous Tender, in addition to pricing, the tenderers' technology, quality, function, management, commercial terms, past performance of contract fulfillment, financial planning, and other matters pertaining to procurement functions or effectiveness, maybe chosen as evaluation criteria and sub-criteria. According to the three evaluation methods delineated in the provisions of Article 11 of the Regulations for Evaluation of the Most Advantageous Tender (overall evaluation score method, price per score point method, and ranking method), pricing could not been included in the scoring. That is, "the prices of the subjects" is not the absolute criterion of evaluation of the most advantageous tender process.   The priority procurement procedures designed specifically for innovative subjects with different qualities may adopt an evaluation method that excludes "pricing" as part of the scoring criterion so as to give innovative subject tenderers the opportunity to be more competitive in the bidding evaluation process, and due to the extent of their innovativeness, obtain the right to preferential tenders. If it must be included in the scoring, the percentage of the total score for pricing should be reduced from its usual ratio[13], while stipulating explicitly that "innovation" must be included as part of the evaluation criteria. In addition, its weight distribution should not be less than a ratio that highlights the importance of innovation in the evaluation criteria. Furthermore, when determining how to give preference to tenderers who meet certain innovation criteria in the contract awarding procedures, care should be taken to stay on focus with the degree of innovation of the subject (the higher the degree of innovation, the higher the priority), rather than giving priority to arbitrary standards. In summary, with consideration of priority procurement procedures designed specifically for innovative subjects with different qualities, this paper proposes the following preliminary regulatory directions: 1.Adopt the awarding principle of the most advantageous tender. 2.Explicitly stipulate the inclusion of "innovation" in the evaluation criteria and sub-criteria, and its ratio, one that indicates its importance, should not be less than a certain percentage of the total score (for example 20%). 3.Reduce the distributed ratio of "price" in the scoring criteria in the open selection. 4.After the members of the evaluation committee have concluded the scoring, if more than two tenderers have attained the same highest overall evaluated score or lowest quotient of price divided by overall evaluated score, or more than two tenderers have attained the first ranking, the contract is awarded preferentially to the tenderer who scores the highest in the "innovation" criterion. 5.When multiple awards (according to Article 52 Paragraph 1 Subparagraph 4 of the Procurement Act) are adopted, that is, there is more than one final winning tender, the procuring entity may select the tenderers with higher innovation scores as the price negotiation targets for contract awarding, when there are more than two tenderers with the same ranking.   Using the above method to highlight the value of innovative subjects will make these suppliers more competitive, because of their innovativeness ratings in the procurement procedures, and not confine them to the limitation of price-determination. So that, subject suppliers with a high degree of innovation, may attain the right to the preferential contract awarding that they deserve due to their innovativeness, and the procuring entity can purchase suitable innovative products in a more efficient and easy process. It also lowers the threshold for tenderers with innovation energy to enter the government procurement market, thus achieving the goal of supporting industrial innovation and creating a win-win scenario for supply and demand. [1] Cross-reference Table of Amended Provisions of the Statute for Industrial Innovation, The Ministry of Economic Affairs, https://www.moea.gov.tw/MNS/populace/news/wHandNews_File.ashx?file_id=59099 (Last viewed date: 12/08/2017). [2] According to the Guidance for public authorities on Public Procurement of Innovation issued by the Procurement of Innovation Platform in 2015, the so-called innovation procurement in essence refers to that the public sector can obtain innovative products, services, or work by using the government procurement processes, or that the public sector can administer government procurement with a new-and-better process. Either way, the implementation of innovation procurement philosophy is an important link between government procurement, R & D and innovation, which shortens the distance between the foresighted emerging technologies/processes and the public sector/users. [3] The EU's innovative procurement mechanism comprises the "Public Procurement of Innovation Solutions" (PPI Solutions) and "Pre-Commercial Procurement" (PCP). The former is one of the government procurement procedures, explicitly regulated in the new EU Public Procurement Directive (Directive 2014/24 / EU), for procuring solutions that are innovative, near or in preliminary commercial prototype; The latter is a procurement process designed to assist the public sector in obtaining technological innovative solutions that are not yet in commercial prototype, must undergo research and development process, and are not within the scope of EU Public Procurement Directive. [4] The "software, innovative and green products or services", as described in paragraph 1 of Article 27 of the amended Statute for Industrial Innovation, refers to, respectively, "software", "innovative products or services", and "green products or services" in general. There is no co-ordination or subordination relationship between the three; the same applies to "innovative and green products or services" in paragraph 4. [5] Article 93 of the Government Procurement Act stipulates: "An entity may execute an inter-entity supply contract with a supplier for the supply of property or services that are commonly needed by entities." Additionally, Article 2 of the Regulations for The Implementation of Inter-entity Supply Contracts stipulates: "The term 'property or services that are commonly needed by entities' referred to in Article 93 of the Act means property or services which are commonly required by two or more entities. The term 'inter-entity supply contract (hereinafter referred to as the “Contract”)' referred to in Article 93 of the Act means that an entity, on behalf of two or more entities, signs a contract with a supplier for property or services that are commonly needed by entities, so that the entity and other entities to which the Contract applies can utilize the Contract to conduct procurements." Therefore, according to the interpretation made by the Public Construction Commission, the Executive Yuan (PCC, for short), organizations handling inter-entity supply contracts should first conduct a demand investigation. [6] In general, organizations in charge of handling the inter-entity supply contracts will disseminate official documents to applicable organizations with an invitation to furnish information online about their interests and estimated requirement (for budget estimation) at government's e-procurement website. However, in the case of more prospective subjects (such as cloud services of the emerging industry), it may be difficult for an organization to accurately estimate the demand when filling out the survey, resulting in a mismatch of data between the demand survey and actual needs. [7] In accordance with the authorization of paragraph 3 of the Article, the IDB has established "Regulations Governing Examination and Identification of Advanced Recycled Products by Ministry of Economic Affairs" (including an appendix: Identification Specification for Resource Regenerating Green Products), except that the priority procurement process was not stipulated, because the Resource Regenerating Green Products, that meet the requirements of the Ministry of Economic Affairs, are covered by the "Category III Products" in the provisions of Article 6 of the existing "Regulations for Priority Procurement of Eco-Products", set forth by the PPC and The Environmental Protection Administration of the Executive Yuan. Hence, organizations that have the requirement to procure green products, may proceed with priority procurement by following the regulations in the "Regulations for Priority Procurement of Eco-Products". [8] After the amendment of the Article, the "software" in the provisions of paragraph 1 was excluded in paragraph 4, because the objective of paragraph 4 is to promote industry innovation and sustainable development with the use of a more flexible government procurement procedure. Thus, the subjects of the priority procurement mechanism are focused on "innovative" and "green" products or services, which exclude popular "software" that has a common standard in the market. However, if it is an "innovative software", it may be included in the "innovative products or services" in the provisions of paragraph 4. [9] According to the provisions of Article 12 of the Charges And Fees Act: "In any of the following cases, the executive authority in charge of the concerned matters may waive or reduce the amount of the charges and fees, or suspend the collection of the charges and fees: 7. Waiver, reduction, or suspension made under other applicable laws." [10] Refer to Article 12, Paragraph 1, Subparagraphs 1 and Article 13, Paragraph 1 and 2 of Regulations for Priority Procurement of Eco-Products. [11] Refer to Article 4 of Regulations for Obliged Purchasing Units / Institutions to Purchase the Products and Services Provided by Disabled Welfare Institutions, Organizations or Sheltered Workshops. [12] Refer to Article 12, Paragraph 1, Subparagraphs 2 and Article 13, Paragraph 3 of Regulations for Priority Procurement of Eco-Products. [13] The provisions of paragraph 3 Article 16 of the Regulations for Evaluation of the Most Advantageous Tender stipulates: Where price is included in scoring, its proportion of the overall score shall be not less than 20% and not more than 50%.

Impact of Government Organizational Reform to Scientific Research Legal System and Response Thereto (2) – For Example, The Finnish Innovation Fund (“SITRA”)

Impact of Government Organizational Reform to Scientific Research Legal System and Response Thereto (2) – For Example, The Finnish Innovation Fund (“SITRA”) III. Comparison of Strength and Weakness of Sitra Projects 1. Sitra Venture Capital Investment Model   In order to comprehend how to boost innovation business development to upgrade innovation ability, we analyze and compare the innovation systems applied in Sweden, France and Finland[1] . We analyze and compare the characteristics, strength and weakness of innovation promotion models in terms of funding, networking and professional guidance. Generally, the first difficulty which a start-up needs to deal with when it is founded initially is the funding. Particularly, a technology company usually requires tremendous funding when it is founded initially. Some potentially adequate investors, e.g., venture capitals, seldom invest in small-sized start-up (because such overhead as supervision and management fees will account for a high percentage of the investment due to the small total investment amount). Networking means how a start-up integrates such human resources as the management, investors, technical advisors and IP professionals when it is founded initially. Control over such human resources is critical to a new company’s survival and growth. Professional guidance means how professional knowledge and human resource support the start-up’s operation. In order to make its product required by the market, an enterprise usually needs to integrate special professional knowledge. Notwithstanding, the professional knowledge and talents which are available from an open market theoretically often cannot be accessed, due to market failure[2].   Assuming that Sitra’s funding is prioritized as Pre-seed-Initiation stage, Seed-Development stage and Follow-up – Growth stage, under Finland model, at the Pre-seed-Initiation stage, Sitra will provide the fund amounting to EUR20,000 when Tekes will also provide the equivalent fund, provided that the latter purely provides subsidy, while the fund provided by Sitra means a loan to be repaid (without interest) after some time (usually after commercialization), or a loan convertible to shares. Then, the loan would be replaced by soft or convertible (to shares) investment and the source of funding would turn to be angel investors or local seed capital at the Seed-Development stage. At this stage, the angel investors, local seed capital and Sitra will act as the source of funding jointly in Finland, while Tekes will not be involved at this stage. At the Follow-up-Growth stage, like the Sweden model, Sitra will utilize its own investment fund to help mitigate the gap between local small-sized funding and large-sized international venture capital[3].   How to recruit professional human resources is critical to a start-up’s success. Many enterprises usually lack sufficient professional human resources or some expertise. DIILI service network set up by Sitra is able to provide the relevant solutions. DILLI is a network formed by product managers. Its members actively participate in starts-up and seek innovation. They also participate in investment of starts-up independently sometimes. Therefore, they are different from angel investors, because they devote themselves to the starts-up on a full-time basis[4]. In other words, they manage the starts-up as if the starts-up were their own business. 2. Key to Public Sector’s Success in Boosting Development of Innovation Activity Business   In terms of professional guidance, voluntary guidance means the direct supply of such professional resources as financing, human resource and technology to starts-up, while involuntary guidance means the supply of strategic planning in lieu of direct assistance to help the enterprises make routine decisions[5]. The fractured and incomplete professional service attendant market generates low marginal effect. Therefore, it is impossible for the traditional consultation service to mitigate such gap and the investment at the pre-seed initiation stage will be excessive because of the acquisition of the professional services. Meanwhile, professional advisors seldom are involved in consultation services at the pre-seed initiation stage of a start-up because of the low potential added value. Therefore, at such stage, only involuntary professional guidance will be available usually. Under Sitra model, such role is played by an angel investor.   Upon analysis and comparison, we propose six suggested policies to boost innovation activities successfully as the reference when observing Sitra operation. First of all, compared with the French model, Finland Sitra and Sweden model set more specific objectives to meet a start-up’s needs (but there is some defect, e.g., Sitra model lacks voluntary professional guidance). Second, structural budget is a key to the successful model. Sitra will receive the funds in the amount of EUR235,000,000 from the Finnish Government, but its operating expenditure is covered by its own operating revenue in whole. Third, it is necessary to provide working fund in installments and provide fund at the pre-seed-initiation stage. Under both of Finland model and Sweden model, funds will be provided at the pre-seed-initiation stage (Tekes is responsible for providing the fund in Finland). Fourth, the difficulty in networking must be solved. In Sitra, the large-sized talent network set up by it will be dedicated to recruiting human resources. Fifth, the voluntary professional guidance is indispensable at the pre-seed-initiation stage, while the same is unavailable at such stage under Sitra model. Instead, the Sweden model is held as the optimal one, as it has a dedicated unit responsible for solving the difficulty to seek profit. Sixth, soft loan[6] will be successfully only when the loan cannot be convertible to shares. At the pre-seed initiation stage or seed-development stage, a start-up is usually funded by traditional loan. Assuming that the start-up is not expected to gain profit, whether the loan may be convertible to shares will also be taken into consideration when the granting of loan is considered (therefore, the fund provider will not be changed to the “capital” provider). Besides, the government authorities mostly lack the relevant experience or knowledge, or are in no position to negotiate with international large-sized venture capital companies. For example, under the French model, the government takes advantage of its power to restrict the venture capital investment and thereby renders adverse impact to starts-up which seek venture capital. Finally, the supply of own fund to meet the enterprises’ needs at seed-development stage and follow-up-growth stage to mitigate the gap with large-sized venture capital[7] is also required by a successful funding model. IV. Conclusion-Deliberation of Finnish Sitra Experience   As the leading national industrial innovation ability promoter in Finland, Sitra appears to be very characteristic in its organizational framework or operating mechanism. We hereby conclude six major characteristics of Sitra and propose the potential orientation toward deliberation of Taiwan’s industrial innovation policies and instruments. 1. Particularity of Organizational Standing   In consideration of the particularity of Sitra organizational standing, it has two characteristics observable. First, Sitra is under supervision of the Finnish Parliament directly, not subordinated to the administrative organizational system and, therefore, it possesses such strength as flexibility and compliance with the Parliament’s requirements. Such organization design which acts independently of the administrative system but still aims to implement policies has been derived in various forms in the world, e.g., the agency model[8] in the United Kingdom, or the independent apparatus in the U.S.A. Nevertheless, to act independently of the administrative system, it has to deal with the deliberation of responsible political principles at first, which arouses the difficulty in taking care of flexibility at the same time. In Taiwan, the intermediary organizations include independent agencies and administrative corporations, etc., while the former still involves the participation of the supreme administrative head in the right of personnel administration and is subordinated to the ministries/departments of the Executive Yuan and the latter aims to enforce the public missions in the capacity of “public welfare” organization. Though such design as reporting to the Parliament directly is not against the responsible political principles, how the Parliament owns the authority to supervise is the point (otherwise, theoretically, the administrative authorities are all empowered by the parliament in the country which applies the cabinet system). Additionally, why some special authorities are chosen to report to the parliament directly while other policy subjects are not is also disputable. The existence of Sitra also refers to a circumstantial evidence substantiating that Finland includes the innovation policy as one of the important government policies, and also the objective fact that Finland’s innovation ability heads the first in the world.   Second, Sitra is a self-sufficient independent fund, which aims to promote technical R&D and also seeks profit for itself, irrelevant with selection of adequate investment subjects or areas. Instead, for this purpose, the various decisions made by it will deal with the utility and mitigate the gap between R&D and market. Such entity is responsible for public welfare or policy projects and also oriented toward gain from investment to feed the same back to the individuals in the organization. In the administrative system, Sitra is not directed by the administrative system but reports to the Parliament directly. Sitra aims to upgrade the national R&D innovation ability as its long-term goal mission and utilizes the promotion of innovation business and development of venture capital market. The mission makes the profit-orientation compatible with the selection of investment subjects, as an enterprise unlikely to gain profit in the future usually is excluded from the national development view. For example, such industries as green energy, which is not likely to gain profit in a short term, is still worth investing as long as it meets the national development trend and also feasible (in other words, selection of marketable green technology R&D, instead of comparison of the strength and weakness in investment value of green energy and other high-polluted energy). 2. Expressly Distinguished From Missions of Other Ministries/Departments   For the time being, Sitra primarily invests in starts-up, including indirect investment and direct investment, because it relies on successful new technology R&D which may contribute to production and marketability. Starts-up have always been one of the best options, as large-sized enterprises are able to do R&D on their own without the outsourcing needs. Further, from the point of view of an inventor, if the new technology is marketable, it will be more favorable to him if he chooses to start business on his own or make investment in the form of partnership, instead of transfer or license of the ownership to large-sized enterprises (as large-sized enterprises are more capable of negotiation). However, note that Sitra aims to boost innovation activities and only targets at start-up business development, instead of boosting and promoting the start-up per se. Under the requirement that Sitra needs to seek profit for itself, only the business with positive development view will be targeted by Sitra. Further, Sitra will not fund any business other than innovation R&D or some specific industries. Apparently, Sitra only focuses on the connection between innovation activities and start-up, but does not act as the competent authority in charge of small-sized and medium-sized enterprises.   Meanwhile, Sitra highlights that it will not fund academic research activities and, therefore, appears to be distinguished from the competent authority in charge of national scientific research. Though scientific research and technology innovation business, to some extent, are distinguished from each other in quantity instead of quality, abstract and meaningless research is existent but only far away from the commercialization market. Notwithstanding, a lot of countries tend to distinguish basic scientific research from industrial technology R&D in the administration organization's mission, or it has to be. In term of the way in which Sitra carries out its mission, such distinguishing ability is proven directly. 3. Well-Founded Technology Foresight-Based Investment Business   The corporate investments, fund investments and project funding launched by Sitra are all available to the pre-designated subjects only, e.g. ecological sustainable development, energy utilization efficiency, and social structural changes, etc. Such way to promote policies as defining development area as the first priority and then promoting the investment innovation might have some strength and weakness at the same time. First of all, the selection of development areas might meet the higher level national development orientation more therefor, free from objective environmental restrictions, e.g. technical level, leading national technology industries and properties of natural resources. Notwithstanding, an enterprise’s orientation toward innovation R&D might miss the opportunity for other development because of the pre-defined framework. Therefore, such way to promote policies as defining development areas or subjects as the first priority will be inevitably based on well-founded technology foresight-based projects[9], in order to take various subjective and objective conditions into consideration and to forecast the technology development orientation and impact to be faced by the home country’s national and social economies. That is, said strength and weakness will be taken into consideration beforehand for foresight, while following R&D funding will be launched into the technology areas pre-designated after thorough analysis. 4. Self-Interested Investment with the Same High Efficiency as General Enterprises   Sitra aims to gain profit generally, and its individual investment model, e.g., DIILI, also permits marketing managers to involve business operation. The profit-sharing model enables Sitra to seek the same high efficiency as the general enterprises when purusing its innovation activity development. The investment launched by Sitra highlights that it is not “funding” (which Tekes is responsible for in Finland) or the investment not requiring return. Therefore, it has the system design to acquire corporate shares. Sitra participates in a start-up by offering its advanced technology, just like a general market investor who will choose the potential investment subject that might benefit him most upon his personal professional evaluation. After all, the ultimate profit will be retained by Sitra (or said DIILI manger, subject to the investment model). Certainly, whether the industry which requires permanent support may benefit under such model still remains questionable. However, except otherwise provided in laws expressly, said special organization standing might be a factor critical to Sitra profit-seeking model. That is, Sitra is not subordinated to the administrative system but is under supervision of the parliament independently, and how its staff deal with the conflict of interest issues in the capacity other than the public sector’s/private sector’s staff is also one of the key factors to success of the system. 5. Investment Model to Deal With Policy Instruments of Other Authorities/Agencies   Sitra decides to fund a start-up depending on whether it may gain profit as one of its priorities. As aforesaid, we may preliminarily recognize that the same should be consistent with funding to starts-up logically and no “government failure” issue is involved. For example, the funding at the pre-seed-initiation stage needs to tie in with Tekes’ R&D “funding” (and LIKSA service stated herein) and, therefore, may adjust the profit-seeking orientation, thereby causing deviation in promotion of policies. The dispute over fairness of repeated subsidy/funding and rationality of resource allocation under the circumstance must be controlled by a separate evaluation management mechanism inevitably. 6. Affiliation with Enhancement of Regional Innovation Activities   Regional policies cannot be separable from innovation policies, especially in a country where human resources and natural resources are not plentiful or even. Therefore, balancing regional development policies and also integrating uneven resource distribution at the same time is indispensable to upgrading of the entire national social economic benefits. The Finnish experience indicated that innovation activities ought to play an important role in the regional development, and in order to integrate enterprises, the parties primarily engaged in innovation activities, with the R&D ability of regional academic research institutions to upgrade the R&D ability effectively, the relevant national policies must be defined for adequately arranging and launching necessary resources. Sitra's approaches to invest in starts-up, release shares after specific period, integrate the regional resources, upgrade the national innovation ability and boost the regional development might serve to be the reference for universities’ centers of innovative incubator or Taiwan’s local academic and scientific sectors[10] to improve their approaches.   For the time being, the organization engaged in venture capital investment in the form of fund in Taiwan like Sitra of Finland is National Development Fund, Executive Yuan. However, in terms of organizational framework, Sitra is under supervision of the Parliament directly, while National Development Fund is subordinated to the administrative system of Taiwan. Though Sitra and National Development Fund are both engaged in venture capital investments primarily, Sitra carries out its missions for the purpose of “promoting innovative activities”, while the National Development Fund is committed to achieve such diversified goals as “promoting economic changes and national development[11]” and is required to be adapted to various ministries’/departments’ policies. Despite the difference in the administrative systems of Taiwan and Finland, Sitra system is not necessarily applicable to Taiwan. Notwithstanding, Sitra’s experience in promotion and thought about the system might provide a different direction for Taiwan to think when it is conceiving the means and instruments for industrial innovation promotion policies in the future. [1] Bart Clarysse & Johan Bruneel, Nurturing and Growing Innovation Start-Ups: The Role of Policy As Integrator, R&D MANAGEMENT, 37(2), 139, 144-146 (2007). Clarysse & Bruneel analysis and comparison refers to Sweden Chalmers Innovation model, French Anvar/Banque de Developpement des PMEs model and Finland Sitra PreSeed Service model. [2] id. at 141-143. [3] id. at 141. [4] id. at 145-146. [5] id. at 143. [6] The loan to be repaid is not a concern. For example, the competent authority in Sweden only expects to recover one-fourths of the loan. [7] Clarysse & Bruneel, super note 26, at 147-148. [8] 彭錦鵬,〈英國政署之組織設計與運作成效〉,《歐美研究》,第30卷第3期,頁89-141。 [9] Technology foresight must work with the innovation policy road mapping (IPRM) interactively, and consolidate the forecast and evaluation of technology policy development routes. One study case about IPRM of the environmental sustainable development in the telecommunication industry in Finland, the IPRM may enhance the foresighted system and indicates the potential factors resulting in systematic failure. Please see Toni Ahlqvist, Ville Valovirta & Torsti Loikkanen, Innovation policy road mapping as a systemic instrument for forward-looking policy design, Science and Public Policy 39, 178-190 (2012). [10] 參見李昂杰,〈規範新訊:學界科專辦法及其法制配套之解析〉,《科技法律透析》,第23卷第8期,頁33(2011)。 [11] National Development Fund, Executive Yuan website, http://www.df.gov.tw/(tftgkz45150vye554wi44ret)/page-aa.aspx?Group_ID=1&Item_Title=%E8%A8%AD%E7%AB%8B%E5%AE%97%E6%97%A8#(Last visit on 2013/03/28)

TOP