Finland’s Technology Innovation System
I. Introduction
When, Finland, this country comes to our minds, it is quite easy for us to associate with the prestigious cell-phone company “NOKIA”, and its unbeatable high technology communication industry. However, following the change of entire cell-phone industry, the rise of smart phone not only has an influence upon people’s communication and interaction, but also makes Finland, once monopolized the whole cell-phone industry, feel the threat and challenge coming from other new competitors in the smart phone industry. However, even though Finland’s cell-phone industry has encountered frustrations in recent years in global markets, the Finland government still poured many funds into the area of technology and innovation, and brought up the birth of “Angry Birds”, one of the most popular smart phone games in the world. The Finland government still keeps the tradition to encourage R&D, and wishes Finland’s industries could re-gain new energy and power on technology innovation, and indirectly reach another new competitive level.
According to the Statistics Finland, 46% Finland’s enterprises took innovative actions upon product manufacturing and the process of R&D during 2008-2010; also, the promotion of those actions not merely existed in enterprises, but directly continued to the aspect of marketing and manufacturing. No matter on product manufacturing, the process of R&D, the pattern of organization or product marketing, we can observe that enterprises or organizations make contributions upon innovative activities in different levels or procedures. In the assignment of Finland’s R&D budgets in 2012, which amounted to 200 million Euros, universities were assigned by 58 million Euros and occupied 29% R&D budgets. The Finland Tekes was assigned by 55 million Euros, and roughly occupied 27.5% R&D budgets. The Academy of Finland (AOF) was assigned by 32 million Euros, and occupied 16% R&D budges. The government’s sectors were assigned by 3 million Euros, and occupied 15.2% R&D budgets. Other technology R&D expenses were 2.1 million Euros, and roughly occupied 10.5% R&D. The affiliated teaching hospitals in universities were assigned by 0.36 million Euros, and occupied 1.8% R&D budgets. In this way, observing the information above, concerning the promotion of technology, the Finland government not only puts more focus upon R&D innovation, but also pays much attention on education quality of universities, and subsidizes various R&D activities. As to the Finland government’s assignment of budges, it can be referred to the chart below.
As a result of the fact that Finland promotes industries’ innovative activities, it not only made Finland win the first position in “Growth Competitiveness Index” published by the World Economic Forum (WEF) during 2000-2006, but also located the fourth position in 142 national economy in “The Global Competitiveness Report” published by WEF, preceded only by Swiss, Singapore and Sweden, even though facing unstable global economic situations and the European debt crisis. Hence, observing the reasons why Finland’s industries have so strong innovative power, it seems to be related to the Finland’s national technology administrative system, and is worthy to be researched.
II. The Recent Situation of Finland’s Technology Administrative System
A. Preface
Finland’s administrative system is semi-presidentialism, and its executive power is shared by the president and the Prime Minister; as to its legislative power, is shared by the Congress and the president. The president is the Finland’s leader, and he/she is elected by the Electoral College, and the Prime Minister is elected by the Congress members, and then appointed by the president. To sum up, comparing to the power owned by the Prime Minister and the president in the Finland’s administrative system, the Prime Minister has more power upon executive power. So, actually, Finland can be said that it is a semi-predisnetialism country, but trends to a cabinet system.
Finland technology administrative system can be divided into four parts, and the main agency in each part, based upon its authority, coordinates and cooperates with making, subsidizing, executing of Finland’s technology policies. The first part is the policy-making, and it is composed of the Congress, the Cabinet and the Research and Innovation Council; the second part is policy management and supervision, and it is leaded by the Ministry of Education and Culture, the Ministry of Employment and the Economy, and other Ministries; the third part is science program management and subsidy, and it is composed of the Academy of Finland (AOF), the National Technology Agency (Tekes), and the Finnish National Fund Research and Development (SITRA); the fourth part is policy-executing, and it is composed of universities, polytechnics, public-owned research institutions, private enterprises, and private research institutions. Concerning the framework of Finland’s technology administrative, it can be referred to below.
B. The Agency of Finland’s Technology Policy Making and Management
(A) The Agency of Finland’s Technology Policy Making
Finland’s technology policies are mainly made by the cabinet, and it means that the cabinet has responsibilities for the master plan, coordinated operation and fund-assignment of national technology policies. The cabinet has two councils, and those are the Economic Council and the Research and Innovation Council, and both of them are chaired by the Prime Minister. The Research and Innovation Council is reshuffled by the Science and Technology Policy Council (STPC) in 1978, and it changed name to the Research and Innovation Council in Jan. 2009. The major duties of the Research and Innovation Council include the assessment of country’s development, deals with the affairs regarding science, technology, innovative policy, human resource, and provides the government with aforementioned schedules and plans, deals with fund-assignment concerning public research development and innovative research, coordinates with all government’s activities upon the area of science, technology, and innovative policy, and executes the government’s other missions.
The Research and Innovation Council is an integration unit for Finland’s national technology policies, and it originally is a consulting agency between the cabinet and Ministries. However, in the actual operation, its scope of authority has already covered coordination function, and turns to direct to make all kinds of policies related to national science technology development. In addition, the consulting suggestions related to national scientific development policies made by the Research and Innovation Council for the cabinet and the heads of Ministries, the conclusion has to be made as a “Key Policy Report” in every three year. The Report has included “Science, Technology, Innovation” in 2006, “Review 2008” in 2008, and the newest “Research and Innovation Policy Guidelines for 2011-2015” in 2010.
Regarding the formation and duration of the Research and Innovation Council, its duration follows the government term. As for its formation, the Prime Minister is a chairman of the Research and Innovation Council, and the membership consists of the Minister of Education and Science, the Minister of Economy, the Minister of Finance and a maximum of six other ministers appointed by the Government. In addition to the Ministerial members, the Council shall comprise ten other members appointed by the Government for the parliamentary term. The Members must comprehensively represent expertise in research and innovation. The structure of Council includes the Council Secretariat, the Administrative Assistant, the Science and Education Subcommittee, and the Technology and Innovation Subcommittee. The Council has the Science and Education Subcommittee and the Technology and Innovation Subcommittee with preparatory tasks. There are chaired by the Ministry of Education and Science and by the Minister of Economy, respectively. The Council’s Secretariat consists of one full-time Secretary General and two full-time Chief Planning Officers. The clerical tasks are taken care of at the Ministry of Education and Culture.
(B) The Agency of Finland’s Technology Policy Management
The Ministries mainly take the responsibility for Finland’s technology policy management, which includes the Ministry of Education and Culture, the Ministry of Employment and Economy, the Ministry of Social Affairs and Health, the Ministry of Agriculture and Forestry, the Ministry of Defense, the Ministry of Transport and Communication, the Ministry of Environment, the Ministry of Financial, and the Ministry of Justice. In the aforementioned Ministries, the Ministry of Education and Culture and the Ministry of Employment and Economy are mainly responsible for Finland national scientific technology development, and take charge of national scientific policy and national technical policy, respectively. The goal of national scientific policy is to promote fundamental scientific research and to build up related scientific infrastructures; at the same time, the authority of the Ministry of Education and Culture covers education and training, research infrastructures, fundamental research, applied research, technology development, and commercialization. The main direction of Finland’s national scientific policy is to make sure that scientific technology and innovative activities can be motivated aggressively in universities, and its objects are, first, to raise research funds and maintain research development in a specific ratio; second, to make sure that no matter on R&D institutions or R&D training, it will reach fundamental level upon funding or environment; third, to provide a research network for Finland, European Union and global research; fourth, to support the research related to industries or services based upon knowledge-innovation; fifth, to strengthen the cooperation between research initiators and users, and spread R&D results to find out the values of commercialization, and then create a new technology industry; sixth, to analyze the performance of national R&D system.
As for the Ministry of Employment and Economy, its major duties not only include labor, energy, regional development, marketing and consumer policy, but also takes responsibilities for Finland’s industry and technical policies, and provides industries and enterprises with a well development environment upon technology R&D. The business scope of the Ministry of Employment and Economy puts more focus on actual application of R&D results, it covers applied research of scientific technology, technology development, commercialization, and so on. The direction of Finland’s national technology policy is to strengthen the ability and creativity of industries’ technology development, and its objects are, first, to develop the new horizons of knowledge with national innovation system, and to provide knowledge-oriented products and services; second, to promote the efficiency of the government R&D funds; third, to provide cross-country R&D research networks, and support the priorities of technology policy by strengthening bilateral or multilateral cooperation; fourth, to raise and to broaden the efficiency of research discovery; fifth, to promote the regional development by technology; sixth, to evaluate the performance of technology policy; seventh, to increase the influence of R&D on technological change, innovation and society; eighth, to make sure that technology fundamental structure, national quality policy and technology safety system will be up to international standards.
(C) The Agency of Finland’s Technology Policy Management and Subsidy
As to the agency of Finland’s technology policy management and subsidy, it is composed of the Academy of Finland (AOF), the National Technology Agency (Tekes), and the Finnish National Fund Research and Development (SITRA). The fund of AOF comes from the Ministry of Education and Culture; the fund of Tekes comes from the Ministry of Employment and Economy, and the fund of SITRA comes from independent public fund supervised by the Finland’s Congress.
(D) The Agency of Finland’s Technology Plan Execution
As to the agency of Finland’s technology plan execution, it mainly belongs to the universities under Ministries, polytechnics, national technology research institutions, and other related research institutions. Under the Ministry of Education and Culture, the technology plans are executed by 16 universities, 25 polytechnics, and the Research Institute for the Language of Finland; under the Ministry of Employment and Economy, the technology plans are executed by the Technical Research Centre of Finland (VTT), the Geological Survey of Finnish, the National Consumer Research Centre; under the Ministry of Social Affairs and Health, the technology plans are executed by the National Institute for Health and Welfare, the Finnish Institute of Occupational Health, and University Central Hospitals; under the Ministry of Agriculture and Forestry, the technology plans are executed by the Finnish Forest Research Institute (Metla), the Finnish Geodetic Institute, and the Finnish Game and Fisheries Research Institute (RKTL); under the Ministry of Defense, the technology plans are executed by the Finnish Defense Forces’ Technical Research Centre (Pvtt); under the Ministry of Transport and Communications, the technology plans are executed by the Finnish Meteorological Institute; under the Ministry of Environment, the technology plans are executed by the Finnish Environment Institute (SYKE); under the Ministry of Financial, the technology plans are executed by the Government Institute for Economic Research (VATT). At last, under the Ministry of Justice, the technology plans are executed by the National Research Institute of Legal Policy.
Impact of Government Organizational Reform to Research Legal System and Response Thereto (2) – Observation of the Swiss Research Innovation System I. Foreword Switzerland is a landlocked country situated in Central Europe, spanning an area of 41,000 km2, where the Alps occupy 60% of the territory, while it owns little cultivated land and poor natural resources. In 2011, its population was about 7,950,000 persons[1]. Since the Swiss Federal was founded, it has been adhering to a diplomatic policy claiming neutrality and peace, and therefore, it is one of the safest and most stable countries in the world. Switzerland is famous for its high-quality education and high-level technological development and is very competitive in biomedicine, chemical engineering, electronics and metal industries in the international market. As a small country with poor resources, the Swiss have learnt to drive their economic and social development through education, R&D and innovation a very long time ago. Some renowned enterprises, including Nestle, Novartis and Roche, are all based in Switzerland. Meanwhile, a lot of creative small-sized and medium-sized enterprises based in Switzerland are dedicated to supporting the export-orientation economy in Switzerland. Switzerland has the strongest economic strength and plentiful innovation energy. Its patent applications, publication of essay, frequencies of quotation and private enterprises’ innovation performance are remarkable all over the world. According to the Global Competitiveness Report released by the World Economic Forum (WEF), Switzerland has ranked first among the most competitive countries in the world for four years consecutively since 2009[2]. Meanwhile, according to the Global Innovation Index (GII) released by INSEAD and the World Intellectual Property Organization (WIPO) jointly, Switzerland has also ranked first in 2011 and 2012 consecutively[3]. Obviously, Switzerland has led the other countries in the world in innovation development and economic strength. Therefore, when studying the R&D incentives and boosting the industrial innovation, we might benefit from the experience of Switzerland to help boost the relevant mechanism in Taiwan. Taiwan’s government organization reform has been launched officially and boosted step by step since 2012. In the future, the National Science Council will be reformed into the “Ministry of Science and Technology”, and the Ministry of Economic Affairs into the “Ministry of Economy and Energy”, and the Department of Industrial Development into the “Department of Industry and Technology”. Therefore, Taiwan’s technology administrative system will be changed materially. Under the new government organizational framework, how Taiwan’s technology R&D and industrial innovation system divide work and coordinate operations to boost the continuous economic growth in Taiwan will be the first priority without doubt. Support of innovation policies is critical to promotion of continuous economic growth. The Swiss Government supports technological research and innovation via various organizations and institutions effectively. In recent years, it has achieved outstanding performance in economy, education and innovation. Therefore, we herein study the functions and orientation of the competent authorities dedicated to boosting research and innovation in Switzerland, and observe its policies and legal system applied to boost the national R&D in order to provide the reference for the functions and orientation of the competent authorities dedicated to boosting R&D and industrial innovation in Taiwan. II. Overview of Swiss Federal Technology Laws and Technology Administrative System Swiss national administrative organization is subject to the council system. The Swiss Federal Council is the national supreme administrative authority, consisting of 7 members elected from the Federal Assembly and dedicated to governing a Federal Government department respectively. Switzerland is a federal country consisting of various cantons that have their own constitutions, councils and governments, respectively, entitled to a high degree of independence. Article 64 of the Swiss Federal Constitution[4] requires that the federal government support research and innovation. The “Research and Innovation Promotion Act” (RIPA)[5] is dedicated to fulfilling the requirements provided in Article 64 of the Constitution. Article 1 of the RIPA[6] expressly states that the Act is enacted for the following three purposes: 1. Promoting the scientific research and science-based innovation and supporting evaluation, promotion and utilization of research results; 2. Overseeing the cooperation between research institutions, and intervening when necessary; 3. Ensuring that the government funding in research and innovation is utilized effectively. Article 4 of the RIPA provides that the Act shall apply to the research institutions dedicated to innovation R&D and higher education institutions which accept the government funding, and may serve to be the merit for establishment of various institutions dedicated to boosting scientific research, e.g., the National Science Foundation and Commission of Technology & Innovation (CTI). Meanwhile, the Act also provides detailed requirements about the method, mode and restriction of the government funding. According to the RIPA amended in 2011, the Swiss Federal Government’s responsibility for promoting innovation policies has been extended from “promotion of technology R&D” to “unification of education, research and innovation management”, making the Swiss national industrial innovation framework more well-founded and consistent[8] . Therefore, upon the government organization reform of Switzerland in 2013, most of the competent authorities dedicated to technology in Swiss have been consolidated into the Federal Department of Economic Affairs, Education and Research. Under the framework, the Swiss Federal Government assigned higher education, job training, basic scientific research and innovation to the State Secretariat for Education, Research and Innovation (SERI), while the Commission of Technology & Innovation (CTI) was responsible for boosting the R&D of application scientific technology and industrial technology and cooperation between the industries and academy. The two authorities are directly subordinate to the Federal Department of Economic Affairs, Education and Research (EAER). The Swiss Science and Technology Council (SSTC), subordinate to the SERI is an advisory entity dedicated to Swiss technology policies and responsible for providing the Swiss Federal Government and canton governments with the advice and suggestion on scientific, education and technology innovation policies. The Swiss National Science Foundation (SNSF) is an entity dedicated to boosting the basic scientific R&D, known as the two major funding entities together with CTI for Swiss technology R&D. The organizations, duties, functions and operations of certain important entities in the Swiss innovation system are introduced as following. Date source: Swiss Federal Department of Economic Affairs, Education and Research official website Fig. 1 Swiss Innovation Framework Dedicated to Boosting Industries－Swiss Federal Economic, Education and Research Organizational Chart 1. State Secretariat of Education, Research and Innovation (SERI) SERI is subordinate to the Department of Economic Affairs, Education and Research, and is a department of the Swiss Federal Government dedicated to managing research and innovation. Upon enforcement of the new governmental organization act as of January 1, 2013, SERI was established after the merger of the State Secretariat for Education and Research, initially subordinate to Ministry of Interior, and the Federal Office for Professional Education and Technology (OEPT), initially subordinated to Ministry of Economic Affairs. For the time being, it governs the education, research and innovation (ERI). The transformation not only integrated the management of Swiss innovation system but also unified the orientations toward which the research and innovation policy should be boosted. SERI’s core missions include “enactment of national technology policies”, “coordination of research activities conducted by higher education institutions, ETH, and other entities of the Federal Government in charge of various areas as energy, environment, traffic and health, and integration of research activities conducted by various government entities and allocation of education, research and innovation resources. Its functions also extend to funding the Swiss National Science Foundation (SNSF) to enable SNSF to subsidize the basic scientific research. Meanwhile, the international cooperation projects for promotion of or participation in research & innovation activities are also handled by SERI to ensure that Switzerland maintains its innovation strength in Europe and the world. The Swiss Science and Technology Council (SSTC) is subordinate to SERI, and also the advisory unit dedicated to Swiss technology policies, according to Article 5a of RIPA[9]. The SSTC is responsible for providing the Swiss Federal Government and canton governments with advice and suggestion about science, education and innovation policies. It consists of the members elected from the Swiss Federal Council, and a chairman is elected among the members. 2. Swiss National Science Foundation (SNSF) The Swiss National Science Foundation (SNSF) is one of the most important institutions dedicated to funding research, responsible for promoting the academic research related to basic science. It supports about 8,500 scientists each year. Its core missions cover funding as incentives for basic scientific research. It grants more than CHF70 million each year. Nevertheless, the application science R&D, in principle, does not fall in the scope of funding by the SNSF. The Foundation allocates the public research fund under the competitive funding system and thereby maintains its irreplaceable identity, contributing to continuous output of high quality in Switzerland. With the support from the Swiss Federal Government, the SNSF was established in 1952. In order to ensure independence of research, it was planned as a private institution when it was established[10]. Though the funding is provided by SERI, the SNSF still has a high degree of independence when performing its functions. The R&D funding granted by the SNSF may be categorized into the funding to free basic research, specific theme-oriented research, and international cooperative technology R&D, and the free basic research is granted the largest funding. The SNSF consists of Foundation Council, National Research Council and Research Commission[11]. Data source: prepared by the Study Fig. 2 Swiss National Science Foundation Organizational Chart (1) Foundation Council The Foundation Council is the supreme body of the SNSF[12], which is primarily responsible for making important decisions, deciding the role to be played by the SNSF in the Swiss research system, and ensuring SNSF’s compliance with the purpose for which it was founded. The Foundation Council consists of the members elected from the representatives from important research institutions, universities and industries in Swiss, as well as the government representatives nominated by the Swiss Federal Council. According to the articles of association of the SNSF[13], each member’s term of office should be 4 years, and the members shall be no more than 50 persons. The Foundation Council also governs the Executive Committee of the Foundation Council consisting of 15 Foundation members. The Committee carries out the mission including selection of National Research Council members and review of the Foundation budget. (2) National Research Council The National Research Council is responsible for reviewing the applications for funding and deciding whether the funding should be granted. It consists of no more than 100 members, mostly researchers in universities and categorized, in four groups by major[14], namely, 1. Humanities and Social Sciences; 2. Math, Natural Science and Engineering; 3. Biology and Medical Science; and 4. National Research Programs (NRPs）and National Centers of Competence in Research (NCCRs). The NRPs and NCCRs are both limited to specific theme-oriented research plans. The funding will continue for 4~5years, amounting to CHF5 million~CHF20 million[15]. The specific theme-oriented research is applicable to non-academic entities, aiming at knowledge and technology transfer, and promotion and application of research results. The four groups evaluate and review the applications and authorize the funding amount. Meanwhile, the representative members from each group form the Presiding Board dedicated to supervising and coordinating the operations of the National Research Council, and advising the Foundation Council about scientific policies, reviewing defined funding policies, funding model and funding plan, and allocating funding by major. (3) Research Commissions Research Commissions are established in various higher education research institutions. They serve as the contact bridge between higher education academic institutions and the SNSF. The research commission of a university is responsible for evaluating the application submitted by any researcher in the university in terms of the school conditions, e.g., the school’s basic research facilities and human resource policies, and providing advice in the process of application. Meanwhile, in order to encourage young scholars to attend research activities, the research committee may grant scholarships to PhD students and post-doctor research[16]. ~to be continued~ [1] SWISS FEDERAL STATISTICS OFFICE, Switzerland's population 2011 (2012), http://www.bfs.admin.ch/bfs/portal/en/index/news/publikationen.Document.163772.pdf (last visited Jun. 1, 2013). [2] WORLD ECONOMIC FORUM [WEF], The Global Competiveness Report 2012-2013 (2012), http://www3.weforum.org/docs/WEF_GlobalCompetitivenessReport_2012-13.pdf (last visited Jun. 1, 2013); WEF, The Global Competiveness Report 2011-2012 (2011), http://www3.weforum.org/docs/WEF_GCR_Report_2011-12.pdf (last visited Jun. 1, 2013); WEF, The Global Competiveness Report 2010-2011 (2010), http://www3.weforum.org/docs/WEF_GlobalCompetitivenessReport_2010-11.pdf (last visited Jun. 1, 2013); WEF, The Global Competiveness Report 2009-2010 (2009),. http://www3.weforum.org/docs/WEF_GlobalCompetitivenessReport_2009-10.pdf (last visited Jun. 1, 2013). [3] INSEAD, The Global Innovation Index 2012 Report (2012), http://www.globalinnovationindex.org/gii/GII%202012%20Report.pdf (last visited Jun. 1, 2013); INSEAD, The Global Innovation Index 2011 Report (2011), http://www.wipo.int/freepublications/en/economics/gii/gii_2011.pdf (last visited Jun. 1, 2013). [4] SR 101 Art. 64: “Der Bund fördert die wissenschaftliche Forschung und die Innovation.” [5] Forschungs- und Innovationsförderungsgesetz, vom 7. Oktober 1983 (Stand am 1. Januar 2013). For the full text, please see www.admin.ch/ch/d/sr/4/420.1.de.pdf (last visited Jun. 3, 2013). [6] Id. [7] Id. [8] CTI, CTI Multi-year Program 2013-2016 7(2012), available at http://www.kti.admin.ch/?lang=en&download=NHzLpZeg7t,lnp6I0NTU042l2Z6ln1ad1IZn4Z2qZpnO2Yuq2Z6gpJCDeYR,hGym162epYbg2c_JjKbNoKSn6A-- (last visited Jun. 3, 2013). [9] Supra note 5. [10] Swiss National Science Foundation, http://www.snf.ch/E/about-us/organisation/Pages/default.aspx (last visited Jun. 3, 2013). [11] Id. [12] Foundation Council, Swiss National Science Foundation, http://www.snf.ch/E/about-us/organisation/Pages/foundationcouncil.aspx (last visited Jun. 3, 2013). [13] See Statutes of Swiss National Science Foundation Art.8 & Art. 9, available at http://www.snf.ch/SiteCollectionDocuments/statuten_08_e.pdf (last visited Jun. 3, 2013). [14] National Research Council, Swiss National Science Foundation, http://www.snf.ch/E/about-us/organisation/researchcouncil/Pages/default.aspx (last visted Jun.3, 2013). [15] Theres Paulsen, VISION RD4SD Country Case Study Switzerland (2011), http://www.visionrd4sd.eu/documents/doc_download/109-case-study-switzerland (last visited Jun.6, 2013). [16] Research Commissions, Swiss National Science Foundation, http://www.snf.ch/E/about-us/organisation/Pages/researchcommissions.aspx (last visted Jun. 6, 2013).
Executive Yuan’s call to action:“Industrial Upgrading and Transformation Action Plan”I.Introduction Having sustained the negative repercussions following the global financial crisis of 2008, Taiwan’s average economic growth rate decreased from 4.4 percent (during 2000-2007 years) to 3 percent (2008-2012). This phenomenon highlighted the intrinsic problems the Taiwanese economic growth paradigm was facing, seen from the perspective of its development momentum and industrial framework: sluggish growth of the manufacturing industries and the weakening productivity of the service sector. Moreover, the bleak investment climate of the post-2008 era discouraged domestic investors injecting capital into the local economy, rendering a prolonged negative investment growth rate. To further exacerbation, the European Debt Crisis of 2011 – 2012 has impacted to such detriment of private investors and enterprises, that confidence and willingness to invest in the private sector were utterly disfavored. It can be observed that as Taiwan’s industrial core strength is largely concentrated within the the manufacturing sector, the service sector, on the other hand, dwindles. Similarly, the country’s manufacturing efforts have been largely centered upon the Information & Communications Technology (ICT) industry, where the norm of production has been the fulfillment of international orders in components manufacturing and Original Equipment Manufacturing (OEM). Additionally, the raising-up of society’s ecological awareness has further halted the development of the upstream petrochemical and metal industry. Consumer goods manufacturing growth impetus too has been stagnated. Against the backdrop of the aforementioned factors at play as well as the competitive pressure exerted on Taiwan by force of the rapid global and regional economic integration developments, plans to upgrade and transform the existing industrial framework, consequently, arises out as an necessary course of action by the state. Accordingly, Taiwan’s Executive Yuan approved and launched the “Industrial Upgrading and Transformation Action Plan”, on the 13th of October 2014, aiming to reform traditional industries, reinforcing core manufacturing capacities and fostering innovative enterprises, through the implementation of four principal strategies: Upgrading of Product Grade and Value, Establishment of Complete Supply Chain, Setting-up of System Integration Solutions Capability, Acceleration of Growth in the Innovative Sector. II.Current challenges confronting Taiwanese industries 1.Effective apportionment of industrial development funds Despite that Research and Development (R&D) funds takes up 3.02% of Taiwan’s national GDP, there has been a decrease of the country’s investment in industrial and technology research. Currently Taiwan’s research efforts have been directed mostly into manufacturing process improvement, as well as into the high-tech sector, however, traditional and service industries on the other hand are lacking in investments. If research funds for the last decade could be more efficiently distributed, enterprises would be equally encouraged to likewise invest in innovation research. However, it should be noted that Taiwan’s Small and Medium Enterprises (SME) based on their traditional developmental models, do not place research as their top priority. Unlike practices in countries such as Germany and Korea, the research fund input by private enterprises into academic and research institutions is still a relatively unfamiliar exercise in Taiwan. With regards to investment focus, the over-concentration in ICTs should be redirected to accommodate growth possibilities for other industries as well. It has been observed that research investments in the pharmaceutical and electric equipment manufacturing sector has increased, yet in order to not fall into the race-to-the-bottom trap for lowest of costs, enterprises should be continually encouraged to develop high-quality and innovative products and services that would stand out. 2.Human talent and labor force issues Taiwan’s labor force, age 15 to 64, will have reached its peak in 2015, after which will slowly decline. It has been estimated that in 2011 the working population would amount to a meager 55.8%. If by mathematical deduction, based on an annual growth rate of 3%, 4% and 5%, in the year 2020 the labor scarcity would increase from 379,000, 580,000 to 780,000 accordingly. Therefore, it is crucial that productivity must increase, otherwise labor shortage of the future will inevitably stagnate economic growth. Notwithstanding that Taiwan’s demographical changes have lead to a decrease in labor force; the unfavorable working conditions so far has induced skilled professionals to seek employment abroad. The aging society along with decrease in birth rates has further exacerbated the existing cul-de-sac in securing a robust workforce. In 1995 the employment rate under the age of 34 was 46.35%, yet in 2010 it dropped to a daunting 37.6%. 3.Proportional land-use and environmental concerns Taiwan’s Environmental Impact Assessment (EIA) is a time-consuming and often unpredictable process that has substantially deterred investor’s confidence. Additionally, there exists a disproportionate use of land resources in Taiwan, given that demand for its use predominantly stems from the northern and middle region of the country. Should the government choose to balance out the utilization of land resources across Taiwan through labor and tax policies, the situation may be corrected accordingly. III.Industrial Upgrading and Transformation Strategies The current action plan commences its implementation from October 2014 to end of December 2024. The expected industrial development outcomes are as follows: (1) Total output value of the manufacturing sector starting from 2013 at NTD 13.93 trillion is expected to grow in 2020 to NTD 19.46 trillion. (2) Total GDP of the service sector, starting at 3.03 trillion from 2011 is expected to grow in 2020 to 4.75 trillion NTD. 1.Strategy No.1 : Upgrading of product grade and value Given that Taiwan’s manufacturing industry’s rate for added value has been declining year after year, the industry should strive to evolve itself to be more qualitative and value-added oriented, starting from the development of high-end products, including accordingly high-value research efforts in harnessing essential technologies, in the metallic materials, screws and nuts manufacturing sector, aviation, petrochemical, textile and food industries etc. (1) Furtherance of quality research Through the employment of Technology Development Program (TDP) Organizations, Industrial TDP and Academic TDP, theme-based and pro-active Research and Development programs, along with other related secondary assistance measures, the industrial research capability will be expanded. The key is in targeting research in high-end products so that critical technology can be reaped as a result. (2) Facilitating the formation of research alliances with upper-, mid- and downstream enterprises Through the formation of research and development alliances, the localization of material and equipment supply is secured; hence resulting in national autonomy in production capacity. Furthermore, supply chain between industrial component makers and end-product manufacturers are to be conjoined and maintained. National enterprises too are to be pushed forth towards industrial research development, materializing the technical evolution of mid- and downstream industries. (3) Integrative development assistance in Testing and Certification The government will support integrative development in testing and certification, in an effort to boost national competitive advantage thorough benefitting from industrial clusters as well as strengthening value-added logistics services, including collaboration in related value-added services. (4) Establishment of international logistics centre Projection of high-value product and industrial cluster image, through the establishment of an international logistics centre. 2.Strategy No.2 : Establishment of a Complete Supply Chain The establishing a robust and comprehensive supply chain is has at its aim transforming national production capabilities to be sovereign and self-sustaining, without having to resort to intervention of foreign corporations. This is attained through the securing of key materials, components and equipments manufacturing capabilities. This strategy finds its application in the field of machine tool controllers, flat panel display materials, semiconductor devices (3D1C), high-end applications processor AP, solar cell materials, special alloys for the aviation industry, panel equipment, electric vehicle motors, power batteries, bicycle electronic speed controller (ESC), electrical silicon steel, robotics, etc. The main measures listed are as follows: (1) Review of industry gaps After comprehensive review of existing technology gaps depicted by industry, research and academic institutions, government, strategies are to be devised, so that foreign technology can be introduced, such as by way of cooperative ventures, in order to promote domestic autonomous development models. (2) Coordination of Research and Development unions – building-up of autonomous supply chain. Integrating mid- and downstream research and development unions in order to set up a uniform standard in equipment, components and materials in its functional specifications. (3) Application-theme-based research programs Through the release of public notice, industries are invited to submit research proposals focusing on specific areas, so that businesses are aided in developing their own research capabilities in core technologies and products. (4) Promotion of cross-industry cooperation to expand fields of mutual application Continuously expanding field of technical application and facilitating cross-industry cooperation; Taking advantage of international platform to induce cross-border technical collaboration. 3.Strategy No.3 : Setting-up of System Integration Solutions capability Expanding turnkey-factory and turnkey-project system integration capabilities, in order to increase and stimulate export growth; Combination of smart automation systems to strengthen hardware and software integration, hence, boosting system integration solution capacity, allowing stand-alone machinery to evolve into a total solution plant, thus creating additional fields of application and services, effectively expanding the value-chain. These type of transitions are to be seen in the following areas: turnkey-factory and turnkey-project exports, intelligent automated manufacturing, cloud industry, lifestyle (key example: U-Bike in Taipei City) industry, solar factory, wood-working machinery, machine tools, food/paper mills, rubber and plastic machines sector. Specific implementation measure s includes: (1) Listing of national export capability – using domestic market as test bed for future global business opportunities Overall listing of all national system integration capabilities and gaps and further assistance in building domestic “test beds” for system integration projects, so that in the future system-integration solutions can be exported abroad, especially to the emerging economies (including ASEAN, Mainland China) where business opportunities should be fully explored. The current action plan should simultaneously assist these national enterprises in their marketing efforts. (2) Formation of System Integration business alliances and Strengthening of export capability through creation of flagship team Formation of system integration business alliances, through the use of national equipment and technology, with an aim to comply with global market’s needs. Promotion of export of turnkey-factory and turnkey-projects, in order to make an entrance to the global high-value system integration market. Bolstering of international exchanges, allowing European and Asian banking experts assist Taiwanese enterprises in enhancing bids efforts. (3) Establishing of financial assistance schemes to help national enterprises in their overseas bidding efforts Cooperation with financial institutes creating financial support schemes in syndicated loans for overseas bidding, in order to assist national businesses in exporting their turnkey-factories and turnkey-solutions abroad. 4. Strategy No.4 : Acceleration of growth in the innovative sectors Given Taiwan economy’s over-dependence on the growth of the electronics industry, a new mainstream industry replacement should be developed. Moreover, the blur distinction between the manufacturing, service and other industries, presses Taiwan to develop cross-fields of application markets, so that the market opportunities of the future can be fully explored. Examples of these markets include: Smart Campus, Intelligent Transportation System, Smart Health, Smart City, B4G/5G Communications, Strategic Service Industries, Next-Generation Semiconductors, Next-Generation Visual Display, 3D Printing, New Drugs and Medical Instruments, Smart Entertainment, Lifestyle industry (for instance the combination of plan factory and leisure tourism), offshore wind power plant, digital content (including digital learning), deep sea water. Concrete measures include: (1) Promotion of cooperation between enterprises and research institutions to increase efficiency in the functioning of the national innovation process Fostering of Industry-academic cooperation, combining pioneering academic research results with efficient production capability; Cultivation of key technology, accumulation of core intellectual property, strengthening integration of industrial technology and its market application, as well as, establishment of circulation integration platform and operational model for intellectual property. (2) Creating the ideal Ecosystem for innovation industries Strategic planning of demo site, constructing an ideal habitat for the flourishing of innovation industries, as well as the inland solution capability. Promotion of international-level testing environment, helping domestic industries to be integrated with overseas markets and urging the development of new business models through open competition. Encouraging international cooperation efforts, connecting domestic technological innovation capacities with industries abroad. (3) Integration of Cross-Branch Advisory Resources and Deregulation to further support Industrial Development Cross-administrations consultations further deregulation to support an ideal industrial development environment and overcoming traditional cross-branch developmental limitations in an effort to develop innovation industries. IV. Conclusion Taiwan is currently at a pivotal stage in upgrading its industry, the role of the government will be clearly evidenced by its efforts in promoting cross-branch/cross-fields cooperation, establishing a industrial-academic cooperation platform. Simultaneously, the implementation of land, human resources, fiscal, financial and environmental policies will be adopted to further improve the investment ambient, so that Taiwan’s businesses, research institutions and the government could all come together, endeavoring to help Taiwan breakthrough its currently economic impasse through a thorough industrial upgrading. Moreover, it can be argued that the real essence of the present action plan lies in the urge to transform Taiwan’s traditional industries into incubation centers for innovative products and services. With the rapid evolution of ICTs, accelerating development and popular use of Big Data and the Internet of Things, traditional industries can no longer afford to overlook its relation with these technologies and the emerging industries that are backed by them. It is only through the close and intimate interconnection between these two industries that Taiwan’s economy would eventually get the opportunity to discard its outdated growth model based on “quantity” and “cost”. It is believed that the aforementioned interaction is an imperative that would allow Taiwanese industries to redefine its own value amidst fierce global market competition. The principal efforts by the Taiwanese government are in nurturing such a dialogue to occur with the necessary platform, as well as financial and human resources. An illustration of the aforementioned vision can be seen from the “Industrie 4.0” project lead by Germany – the development of intelligent manufacturing, through close government, business and academic cooperation, combining the internet of things development, creating promising business opportunities of the Smart Manufacturing and Services market. This is the direction that Taiwan should be leading itself too. References 1.Executive Yuan, Republic of China http://www.ey.gov.tw/en/（last visited: 2015.02.06） 2.Industrial Development Bureau, Ministry of Economic Affairs http://www.moeaidb.gov.tw/（last visited: 2015.02.06） 3.Industrial Upgrading and Transformation Action Plan http://www.moeaidb.gov.tw/external/ctlr?PRO=filepath.DownloadFile&f=policy&t=f&id=4024（last visited: 2015.02.06）
The Study of Estonian Human Genes DatabaseI. Introduction The human genes database or human genome project, the product under the policy of biotechnology no matter in a developed or developing country, has been paid more attention by a government and an ordinary people gradually. The construction of human genes database or human genome project, which is not only related to a country’s innovation on biotechnology, but also concerns the promotion of a country’s medical quality, the construction of medical care system, and the advantages brought by the usage of bio-information stored in human genes database or from human genome project. However, even though every country has a high interest in setting up human genes database or performing human genome project, the issues concerning the purposes of related biotechnology policies, the distribution of advantages and risks and the management of bio-information, since each country has different recognition upon human genes database or human genome project and has varied standards of protecting human basic rights, there would be a totally difference upon planning biotechnology policies or forming the related systems. Right now, the countries that vigorously discuss human genes database or practice human genome project include England, Iceland, Norway, Sweden, Latvia and Estonia. Estonia, which is the country around the Baltic Sea, has planned to set up its own human genes database in order to draw attention from other advanced countries, to attract intelligent international researchers or research groups, and to be in the lead in the area of biotechnology. To sum up, the purpose of constructing Estonian human genes database was to collect the genes and health information of nearly 70% Estonia’s population and to encourage bio-research and promote medical quality. II. The Origin of Estonian Human Genes Database The construction of Estonian human genes database started from Estonian Genome Project (EGP). This project was advocated by the professor of biotechnology Andres Metspalu at Tartu University in Estonia, and he proposed the idea of setting up Estonian human genes database in 1999. The purposes of EGP not only tried to make the economy of Estonia shift from low-cost manufacturing and heavy industry to an advanced technological economy, but also attempted to draw other countries’ attention and to increase the opportunity of making international bio-researches, and then promoted the development of biotechnology and assisted in building the system of medical care in Estonia. EGP started from the agreement made between Estonian government and Eesti Geenikeskus (Estonian Genome Foundation) in March, 1999. Estonian Genome Foundation was a non-profit organization formed by Estonian scientists, doctors and politicians, and its original purposes were to support genes researches, assist in proceeding any project of biotechnology and to set up EGP. The original goals of constructing EGP were “(a) reaching a new level in health care, reduction of costs, and more effective health care, (b) improving knowledge of individuals, genotype-based risk assessment and preventive medicine, and helping the next generation, (c) increasing competitiveness of Estonia – developing infrastructure, investments into high-technology, well-paid jobs, and science intensive products and services, (d) [constructing] better management of health databases (phenotype/genotype database), (e) … [supporting]… economic development through improving gene technology that opens cooperation possibilities and creates synergy between different fields (e.g., gene technology, IT, agriculture, health care)”1. III. The Way of Constructing Estonian Human Genes Database In order to ensure that Estonian human genes database could be operated properly and reasonably in the perspectives of law, ethics and society in Estonia, the Estonian parliament followed the step of Iceland to enact “Human Genes Research Act” (HGRA) via a special legislative process to regulate its human genes database in 2000. HGRA not only authorizes the chief processor to manage Estonian human genes database, but also regulates the issues with regard to the procedure of donation, the maintenance and building of human genes database, the organization of making researches, the confidential identity of donator or patient, the discrimination of genes, and so on. Since the construction of Estonian human genes database might bring the conflicts of different points of view upon the database in Estonia, in order to “avoid fragmentation of societal solidarity and ensure public acceptability and respectability”2 , HGRA adopted international standards regulating a genes research to be a norm of maintaining and building the database. Those standards include UNESCO Universal Declaration on the Human Genome and Human Rights (1997) and the Council of Europe’s Convention on Human Rights and Biomedicine (1997). The purpose of enacting HGRA is mainly to encourage and promote genes researches in Estonia via building Estonian human genes database. By means of utilizing the bio-information stored in the database, it can generate “more exact and efficient drug development, new diagnostic tests, improved individualized treatment and determination of risks of the development of a disease in the future”3 . In order to achieve the above objectives, HGRA primarily puts emphasis on several aspects. Those aspects include providing stronger protection on confidential identity of donators or patients, caring for their privacy, ensuring their autonomy to make donations, and avoiding any possibility that discrimination may happen because of the disclosure of donators’ or patients’ genes information. 1.HERBERT GOTTWEIS & ALAN PETERSEN, BIOBANKS – GOVERNANCE IN COMPARATIVE PERSPECTIVE 59 (2008). 2.Andres Rannamae, Populations and Genetics – Legal and Socio-Ethical Perspectives, in Estonian Genome Porject – Large Scale Health Status Description and DNA Collection 18, 21 (Bartha Maria Knoppers et al. eds., 2003. 3.REMIGIUS N. NWABUEZE, BIOTECHNOLOGY AND THE CHALLENGE OF PROPERTY – PROPERTY RIGHTS IN DEAD BODIES, BODY PARTS, AND GENETIC INFORMATION, 163 (2007).
Executive Yuan roll-out The Policy of “The Free Economic Pilot Zones”Executive Yuan roll-out The Policy of “The Free Economic Pilot Zones”1.Executive Yuan approved a Bill titled “The Free Economic Pilot Zones Special Act”The “Free Economic Demonstration Zones” (hereinafter as FEDZs) is a critical part to improve the liberalization and internationalization of the economy of Republic of China (R.O.C). By deregulation, FEDZs was conceived as trial zones. Once the results of the program were promising, it would be expanded to the entire country. In order to engage in the regional economic and trade integration, the Executive Yuan approved a Bill titled “The Free Economic Pilot Zones Special Act” (hereinafter as Bill) on April 26th, 2013.On Mar 6th, 2014, the Joint Economic, Internal Administration , and Finance Committee of the Legislation Yuan (the Congress) discussed the Bill for reports and questions. By the end of the March, 2014, the Congress will hold five public hearings. Not until the discussion of the Bill item by item and the passage in the Congress, the second stage of the FEDZ program would not be initiated. There are five main points, including the treatments on foreigners and people from mainland China, tax incentives for Taiwanese businessman, foreign professionals and foreign companies, regulations on untaxed goods and labor, regulations on industrial development, such as the agriculture and the medical, and certain new items on education and professional services.For the reason that the government considered the need of human resources to sustain the operation of the industries, the Executive Yuan is trying to promote innovative education in FEPZs. Since the education requirements for both of public and private universities are unified in local, colleges and universities were restrained and missed some great opportunities to discover their own niches in education. Hence, innovative education in FEPZs is trying to help higher education system to introduce foreign education resources and foresight concepts, and to attract more international students. The innovative educational projects within FEPZs will also facilitate the cooperations among domestic and foreign universities, and set up experimental branch campuses, colleges, degree programs or professional courses. Besides, the financial service sector is also included. Since FEDZs is an important pusher for R.O.C to move forward in regional economic integration, accordingly, the most significant liberate item for the financial industry in the FEPZs is to allow offshore banking units and offshore security units to provide financial products and service (e.g. OSU and OBU). Meanwhile, the financial industry is predicted to receive an NTD$140 billion or more in revenues over the next five year.In summary, FEPZs is regarded as a engine propelling liberalization and internationalization. To gain the international competitiveness, the government will continue to promote policies and measures. By establishing the free economic demonstration zone, it is expected to create innovative effects into the education system and to create more job opportunities.2.Legislation Yuan has reviewd “The Free Ecomonic Pilot Zones Special Act”The Republic of China (R.O.C) have been carried out “free economic” recent years, by promoting “Free Economic Pilot Zone” (hereinafter as FEPZs) to encourage every industrial and foreign investment. Besides, FEPZs will not only keep talents and technologies in R.O.C but also liberalize and internationalize our economic.The Executive Yuan had approved a Bill titled “The Free Economic Pilot Zones Special Act” (hereinafter as the Bill) on Dec. 26th, 2013. At the end of May, the Joint Economic, Internal Administration, and Finance Committee of the Legislation Yuan (the Congress) have taken five public hearings for the Bill, and amended the Bill according to the advices proposed by specialists. Not until the deliberation of the Bill item by item and its passage in the Congress, the second stage of the FEDZ program would not be initiated. There are five main points, including the treatments on foreigners, tax incentives for R.O.C businessman, foreign professionals and foreign companies, regulations on untaxed goods and labor, regulations on industrial development, such as the agriculture and the medical service, and certain new items on education and professional services.The government considers that there have to be enough human resource to sustain the opened industries, so Executive Yuan is trying to promote innovative education in FEPZs. The core concept of FEPZs is foresight, liberalization and internationalization, the premier said, and the higher education systems belong to high-end service and have much more marketability and variability compared to other education systems. Through innovative and efficient way to manage the school could let University being much more liberalized. Furthermore, the higher education systems in R.O.C. have to connect with international education to avoid being marginalized. Our first stage of education innovation will promote to set up “degree programs” and “professional courses”. The first phase for the Ministry of Education is going to found “degree programs” or “professional courses” through collaboration way. The Ministry of Education will also draw up related regulations or guidance on standards for school cooperation, co-regulation, setup conditions, supervision, enrolling new student, and recruiting staff.? Once the Bills pass, The Ministry of Education plans to establish “branch school” and “independence campus” helping R.O.C. higher education goes internationalized.On the other hand, Our medical service also has strong international competitiveness. R.O.C is engage in developing international medical and health industry. The premier said, the Ministry of Health and Welfare have proposed some measures, such as limitation to the number of medical centre, medical personnel working hours, and NHI is not allow to use in the zones.The premier added, on the extemporaneous sittings, “The Free Economic Pilot Zones Special Act” will be the priority bills and be deliberated in the end of June By establishing the free economic demonstration zone, it is expected to propel R.O.C take part in Trans-Pacific Partnership (TPP) and the Regional Comprehensive Economic Partnership (RCEP).3.Executive Yuan’s rapid roll-out of “The Free Economic Pilot Zones”, and has published a report concerning the legal and economic implications of its the BillThe “Free Economic Pilot Zones” (hereinafter as FEPZs) plays a pivotal role in promoting market liberalization, especially at an international level. Premier of the Executive Yuan, Mr. Jiang Yi-Hua has stated that the “market economy” and “innovation economy” allows for tremendous economic prosperity to be embraced by the Republic of China (hereinafter as R.O.C). The seizing of such opportunity has been the goal of government efforts, which can be attested by the recent proposal of the “The Free Economic Pilot Zones Special Act” (hereinafter as the Bill), currently undergoing review and consultation proceedings. The Premier further stressed that the national economy should not be left excluded from international commerce, on the other hand, it is imperative that closer economic bonds with other nations are forged, therefore allowing itself open up to wider scope of opportunities for growth. The key in rendering this possible is through the enactment of laws. At a time, when Trans-Pacific nations, including the United States of America, Japan and countries from Southeast Asia, are working towards regional economic cooperation, if R.O.C. is to be left out, it is feared that its position in the global market would further be marginalized.The core innovative strengths of the FEPZs include “Smart Logistics”, “International healthcare services”, “Value added agriculture”, “Financial Services”, “Education Innovation”, all of which are implemented by employing R.O.C.’s finest workforce, knowledge, information and communications technology (ICT), geographical position and cross-strait relationship advantages, leading way for an advantageous basis for pioneering economic development. The first stage of development will be based on 6 locations proximal to the sea (including Keelung Port, Taipei Port, Kaohsiung Port, Suao Harbor, Anping Port, Taichung Port) and Taoyuan Aerotropolis and Pingtung Agricultural Biotech Park. The second stage of development would only commence after the Bill have been approved by the legislative Yuan, which would attract much capital investment, hence boosting high employment rates. Presently, besides the aforementioned regions opened up for the FEPZs, other cities and industrial sites (including those from offshore islands), are striving to gain membership of the FEPZs, or applying for empirical research of the FEPZs.The Executive Yuan has published a report concerning the legal and economic implications of its the Bill on May 2014. The report largely consists of assessments made by varying governing bodies, such as Ministry of Home Affairs, Financial Supervisory Commission etc., on the implications of the draft concerning real estate, employment, fiscal income, logistics, conditions for medical care, agriculture, higher education, social environment and social wealth redistribution etc.Furthermore, international attention has been closely centered on the progress of FEPZs. During the “The third review of the trade policies and practices of Chinese Taipei” after R.O.C accession to the World Trade Organization (WTO) held on the 17th of September 2014 in Geneva, each member state has demonstrated expectations arising out of the direction and planning undertaken for the FEPZs. National economic and international commercial reforms are under way and have seen much progress in further promoting the overall strength of the economic system, in an effort to respond to the rapid global political and economic developments, for example, through the signing of Economic Cooperation Framework Agreement (ECFA), and the implementation of FEPZs policies. In the future, it will be expected that R.O.C. will strive for a more integral international commercial system, allowing much capital investment inflows as well as the cultivating of high-caliber human resources.To promote more liberal and internationalized development of Taiwan economy, government of Republic of China (R.O.C) approved the “Free Economic Pilot Zone (FEPZ) Plan,” which the Bill is currently censored in Legislation Yuan and the measures would be implemented in two phases. The first phase of FEPZs would be initiated within six free trade ports, Taoyuan airport free trade zone, and Pingtung Agricultural Biotechnology Park; other industries that match up with the idea of liberalization, internationalization and foresight can all be incorporated into FEPZ through continuing examination under Execution Yuan. After this special legislation is passed, the set-ups of demonstration zones can be applied by authorities either of central or of local government and the related promotion works of the second phase will be unfolded immediately.Heading to the target of becoming Kin-Xiao (Kinmen and Xiaomen) Free Trade Zone, Kinmen government planned to apply to be one of the FEPZs and thus cooperated with Taiwan Institute of Economic Research (TIER) on December 11, for a commissioned research (which was later released on the conference of accelerating Kin-Xia FTZ on December 19) on evaluating if Kinmen is qualified for an application of FEPZs. Kinmen’s critical location and the featured industries have composed a perfect environment complying with the ideas such as value-added agriculture, international healthcare and innovative education for FEPZ. For instance, the white liquor industry in Kinmen represents the international management and promotion of agricultural products, and is the best example for value-added agriculture. “Long-term Healthcare Village in Kinmen,” which is currently developing in Kinmen, would also be a drive for international healthcare industry. Based on the Taiwan-featured culture, “International Education City” could be developed with a liberal and innovative atmosphere, which would attract famous schools in world to set up their branch school in Kinmen. Above all, Kinmen County vice Mayor, Wu Yo-Chin, indicated that Kinmen would be the first choice for FEPZ and would hold the key to open a new gate for the Cross-Strait. The vice Mayor emphasized that Kinmen government has well budgeting and financial management, which needn’t the extra aids from central government, yet Kinmen was excluded in the first phase of FEPZs. Although Kinmen would apply to be a FEPZ in the second phase after the special legislation passed, Kinmen still strived for taking part in the first phase of FEPZs due to the uncertain schedule for implementation of regulations on FEPZs.National Development Council (NDC), however, gave an opinion on issue of Kinmen applying to be in the first phase of FEPZs, which declared again the original plan for the first phase only included six free trade ports, Taoyuan airport free trade zone, and Pingtung Agricultural Biotechnology Park. NDC also suggested Kinmen could still follow after the first phase and apply to be a FEPZ in the second phase.
- Impact of Government Organizational Reform to Scientific Research Legal System and Response Thereto (1) – For Example, The Finnish Innovation Fund (“SITRA”)
- The Demand of Intellectual Property Management for Taiwanese Enterprises
- Blockchain in Intellectual Property Protection
- Impact of Government Organizational Reform to Research Legal System and Response Thereto (2) – Observation of the Swiss Research Innovation System
- Recent Federal Decisions and Emerging Trends in U.S. Defend Trade Secrets Act Litigation
- The effective and innovative way to use the spectrum: focus on the development of the "interleaved/white space"
- Copyright Ownership for Outputs by Artificial Intelligence
- Impact of Government Organizational Reform to Research Legal System and Response Thereto (2) – Observation of the Swiss Research Innovation System