Introduction to Tax Incentive Regime for SMEs
Introduction to Tax Incentive Regime for SMEs
I. Introduction
The developments of SMEs (small-and-medium enterprises) plays an important pillar of development of industries and creation of jobs in Taiwan. In 2017, the total number of SMEs in Taiwan was 1,437,616. They offer 8,904,000 jobs, accounting for 78.44% of the workforce[1]. However, SMEs have difficulties in entering international supply chains because of their weakness in finance. Therefore, how to enhance the global competitiveness of SMEs is an important issue for the concerned authority. Chapter 4 of the Act for Development of Small and Medium Enterprises prescribes the tax incentive regime based on the financial capability of SMEs and characteristics of industries in order to facilitate the development of SMEs, especially the globalization of SMEs. This paper will review the importance of tax incentives to SMEs and introduces the tax incentive regime under the Act for Development of Small and Medium Enterprises In order to help SMES have an understanding of such regime.
II. SME Tax Incentives Scheme
As the gatekeeper of the market, the government may intervene the market with various policies or tools to reallocate and improve the soundness of the market environment when the market competitions is impaired due to information asymmetry or externalities. At this juncture, preferential tax rates or tax deductions can be offered to specific taxpayers through legal institution. This allows these taxpayers to retain higher post-tax earnings so that they are incentified to invest more resources in the legally defined economic activities. Tax incentives targeting at risky or spillover investments to create benefits to specific economic activities will help the development of industries and markets.
Whilst Article 10 of the Statute for Industrial Innovation has provided tax cuts for R&D expenditures, these incentives are not focus on SMEs and hence not supportive to their research and innovations. This was the reason for the 2016 amendment of the Act for Development of Small and Medium Enterprises added Article 35 to offer tax incentives in order to encourage R&D and innovative efforts and Article 35-1 to activate intellectual properties via licensing. These articles aim to accelerate the momentum of innovations and transformations which promoting investments for SMEs. OthersTo assist SMEs to cope with change of the business environment, the Article 36-2 added the tax incentives for salary or headcount increases, to contribute to the sustainability of SMEs and stabilize the labour market and industrial structures. Following is an explanation of the applicability of these schemes and the requirements to qualify such incentives.
III. Tax Incentives to Promote Investments
(I) Tax deductions for R&D expenditures
Governments around the world seek to encourage corporate R&D activities, that Tax incentives are put in place to reduce R&D costs and foster a healthy environment of investment for more R&D initiatives. Neighboring countries such as Japan, Korea and Singapore are frequently practicing belowing tax burdens to encourage R&D efforts. Article 35 of the Act for Development of Small and Medium Enterprises in Taiwan allows accelerated depreciation and offers tax cuts[2] to stimulate R&D and innovations and create an investment friendly environment for SMEs.
1. Taxpaying Entities and Requirements
(1) Qualifications for SMEs
Article 35 of the Act is applicable to qualified SMEs and individual taxpayers, which are (1) from manufacturing, construction & engineering, mining and quarrying industries, with paid-in capital below or equal to NT$80 million or with the number of full-time employees less than 200 people; (2) from other industries with the sales of the previous year below or equal to NT$100 million or with the number of full-time employees less than 100 people. Thus, the qualifications of Small and Medium Enterprises are based on either paid-in capital/sales or number of employees under the Act[3].Meanwhile, SMEs may not have an independent R&D department due to the limit of size or operating cost.Therefore, if the taxpayers hiring full-time R&D personnel that can provide records of job descriptions and work logs to R&D activities, the SMEs can access the tax incentives provided that the R&D functions. The recognized by government agencies is increasingly flexibility for SMEs seeking policy support.
2. Taxpayers and requirements
(1) A certain degree of innovativeness
As the tax incentive regime strives to promote innovations, the R&D expenses should be used to fund innovative developments. According to the official letters from the Small and Medium Enterprise Administration, Ministry of Economic Affairs, there is no high bar as forward-looking, risky and innovative as usually” required for other incentives previously, which is considering the size of SMEs and their industry characteristics. The “certain degree” of innovativeness shall be based on industry environments and SME businesses as determined by competent authorities in a flexible manner.
(2) Flexibility in the utilization of business income tax reductions
To encourage regular R&D activities, The case that SMEs may not have R&D undertakings each year due to funding constraints, or start-up company may have incurred R&D expenditures but are not yet profitable and hence have no tax liabilities during the year, Corporate taxpayers were able to choose beside deduct the payable taxes during a single year, and reduce the payable taxes during the current year over three years starting from the year when tax incentives are applicable.
3. Tax incentive effects
As previously mentioned, Article 35 of the Act for Development of Small and Medium Enterprises accommodates the characteristics of SMEs by allowing reductions of corporate business taxes for up to 15% R&D expenditures during the current year, or spreading the tax reductions by spreading up to 10% of the R&D expenditures over three years from the first year when the incentives are applicable. It is worth noting that the tax deductions shall not exceed 30% of the payable business income taxes during a single year.
If the instruments and equipment for R&D, experiments or quality inspections have a lifetime over two years or longer, it is possible to accelerate the depreciation within half of the years of service prescribed by the income tax codes for fixed assets. However, the final year less than 12 months over the shortened service years shall not be counted. Accelerated depreciation brings in tax benefits for fixed asset investments during the initial stage, that meets the requirements for new technologies and risk management by frontloading the equipment depreciation and creates a buffer for capital utilization.
(II) Deferred taxations on licensing/capitalization of intellectual properties
The deferral of tax payments under the Act for Development of Small and Medium Enterprises is meant to avoid any adverse effect on the application of technological R&Ds by SMEs. As the equity stakes via capitalization of intellectual properties by inventors or creators are not cashed out yet and the subsequent gains may not be at the same valuation as determined at the time of capitalization, the immediate taxation may hinder the willingness to transfer intellectual properties. Therefore, assisting SMEs to release intellectual properties with potential economic value, the licensing and capitalization of intellectual properties is strongly encouraged. The tax expenses shall be deferred within SME or an individual acquires stakes on a non-publicly-listed company by transferring their intellectual properties.
This is to stimulate the applications and sharing of relevant manufacturing technologies. When an SME or an individual acquires stakes on a non-publicly-listed company by transferring their intellectual properties, their tax expenses shall be deferred.
1. Taxpayers and requirements
(1) Qualifications for individuals or SMEs
Article 35-1 of the Act for Development of Small and Medium Enterprises is applicable to SMEs and individual taxpayers. This is to foster the growth of SMEs and enhancement of industry competitiveness by encouraging R&D and innovations from individuals and start-ups. To promote the commercialize of intellectual properties in different ways, the Act for Development of Small and Medium Enterprises provides income tax incentives to individuals and SMEs transferring intellectual properties. The purpose is to encourage different paths to industry upgrades.
(2) Ownership of intellectual properties
To ensure that the proceeds of intellectual property is linked to the activity of intellectual properties which perform by individuals or SMEs. Only the owners of the intellectual properties capitalized and transferred can enjoy the tax benefits.
Intellectual properties referred to in the Act for Development of Small and Medium Enterprises are the properties with value created with human activities and hence conferred with legal rights. These include but are not limited to copyrights, patent rights, trademarks, trade secrets, integrated circuit layouts, plant variety rights and any other intellectual properties protected by laws[4].
(3) Acquisition of stock options
The abovementioned tax incentives are offered to the individuals or SMEs who transfer intellectual properties to non-listed companies in exchange of their new shares. The income taxes on the owners of intellectual properties are deferred until acquisition of shares. These shares are not registered with the book-entry system yet. Before the transferrers of intellectual properties dispose or offload these shares, immediate taxations will impose economic burdens and funding challenges given the unknown prices of the eventual cash-out. Therefore, this legislation is only applicable to taxpayers who obtain options for new shares.
2. Taxpayers and requirements
(1) Transfer of intellectual properties
According to Article 36 of the Copyright Act as interpreted by official letters issued by the Ministry of Finance, the transfer of intellectual properties is the conferring of intellectual properties to others, and the transferees access these intellectual properties within the scope of the transfer. In terms “transfer” of the first and second paragraphs of Article 36 does not include licensing[5], but such as granting, licensing and inheritance.
(2) Timing of income tax payments
In general, the particular time that calculation of taxes payable is based on when the taxpayers acquire the incomes, less relevant expenses or costs. The taxes payable timing should be depending on when the taxpayers obtain the newly issued shares by transferring intellectual properties. However, the levy of income taxes at the time of intellectual property transfers and new share acquisitions may cause a sudden jump in taxes payable in the progressive system and thus a burden on the economics of SMEs and individuals concerned. Thus, to avoid disruptions to company operations or personal finance planning, Article 36 makes the exception for the incomes earned by subscribing to new shares as a result of transferring intellectual properties. Such incomes are not subject to taxes during the year when the shares are acquired, in order to mitigate the tax barriers concerned.
In sum, the taxes shall be paid when such shares are transferred, gifted or distributed.
3. Tax incentive effects
Article 35-1 of the Act for Development of Small and Medium Enterprises provides tax incentives to stimulate the mobilization of intellectual properties by smoothing out the impact of income taxes payable. This is applicable to (1) SMEs who can postpone the business income taxes payable from the year when they acquire new shares of non-listed companies by transferring the intellectual properties they own; (2) individuals who can postpone the individual income taxes payable from the year when they acquire new shares of non-listed companies by transferring the intellectual properties they own.
IV. Tax incentives aiming to improve the business environment
(I) Tax reductions for wages to additional headcounts
SMEs are vital to the Taiwan, making uo 90% of the companies accounting in Taiwan, who employ more than 6.5 million people or 72.8% of the total workforce. Any economic recession may make it difficult for SMEs to maintain their labor costs given their smaller funding size and external challenges. This will cause higher unemployment rates and hurt the economy, which may cause impairment of the capacity or create a labor gap for SMEs, eventually shrink the industry scale. To lower the burden of operational and investment costs and learn from the legislatives in Japan and the U.S.[6], tax incentives are put in place as a buffer for adverse effects of external environments. The first paragraph of Article 36-2 of the Act for Development of Small and Medium Enterprises provide tax incentives for employee salaries of new headcounts based on the assessment on the economy over a time period. This is intended to encourage domestic investments and avoid the pitfall of direct government subsidies distorting salary structures. It is hoped that investments from SMEs can stimulate the momentum of economic growth.
1. Taxpayers
The tax incentives under Article 36-2 of the Act for Development of Small and Medium Enterprises aim to assist SMEs through difficult times in an economic downturn. The threshold of the period time is based on the unemployment rate has been below the economic indicator predetermined for six consecutive months, which calculated by the Directorate General of Budget, Accounting and Statistics, Executive Yuan. In number of the unemployment rate has been below the economic indicator predetermined for six consecutive months, it is deemed that the business environment is not friendly to SMEs. In this instance, the Regulations for the Tax Preferences Provided to Small and Medium-sized Enterprises on Additional Wage Payment will trigger the tax incentives. The abovementioned economic indicator shall be published by the competent authorities once every two years.
Moreover, to qualify for the tax incentives for new employees, SMEs should investing new ventures or instill new capital by at least $500,000[7] or hiring workforce at least two full-time headcounts compared with the previous fiscal year, that constitute at the Article 36-2 of the Act for Development of Small and Medium Enterprises, which aims to encourage SMEs investments.
2. Taxpayers
(1) Qualifications of additional headcounts
As the dispatched human resource services typically meet temporary or short-term requirements and contractors do not enjoy employment security, this is not consistent with the spirit of the legislation to create jobs and reduce unemployment. Therefore, to avoid the one-time increase of headcounts from accessing the tax reductions during the year and the deterioration of labor relations in Taiwan. Tax incentive is not offered to the additional recruitment of part-time or contracted workers.
Meanwhile, the tax incentives are only applicable to the additional employment of Taiwanese nationals, above or below 24 years old. A tax deduction of 50% based on annual wages is provided for the hiring of people below 24 years old. The extra tax deduction will stimulate young employment.
(2) Definition of additional employment
The number of additional headcounts is based on permanent hires and calculated as the difference between the average number of Taiwanese employees covered by labor insurance per month throughout a single fiscal year or before and after the incremental increase of workforce. The conversion of regular contracts to indefinite employment in writing or signing up for indefinite R&D headcounts under the military service scheme can also be deemed as additional employment. It is worth noting, however, the new headcounts resulted from M&A activities or transfer between affiliated companies are excluded in this legislation.
(3) Calculation of wages
Companies are also required to increase employment as well as the Comparable Wages. The comparable wages are estimated with the summation of 30% of the wages for the year before and after additional employment that based on the aggregate of the new hires comparable wages compared to the prior year. In other words, if the aggregate wages paid out are higher than comparable wages during the year, the companies concerned have indeed incurred higher personnel expenses. Tax incentives are thus granted because it improves the business environment and it is the purpose of this legislation.
3. Tax incentive effects
The first paragraph of Article 36-2 of the Act for Development of Small and Medium Enterprises provides deductions of business income taxes during the year to qualified SMEs at an amount equivalent to 130% of the incremental wages paid to new headcounts who are Taiwanese nationals. The deductible amount is equivalent to 150% of the incremental wages if new headcounts are Taiwanese nationals below 24 years old.
(II) Tax incentives for companies that increase salaries
Companies are subject to the effect of changes in the external factors such as global supply and demand on the international market, as well as the domestic business environment as a result of risk aversion from investors and expectation from customers. These uncertainties associated with investments and the rising prices for consumers will suppress the wage levels in Taiwan. This the reason why the second paragraph of Article 36-2 of the Act for Development of Small and Medium Enterprises grants tax deductions for the companies who increase salaries, to encourage companies share earnings with employees and enhance private-sector consumption. SMEs may deduct their business income taxes payable during the year up to 30% of salary increase for existing entry-level employees who are Taiwanese nationals, not as a result of statutory requirement for basic wage adjustments.
1. Taxpayers
The tax incentives are applicable to SMEs as defined by the Regulations for the Tax Preferences Provided to Small and Medium-sized Enterprises on Additional Wage Payment and based on the same economic indicators previously mentioned.
2. Qualification for tax incentives
(1) Definition of entry-level employees
The object of taxation under this act is the enterprise's average wage payment to the entry-level employees. The entry-level employees referred to in this act are authorized by the "Small and medium-sized enterprise employee salary increase, salary deduction act " that refers to employees of local nationality with an average monthly recurring salary below nt $50,000[8] whose were entered into indefinite employment contracts with SMEs. Through such conditions, the effect of tax concessions will be concentrated on promoting the salary level of grassroots staff and helping enterprises to cope with changes in the industrial environment.
(2) Average salaries
The salaries to entry-level employees refer to the basic salaries, fixed allowances and bonuses paid on a monthly basis. Payment-in-kind shall be discounted based on the actual prices and included into the regular salaries. Meanwhile, regular salaries should be calculated with annualized averages, as this legislation seeks to boost salary levels. The regular salaries to entry-level employees during the year are estimated with the monthly number of entry-level employees during the same year. Only when the average basis salaries during the year are higher than those in the prior year can the tax incentives be applicable.
3. Tax incentive effects
Applying this article, SMEs can deduct their business income taxes each year up to 130% of salary increase for existing entry-level employees who are Taiwanese nationals, which are not as a result of statutory requirement for basic wage adjustments. However, it is not allowed to double count the increased personnel expenses for new headcounts applicable to the first and second paragraphs of the same article.
V. Conclusions
The funding scales and relatively weak financial structures are the factors that led SMEs be susceptible influenced by supply change dynamics and business cycles. To the extent that is suppressing the flexible in capital utilization for SMEs, also influencing on the sustainability of SMEs. Differ from government subsidies require budgeting, reviewing and implementations, there are complications regarding the allocation of administrative resources. Therefore, it is important to plan for tax incentives in order to stimulate R&D, innovation and job creation by SMEs and ultimately make SMEs more competitive.
The tax incentives to SMEs amended in 2016 by the Small and Medium Enterprise Administration are known for the following:
(I) The lowering of thresholds for tax reductions of R&D expenses in order to encourage SMEs to invest in R&D activities with a “certain degree” of innovativeness and enhance the momentum for SMEs to upgrade and transform themselves;
(II) Deferral the income taxations on the transfer of intellectual properties for equity, in order to encourage application and utilization of such intellectual properties, provide incentives for R&D programs or innovations by individuals and SMEs. This also creates a catalyst for industry upgrade;
(III) Tax deductions for the employment of new headcounts or the increase of employee wages during the time the economic indicators have reached a certain threshold and based on the health of the investment environment. This is to encourage company investments and capital increases in Taiwan and mitigate the volatility of economic cycles, in order to get ready for business improvement.
The above tax incentive programs, i.e. tax deductions for R&D and innovations; deferral of taxations on the transfer of intellectual properties for equity; tax deductions for the hiring of new headcounts and the increase of employee salaries, are meant to boost the investment from SMEs and the competitiveness of SMEs. The Act for Development of Small and Medium Enterprises seeks to reduce tax burdens of SMEs actively investing for their future and competitive advantages. Tax incentives help to mitigate the adverse effect of the economy on the business environment. It is also the fostering of the sources of business income tax revenues for the government. This is the very purpose of the Act for Development of Small and Medium Enterprises.
[1]White Paper on Small and Medium Enterprises in Taiwan, 2018, p21 (November 9, 2018)
published by the Ministry of Economic Affairs
[2]Pursuant to the authorization conferred by Article 35 of the Act for Development of Small and Medium Enterprises, the Ministry of Economic Affairs has announced the Regulations Governing the Reduction of Expenditures for Small and Medium Enterprises Research and Development as Investment.
[3]Article 2 on the definition of SMEs. The abovementioned criterion is universally applicable to the Act for Development of Small and Medium Enterprises. It also applies to the eligibility of tax incentives to be introduced in this paper unless otherwise specified.
[4]Official Letter Economic-Business No. 10304605790, Ministry of Economic Affairs
[5]Official Letter Taiwan-Finance No. 10300207480, Ministry of Finance
[6]“Assessment of the Taxations under Article 35, Article 35-1, the first paragraph and the second paragraph of Article 36-2, the Act for Development of Small and Medium Enterprises” published by the Small and Medium Enterprise Administration, Ministry of Economic Affairs, pages 15-17, https://www.moeasmea.gov.tw/files/2670/93B9AF54-84E2-4293-A5CA-EA7DD9FAA05A(most recently browsed date September 9, 2019).
[7]Order of Interpretation Economics-Business No. 104004602510 from the Ministry of Economic Affairs: “Second, on the day when the economic indicator has reached the threshold, the paid-in capital of the new business should be at least NT$500,000 and there is no need to instill additional capital during the period when tax incentives are applicable. For existing businesses, there is no limitation on the number of capital increases during the applicable period. So long as the cumulative increase in capital reaches NT$500,000 and new employees are hired during the same fiscal year or during the prior fiscal year.”
[8]Paragraph 1, Article 2 of the Regulations for the Tax Preferences Provided to Small and Medium-sized Enterprises on Additional Wage Payment
Adopting Flexible Mechanism to Promote Public Procurement of Innovation—the Amendment of Article 27 of the Statute for Industrial Innovation I.Introduction To further industrial innovation, improve industrial environment, and enhance industrial competitiveness through a systematic long-term approach, the Statute for Industrial Innovation (hereinafter referred to as the Statute) has been formulated in Taiwan. The central government authority of this Statute is the Ministry of Economic Affairs, and the Industrial Development Bureau of the Ministry of Economic Affairs (henceforth referred to as the IDB) is the administrative body for the formulation of this Statute. Since its formulation and promulgation in 2010, the Statute has undergone four amendments. The latest amendment, passed by the Legislative Yuan on November 3, 2017, on the third reading, is a precipitate of the international industrial development trends. The government is actively encouraging the investment in industrial innovation through a combination of capital, R&D, advanced technologies and human resources to help the promotion of industrial transformation, hence this large scale amendment is conducted. The amendment, promulgated and enacted on November 22, 2017, focuses on eight key points, which include: state-owned businesses partaking in R&D (Article 9-1 of the amended provisions of the Statute), the tax concessions of the limited partnership venture capital businesses (Article 2, Article 10, Article 12-1 and Article 23-1 of the amended provisions of the Statute), the tax concessions of Angel Investors (Article 23-2 of the amended provisions of the Statute), applicable tax deferral of employees' stock compensation (Article 19-1 of the amended provisions of the Statute), tax deferral benefit of stocks given to research institution creators (Article 12-2 of the amended provisions of the Statute), the promotion of flexible mechanism for innovation procurement (Article 27 of the amended provisions of the Statute), the establishment of evaluation mechanism for intangible assets (Article 13 of the amended provisions of the Statute), and forced sale auction of idled land for industrial use (Article 46-1 of the amended provisions of the Statute). This paper focuses on the amendment of Article 27 of the Fourth Revision of the Statute, which is also one of the major focuses of this revision—promoting flexible mechanism for innovation procurement, using the mass-market purchasing power of the government as the energetic force for the development of industrial innovation. II.Explanation of the Amendment of Article 27 of the Statute 1.Purposes and Descriptions of the Amendment of Article 27 of the Statute The original intent of Article 27 (hereinafter referred to as the Article) of the Statute, prior to the latest amendment (content of the original provisions is shown in Table 1), was to encourage government agencies and enterprises to give a priority to using green products through the "priority procurement" provisions of Paragraph 2, which allow government agencies to award contracts to green product producers using special government procurement procedures, so as to increase the opportunities for government agencies to use green products, and thereby promote the sustainable development of the industry. In view of the inherent tasks of promoting the development of industrial innovation, and considering that, using the large-scale government procurement demand to guide industrial innovation activities, has become the policy instrument accepted by most advanced countries, the IDB expects that, with the latest amendment of Article 27, the procurement mechanism policy for software, innovative products and services, in addition to the original green products, may become influential, and that "innovative products and services" may be included in the scope of "Priority Procurement" of this Article namely, make “priority procurement of innovative products and services” as one of the flexible mechanisms for promoting innovation procurement. A comparison of the amended provisions and the original provisions is shown in Table 1, and an explanation of the amendment is described as follows:[1] Table 1 A Comparison of Article 27 Amendment of the Statute for Industrial Innovation Amended Provisions Original Provisions Article 27 (I) Each central government authority in charge of end enterprises of a specific industry shall encourage government organizations (agencies) and enterprises to procure software, innovative and green products or services. (II) To enhance the procurement efficiencies, as effected by supply and demand, the central government authority shall offer assistance and services to the organizations (agencies) that handle these procurements as described in the preceding paragraph; wherein, Inter-entity Supply Contracts that are required for the aforesaid procurements, the common requirements shall be decided, in accordance with policy requirements, upon consultation between the central government authority and each central government authority in charge of end enterprises of a specific industry. (III) Where the software, innovative and green products or services, as described in Paragraph 1, must be tested, audited, accredited and certified, their associated fees and charges may be reduced, exempted, or suspended. (IV) Government organizations (agencies) may specify in the tender document the priority procurement of innovative and green products or services that have been identified to meet the requirements of paragraph 1. However, such a specification shall not violate treaties or agreements that have been ratified by the Republic of China. The measures concerning specifications, categories, and identification procedures of software, innovative and green products or services as prescribed in Paragraph 1; the testing, auditing criteria, accreditation and certification as prescribed in paragraph 3; and the Priority Procurement in paragraph 4 and other relevant items, shall be established by each central government authority in charge of end-enterprises of a specific industry. Article 27 (I) Each central government authority in charge of end enterprises shall encourage government agencies and enterprises to give priority to green products that are energy/resources recyclable/renewable, energy and water saving, non-toxic, less-polluting, or able to reduce the burden on the environment. (II) Agencies may specify in the tender documents that priority is given to green products meeting the requirement set forth in the preceding Paragraph. (III) The regulations governing the specifications, categories, certification procedures, review standards, and other relevant matters relating to the green products as referred to in the preceding Paragraph shall be prescribed by the central government authorities in charge of end enterprises. Source: The Ministry of Economic Affairs (I).Paragraph 1 In order to compel each central government authority in charge of end enterprises of a specific industry to motivate industrial innovation activities and sustainable development on the basis of requirements, and to support the development of the software industry in Taiwan, the provision, that such an authority should encourage government organizations (agencies) and enterprises to procure software and innovative products and services, is added in paragraph 1. (II).Paragraph 2 This procurement, as described in paragraph 1, is different from the property or services procurement of general affairs as handled by various organizations. To enhance procurement efficiencies, as effected by supply and demand, the central government authority, i.e., the Ministry of Economic Affairs, shall provide relevant assistance and services to organizations (agencies) handling these procurements, hence the added provisions in paragraph 2. For purchases using inter-entity supply contracts, which are bound by the requirements of this Article, due to their prospective nature, and that the common demand of each organization is difficult to make an accurate estimate by using a demand survey or other method, the Ministry of Economic Affairs shall discuss the issues with each central government authority in charge of end-enterprises of a specific industry, who consult or promote policies, and are in charge of end enterprises of a specific industry, and then make decisions in accordance with the policy promotion requirements. (III).Paragraph 3 The fee schedule for testing, auditing, accrediting and certifying software, innovative and green products or services is covered by Article 7, Administrative Fees of the Charges And Fees Act. The authorities in charge should determine relevant fee standards.However, considering that the test, audit, accreditation and certification may be conducted during a trial or promotional period, or circumstances dictate that it is necessary to motivate tenderer participation, the fee may be reduced, waived or suspended; hence, paragraph 3 is added. (IV).Paragraph 4 Paragraph 2 of the original provision is moved to paragraph 4 with the revisions made to paragraph 1, accordingly, and the provision for using Priority Procurement to handle innovative products or services is added. However, for organizations covered by The Agreement on Government Procurement (GPA), due to Taiwan's accession to the WTO, ANZTEC, and ASTEP, their procurement of items covered in the aforesaid agreements with a value reaching the legislated threshold, shall be handled in accordance with the regulations stipulated in the aforesaid agreements; hence the stipulation in the proviso that the procurement must not violate the provisions of treaties or agreements ratified by the Taiwan government. (V).Paragraph 5 Paragraph 3 of the original Article is moved to paragraph 5 with the revisions made to paragraph 1, accordingly, and the provision, that authorizes each central government authority in charge of end enterprises of a specific industry to determine appropriate measures concerning the methods of defining software, innovative and green products and services, as well as matters relating to test, accreditation, certification and priority procurement, is added. 2.The Focus of the Amendment of Article 27 of the Statute—Promoting a Flexible Mechanism for Innovation Procurement As previously stated, the amendment of this Article aims to stimulate activities of industrial innovation by taking advantage of the huge demand from government agencies. With the government agencies being the users of the innovative products or services, government's procurement market potential is tapped to support the development of industrial innovation. The original intention of amendment is to incorporate the spirit of Public Procurement of Innovation[2] into this Article, and to try to introduce EU's innovation procurement mechanism[3] into our laws. So that, a procurement procedure, that is more flexible and not subject to the limitation of procurement procedures currently stipulated by the Government Procurement Act, may be adopted to facilitate government sector action in taking the lead on adopting innovative products or services that have just entered their commercial prototype stage, or utilizing the demand for innovation in the government sector to drive industry's innovative ideas or R&D (that can not be satisfied with the existing solutions in the marketplace). However, while it is assessing the relevant laws and regulations of our government procurement system and the practice of implementation, the use of the current government procurement mechanism by organizations in the public sector to achieve the targets of innovation procurement is still in its infancy. It is difficult to achieve the goal, in a short time, of establishing a variety of Public Procurement of Innovation Solutions (PPI Solutions) as disclosed in the EU's Directive 2014/24 / EU, enacted by the EU in 2014, in ways that are not subject to current government procurement legislation. Hence, the next best thing: Instead of setting up an innovative procurement mechanism in such a way that it is "not subject to the restrictions of the current government procurement law", we will focus on utilizing the flexible room available under the current system of government procurement laws and regulations, and promoting the "flexible mechanism for innovation procurement” paradigm. With the provisions now provided in Article 27 of the Statute for Industrial Innovation, the government sector is authorized to adopt the "Priority Procurement" method on innovative products and services, thus increasing the public sector's access to innovative products and services. With this amendment, in addition to the "green products" listed in the original provisions of paragraph 1 of the Statute, "software" and "innovative products or services"[4] are now incorporated into the target procurement scope and each central government authority in charge of end enterprises of a specific industry should now encourage government organizations and enterprises to implement; however, the provisions of this paragraph do not have the specific effect of law, they are declaratory provisions. Two priorities are the１ primary focus of the provisions of paragraph 2 and paragraph 4 of this Article for promoting flexible mechanism for innovation procurement: (I)The procurement of software, innovative and green products or services that uses Inter-entity Supply Contracts may rely on the "policy requirement" to establish the common demand. According to the first half of the provisions of paragraph 2 of this Article, the Ministry of Economic Affairs, being the central government authority of the Statute, may provide assistance and services to organizations dealing with the procurement of software, innovative and green products and services.This is because the procurement subjects, as pertaining to software, products or services that are innovative and green products (or services), usually have the particularities (especially in the software) of the information professions; different qualities (especially in innovative products or services), and are highly profession-specific. They are different from the general affairs goods and services procured by most government agencies. Hence, the Ministry of Economic Affairs may provide assistance and service to these procurement agencies, along with the coordination of relevant organizations, in matters relating to the aforesaid procurement process in order to improve procurement efficiency as relates to supply and demand. Pursuant to the second half of Paragraph 2 of this Article, if the inter-entity supply contract method is used to process the procurement of software, innovative products and services, green products (or services) and other related subjects, there could be "Commonly Required" by two or more organizations concerning the procurement subjects, so in accordance with the stipulations of Article 93 of the Government Procurement Act, and Article 2 of the Regulations for The Implementation of Inter-entity Supply Contracts[5], an investigation of common requirements should be conducted first. However, this type of subject is prospective and profession-specific (innovative products or services in particular), and government organizations are generally not sure whether they have demand or not, which makes it difficult to reliably estimate the demand via the traditional demand survey method[6], resulting in a major obstacle for the procurement process. Therefore, the provisions are now revised to allow the Ministry of Economic Affairs to discuss procurement with each central government authority in charge of end enterprises of a specific industry, who consult or promote policies (such as the National Development Council, or central government authority in charge of end enterprises of a specific industry relevant to the procurement subjects), and then make decisions based on the quantities of goods and services of common requirements in accordance with the demand for promoting the policy. The provisions explicitly stipulate such flexibility in adopting methods other than the "traditional demand survey" method, as is required by laws for the common demand of Inter-entity Supply Contracts. Thus, agencies currently handling procurement of prospective or innovative subjects using inter-entity supply contracts, may reduce the administrative burden typically associated with conducting their own procurement. In addition, with a larger purchase quantity demand, as generated from two or more organizations, the process can more effectively inject momentum into the industry, and achieve a win-win situation for both supply and demand. (II)Government organizations may adopt "Priority Procurement" when handling procurement of innovative and green products or services. Prior to the amendment, the original provision of paragraph 2 of this Article stipulates that organizations may specify in the tender document Priority Procurement of certified green products; Additionally, a provision of paragraph 3 of the original Article stipulates that each central government authority in charge of end enterprises of a specific industry is authorized to establish the specifications, categories and other relevant matters of the green products[7] (according to the interpretation of the original text, it should include "Priority Procurement" in paragraph 3 of the Article).After the amendment of the Article, paragraph 2 of the original Article is moved to paragraph 4. In addition to the original green products, "innovative products or services" are included in the scope of "Priority Procurement" that organizations are permitted to adopt (but, the "software" in paragraph 1 was not included[8]). However, for organizations covered by The Agreement on Government Procurement (GPA), due to Taiwan's accession to the WTO, ANZTEC, and ASTEP, their procurement of items covered by the aforesaid agreements with a value reaching the stated threshold, shall be handled in accordance with the regulations stipulated in the aforesaid agreements; hence the stipulation in the proviso that the procurement must not violate the provisions in treaties or agreements ratified by the Taiwan government. Additionally, paragraph 3 of the original Article is moved to paragraph 5. Each central government authority in charge of end enterprises of a specific industry is authorized to use their own judgment on matters concerning the specifications, categories, certification processes of software, innovative and green products or services and the method for Priority Procurement of paragraph 4. In accordance with the authorization in paragraph 5 of the amended provision of this Article, each central government authority in charge of end enterprises of a specific industry may, depending on the specific policy requirement that promotes innovation development of its supervised industry, establish methods of identification and the processes of Priority Procurement for “Specific categories of innovative products or services", especially on products or services fitting the requirements of the method of using the demands of government organizations to stimulate industrial innovation. The established "Regolations for priority procurement of Specific categories of innovative products or services" is essentially a special regulation of the government procurement legislation, which belongs to the level of regulations, that is, it allows the organizations to apply measures other than the government procurement regulations and its related measures to the procurement process, and adopt "Preferential Contract Awarding" for qualified innovative products or services. Any government agency that has the need to procure a particular category of innovative product or service may, in accordance with the provisions of paragraph 4 of this Article, specify the use of Priority Procurement in the tender document, and administer the procurement, in accordance with the process of this particular category of innovative products, or priority procurement. The agency is now enabled to follow a more flexible procurement process than that of the government procurement regulations to more smoothly award contracts for qualified innovative products or services. Citing two examples of this applied scenario: Example one, "innovative information services": The central government authority in charge of information services is IDB. Thus, IDB may, according to the authorization provided for in paragraph 5 of the Article, establish the identification methods for innovative information services (the purpose of which is to define the categories and specifications of innovative services covered in the scope of priority procurement) and priority procurement processes, pertaining to emerging information services that are more applicable to the requirements of government agencies, such as: cloud computing services, IoT services, and Big Data analysis services.Example two, "Innovative construction or engineering methods": The central government authority in charge of construction affairs is the Construction and Planning Agency of the Ministry of the Interior. Since the agency has already established the "Guidelines for Approval of Applications for New Construction Techniques, Methods, Equipment and Materials", the agency may establish a priority procurement process for new construction techniques, methods or equipment, in accordance with the stipulations in paragraph 5 of the Article. Government agencies may conduct procurement following any of these priority procurement practices, if there is a requirement for innovative information services, or new construction techniques, methods or equipment. In addition to the two aforementioned flexible mechanisms for innovation procurement, where government agencies are granted flexible procedures to handle the procurement of innovative products or services via the use of the flexible procurement mechanism, paragraph 3, concerning the incentive measures of concessionary deductions, is added to the Article to reduce the bidding costs for tenderers participating in the tender. For the Procurement of software, innovative and green products or services encouraged by each central government authority in charge of end-enterprises of a specific industry (not limited to those handled by the authorities themselves, using inter-entity supply contracts or priority procurement methods), if the procurement subjects are still required to be tested, audited, accredited and certified by the government agencies, such a process falls under the scope of administrative fees collection, pursuant to paragraph 1 Article 7 of the Charges And Fees Act. However, considering that the item subject to test, audit, accreditation and certification may be in a trial or promotional period, or that it may be necessary to motivate tenderer participation, the provisions of paragraph 3 are thusly added to the Article to reduce, waive, or suspend the collection of aforementioned fees. Executive authorities in charge of collecting administrative fees shall proceed to reduce, waive, or suspend the collection pursuant to the stipulations of paragraph 3 of the Article and Article 12 subparagraph 7 of the Charges And Fees Act.[9] III.The direction of devising supporting measures of flexible mechanism for innovation procurement The latest amendment of the Statute for Industrial Innovation was promulgated and enacted on November 22, 2017, it is imperative that supporting measures pertaining to Article 27 of the Statute be formulated. As previously stated, the flexible mechanism for innovation procurement, as promoted in this Article, is designed specifically for the products or services that are pertinent to the government procurement requirements and are capable of stimulating industrial innovation, and providing a more flexible government procurement procedure for central authorities in charge of a specific industry as a policy approach in supporting industry innovation. Thus, the premise of devising relevant supporting measures is dependent on whether the specific industry, as overseen by the particular central authority, has a policy in place for promoting the development of industrial innovation, and on whether it is suitable in promoting the flexible mechanism for innovation procurement as described in this Article. The purpose of this Article is to promote the flexible mechanism for innovation procurement. Supporting measures pertaining to this Article will focus on the promotion of devising an "Innovation Identification Method", and of the "Priority Procurement Process" of the innovative products or services of each industry that central government authorities oversee. The former will rely on each central government authority in charge of a specific industry to charter an industry-appropriate and profession-specific planning scheme; while, for the latter, the designing of a priority procurement process, in accordance with the nature of the various types of innovative products or services, does not have to be applicable to all. However, regardless what type of innovative products or services the priority procurement process is designed for, the general direction of consideration should be given to - taking the different qualities of innovative products or services as the core consideration. Additionally, the attribute of the priority procurement procedures focusing specifically on the different qualities of the innovative subjects relates to the special regulation relevant to the government procurement regulations. Thus, the procurement procedures should follow the principle that if no applicable stipulation is found in the special regulation, the provisions of the principal regulation shall apply. The so-called "Priority Procurement" process refers to the "Preferential Contract Awarding" on tenders that meet certain criteria in a government procurement procedure. The existing Government Procurement Act (GPA, for short) and its related laws that have specific stipulations on "Priority Procurement" can be found in the "Regulations for Priority Procurement of Eco-Products" (Regulations for Eco-Products Procurement, for short), and the "Regulations for Obliged Purchasing Units / Institutions to Purchase the Products and Services Provided by Disabled Welfare Institutions, Organizations or Sheltered Workshops" (Regulations for Priority Procurement of Products or Services for Disabled or Shelters, for short). After studying these two measures, the priority procurement procedures applicable to criteria-conformed subjects can be summarized into the following two types: 1.The first type: Giving preferential contract awarding to the tenderer who qualifies with "the lowest tender price”, as proposed in the tender document, and who meets a certain criteria (for example, tenderers of environmental products, disabled welfare institutions, or sheltered workshops). There are two scenarios: When a general tenderer and the criteria-conformed tenderer both submit the lowest tender price, the criteria-conformed tenderer shall obtain the right to be the "preferential winning tender" without having to go through the Price Comparison and Reduction Procedures. Additionally, if the lowest tender price is submitted by a general tenderer, then the criteria-conformed tenderers have the right to a "preferential price reduction” option, that is, the criteria-conformed tenderers can be contacted, in ascending order of the tender submitted, with a one time option to reduce their bidding prices. The first tenderer who reduces their price to the lowest amount shall win the tender. Both the Regulations for Eco-Products Procurement[10] and Regulations for Priority Procurement of Products or Services for Disabilities or Shelters[11] have such relevant stipulations. 2.The second type: It is permitted to give Preferential Contract Awarding to a criteria-conformed tenderer, when the submitted tender is within the rate of price preference. When the lowest tenderer is a general tenderer, and the tender submitted by the criteria-conformed tenderer is higher than the lowest tender price, the law permits that if the tender submitted is "within the rate of price preference ", as set by the procuring entity, the procuring entity may award the contract preferentially to "the tender submitted by the criteria-conformed tenderer." The premise for allowing this method is that the tender submitted by the criteria-conformed tenderer must be within the preferential price ratio. If the submitted tender is higher than the preferential price ratio, then the criteria-conformed tenderer does not have the right to preferential contract awarding. The contract will be awarded to theother criteria-conformed tenderer, or to a general tenderer. This method is covered in the provisions of the Regulations for Eco-Products Procurement[12]. However, the important premise for the above two priority procurement methods is that the nature of the subject matter of the tender is suitable for adopting the awarding principle of the lowest tender (Article 52, Paragraph 1, Subparagraphs 1 and 2 of the Procurement Act), that is, it is difficult to apply these methods to the subjects if they are different qualities. Pursuant to the provisions of Article 66 of the Enforcement Rules of the Government Procurement Act, the so-called "different qualities" refers to the construction work, property or services provided by different suppliers that are different in technology, quality, function, performance, characteristics, commercial terms, etc. Subjects of different qualities are essentially difficult to compare when based on the same specifications. If just looking at pricing alone it is difficult to identify the advantages and disadvantages of the subjects, hence, the awarding principle of the lowest tender is not appropriate. The innovative subjects are essentially subjects of different qualities, and under the same consideration, they are not suitable for applying the awarding principle of the lowest tender. Therefore, it is difficult to adopt the lowest-tender-based priority procurement method for the procurement of innovative subjects. In the case of innovative subjects with different qualities, the principle of the most advantageous tender should be adopted (Article 52 Paragraph 1 Subparagraph 3 of the Procurement Act) to identify the most qualified vender of the subjects through open selection. Therefore, the procedure for the priority procurement of innovative subjects with different qualities should be based on the most advantageous tender principle with focus on the "innovativeness" of the subjects, and consideration on how to give priority to tenderers, who qualify with the criteria of innovation. Pursuant to the provisions of Article 56 Paragraph 4 of the Procurement Act, the Procurement and Public Construction Commission has established the "Regulations for Evaluation of the Most Advantageous Tender". The tendering authorities adopting the most advantageous tender principle should abide by the evaluation method and procedures delineated in the method, and conduct an open selection of a winning tender. According to the Regulations for Evaluation of the Most Advantageous Tender, in addition to pricing, the tenderers' technology, quality, function, management, commercial terms, past performance of contract fulfillment, financial planning, and other matters pertaining to procurement functions or effectiveness, maybe chosen as evaluation criteria and sub-criteria. According to the three evaluation methods delineated in the provisions of Article 11 of the Regulations for Evaluation of the Most Advantageous Tender (overall evaluation score method, price per score point method, and ranking method), pricing could not been included in the scoring. That is, "the prices of the subjects" is not the absolute criterion of evaluation of the most advantageous tender process. The priority procurement procedures designed specifically for innovative subjects with different qualities may adopt an evaluation method that excludes "pricing" as part of the scoring criterion so as to give innovative subject tenderers the opportunity to be more competitive in the bidding evaluation process, and due to the extent of their innovativeness, obtain the right to preferential tenders. If it must be included in the scoring, the percentage of the total score for pricing should be reduced from its usual ratio[13], while stipulating explicitly that "innovation" must be included as part of the evaluation criteria. In addition, its weight distribution should not be less than a ratio that highlights the importance of innovation in the evaluation criteria. Furthermore, when determining how to give preference to tenderers who meet certain innovation criteria in the contract awarding procedures, care should be taken to stay on focus with the degree of innovation of the subject (the higher the degree of innovation, the higher the priority), rather than giving priority to arbitrary standards. In summary, with consideration of priority procurement procedures designed specifically for innovative subjects with different qualities, this paper proposes the following preliminary regulatory directions: 1.Adopt the awarding principle of the most advantageous tender. 2.Explicitly stipulate the inclusion of "innovation" in the evaluation criteria and sub-criteria, and its ratio, one that indicates its importance, should not be less than a certain percentage of the total score (for example 20%). 3.Reduce the distributed ratio of "price" in the scoring criteria in the open selection. 4.After the members of the evaluation committee have concluded the scoring, if more than two tenderers have attained the same highest overall evaluated score or lowest quotient of price divided by overall evaluated score, or more than two tenderers have attained the first ranking, the contract is awarded preferentially to the tenderer who scores the highest in the "innovation" criterion. 5.When multiple awards (according to Article 52 Paragraph 1 Subparagraph 4 of the Procurement Act) are adopted, that is, there is more than one final winning tender, the procuring entity may select the tenderers with higher innovation scores as the price negotiation targets for contract awarding, when there are more than two tenderers with the same ranking. Using the above method to highlight the value of innovative subjects will make these suppliers more competitive, because of their innovativeness ratings in the procurement procedures, and not confine them to the limitation of price-determination. So that, subject suppliers with a high degree of innovation, may attain the right to the preferential contract awarding that they deserve due to their innovativeness, and the procuring entity can purchase suitable innovative products in a more efficient and easy process. It also lowers the threshold for tenderers with innovation energy to enter the government procurement market, thus achieving the goal of supporting industrial innovation and creating a win-win scenario for supply and demand. [1] Cross-reference Table of Amended Provisions of the Statute for Industrial Innovation, The Ministry of Economic Affairs, https://www.moea.gov.tw/MNS/populace/news/wHandNews_File.ashx?file_id=59099 (Last viewed date: 12/08/2017). [2] According to the Guidance for public authorities on Public Procurement of Innovation issued by the Procurement of Innovation Platform in 2015, the so-called innovation procurement in essence refers to that the public sector can obtain innovative products, services, or work by using the government procurement processes, or that the public sector can administer government procurement with a new-and-better process. Either way, the implementation of innovation procurement philosophy is an important link between government procurement, R & D and innovation, which shortens the distance between the foresighted emerging technologies/processes and the public sector/users. [3] The EU's innovative procurement mechanism comprises the "Public Procurement of Innovation Solutions" (PPI Solutions) and "Pre-Commercial Procurement" (PCP). The former is one of the government procurement procedures, explicitly regulated in the new EU Public Procurement Directive (Directive 2014/24 / EU), for procuring solutions that are innovative, near or in preliminary commercial prototype; The latter is a procurement process designed to assist the public sector in obtaining technological innovative solutions that are not yet in commercial prototype, must undergo research and development process, and are not within the scope of EU Public Procurement Directive. [4] The "software, innovative and green products or services", as described in paragraph 1 of Article 27 of the amended Statute for Industrial Innovation, refers to, respectively, "software", "innovative products or services", and "green products or services" in general. There is no co-ordination or subordination relationship between the three; the same applies to "innovative and green products or services" in paragraph 4. [5] Article 93 of the Government Procurement Act stipulates: "An entity may execute an inter-entity supply contract with a supplier for the supply of property or services that are commonly needed by entities." Additionally, Article 2 of the Regulations for The Implementation of Inter-entity Supply Contracts stipulates: "The term 'property or services that are commonly needed by entities' referred to in Article 93 of the Act means property or services which are commonly required by two or more entities. The term 'inter-entity supply contract (hereinafter referred to as the “Contract”)' referred to in Article 93 of the Act means that an entity, on behalf of two or more entities, signs a contract with a supplier for property or services that are commonly needed by entities, so that the entity and other entities to which the Contract applies can utilize the Contract to conduct procurements." Therefore, according to the interpretation made by the Public Construction Commission, the Executive Yuan (PCC, for short), organizations handling inter-entity supply contracts should first conduct a demand investigation. [6] In general, organizations in charge of handling the inter-entity supply contracts will disseminate official documents to applicable organizations with an invitation to furnish information online about their interests and estimated requirement (for budget estimation) at government's e-procurement website. However, in the case of more prospective subjects (such as cloud services of the emerging industry), it may be difficult for an organization to accurately estimate the demand when filling out the survey, resulting in a mismatch of data between the demand survey and actual needs. [7] In accordance with the authorization of paragraph 3 of the Article, the IDB has established "Regulations Governing Examination and Identification of Advanced Recycled Products by Ministry of Economic Affairs" (including an appendix: Identification Specification for Resource Regenerating Green Products), except that the priority procurement process was not stipulated, because the Resource Regenerating Green Products, that meet the requirements of the Ministry of Economic Affairs, are covered by the "Category III Products" in the provisions of Article 6 of the existing "Regulations for Priority Procurement of Eco-Products", set forth by the PPC and The Environmental Protection Administration of the Executive Yuan. Hence, organizations that have the requirement to procure green products, may proceed with priority procurement by following the regulations in the "Regulations for Priority Procurement of Eco-Products". [8] After the amendment of the Article, the "software" in the provisions of paragraph 1 was excluded in paragraph 4, because the objective of paragraph 4 is to promote industry innovation and sustainable development with the use of a more flexible government procurement procedure. Thus, the subjects of the priority procurement mechanism are focused on "innovative" and "green" products or services, which exclude popular "software" that has a common standard in the market. However, if it is an "innovative software", it may be included in the "innovative products or services" in the provisions of paragraph 4. [9] According to the provisions of Article 12 of the Charges And Fees Act: "In any of the following cases, the executive authority in charge of the concerned matters may waive or reduce the amount of the charges and fees, or suspend the collection of the charges and fees: 7. Waiver, reduction, or suspension made under other applicable laws." [10] Refer to Article 12, Paragraph 1, Subparagraphs 1 and Article 13, Paragraph 1 and 2 of Regulations for Priority Procurement of Eco-Products. [11] Refer to Article 4 of Regulations for Obliged Purchasing Units / Institutions to Purchase the Products and Services Provided by Disabled Welfare Institutions, Organizations or Sheltered Workshops. [12] Refer to Article 12, Paragraph 1, Subparagraphs 2 and Article 13, Paragraph 3 of Regulations for Priority Procurement of Eco-Products. [13] The provisions of paragraph 3 Article 16 of the Regulations for Evaluation of the Most Advantageous Tender stipulates: Where price is included in scoring, its proportion of the overall score shall be not less than 20% and not more than 50%.
The Key Elements for Data Intermediaries to Deliver Their PromiseThe Key Elements for Data Intermediaries to Deliver Their Promise 2022/12/13 As human history enters the era of data economy, data has become the new oil. It feeds artificial intelligence algorithms that are disrupting how advertising, healthcare, transportation, insurance, and many other industries work. The excitement of having data as a key production input lies in the fact that it is a non-rivalrous good that does not diminish by consumption.[1] However, the fact that people are reluctant in sharing data due to privacy and trade secrets considerations has been preventing countries to realize the full value of data. [2] To release more data, policymakers and researchers have been exploring ways to overcome the trust dilemma. Of all the discussions, data intermediaries have become a major solution that governments are turning to. This article gives an overview of relevant policy developments concerning data intermediaries and a preliminary analysis of the key elements that policymakers should consider for data intermediaries to function well. I. Policy and Legal developments concerning data intermediaries In order to unlock data’s full value, many countries have started to focus on data intermediaries. For example, in 2021, the UK’s Department for Digital, Culture, Media and Sport (DCMS) commissioned the Centre for Data Ethics and Innovation (CDEI) to publish a report on data intermediaries[3] , in response to the 2020 National Data Strategy.[4] In 2020, the European Commission published its draft Data Governance Act (DGA)[5] , which aims to build up trust in data intermediaries and data altruism organizations, in response to the 2020 European Strategy for Data.[6] The act was adopted and approved in mid-2022 by the Parliament and Council; and will apply from 24 September 2023.[7] The Japanese government has also promoted the establishment of data intermediaries since 2019, publishing guidance to establish regulations on data trust and data banks.[8] II. Key considerations for designing effective data intermediary policy 1.Evaluate which type of data intermediary works best in the targeted country From CDEI’s report on data intermediaries and the confusion in DGA’s various versions of data intermediary’s definition, one could tell that there are many forms of data intermediaries. In fact, there are at least eight types of data intermediaries, including personal information management systems (PIMS), data custodians, data exchanges, industrial data platforms, data collaboratives, trusted third parties, data cooperatives, and data trusts.[9] Each type of data intermediary was designed to combat data-sharing issues in specific countries, cultures, and scenarios. Hence, policymakers need to evaluate which type of data intermediary is more suitable for their society and market culture, before investing more resources to promote them. For example, data trust came from the concept of trust—a trustee managing a trustor’s property rights on behalf of his interest. This practice emerged in the middle ages in England and has since developed into case law.[10] Thus, the idea of data trust is easily understood and trusted by the British people and companies. As a result, British people are more willing to believe that data trusts will manage their data on their behalf in their best interest and share their valuable data, compared to countries without a strong legal history of trusts. With more people sharing their data, trusts would have more bargaining power to negotiate contract terms that are more beneficial to data subjects than what individual data owners could have achieved. However, this model would not necessarily work for other countries without a strong foundation of trust law. 2.Quality signals required to build trust: A government certificate system can help overcome the lemon market problem The basis of trust in data intermediaries depends largely on whether the service provider is really neutral in its actions and does not reuse or sell off other parties’ data in secret. However, without a suitable way to signal their service quality, the market would end up with less high-quality service, as consumers would be reluctant to pay for higher-priced service that is more secure and trustworthy when they have no means to verify the exact quality.[11] This lemon market problem could only be solved by a certificate system established by actors that consumers trust, which in most cases is the government. The EU government clearly grasped this issue as a major obstacle to the encouragement of trust in data intermediaries and thus tackles it with a government register and verification system. According to the Data Government Act, data intermediation services providers who intend to provide services are required to notify the competent authority with information on their legal status, form, ownership structure, relevant subsidiaries, address, public website, contact details, the type of service they intend to provide, the estimated start date of activities…etc. This information would be provided on a website for consumers to review. In addition, they can request the competent authority to confirm their legal compliance status, which would in turn verify them as reliable entities that can use the ‘data intermediation services provider recognised in the Union’ label. 3.Overcoming trust issues with technology that self-enforces privacy: privacy-enhancing technologies (PETs) Even if there are verified data intermediation services available, businesses and consumers might still be reluctant to trust human organizations. A way to boost trust is to adopt technologies that self-enforces privacy. A real-world example is OpenSAFELY, a data intermediary implementing privacy-enhancing technologies (PETs) to provide health data sharing in a secure environment. Through a federated analytics system, researchers are able to conduct research with large volumes of healthcare data, without the ability to observe any data directly. Under such protection, UK NHS is willing to share its data for research purposes. The accuracy and timeliness of such research have provided key insights to inform the UK government in decision-making during the COVID-19 pandemic. With the benefits it can bring, unsurprisingly, PETs-related policies have become quite popular around the globe. In June 2022, Singapore launched its Digital Trust Centre (DTC) for accelerating PETs development and also signed a Memorandum of Understanding with the International Centre of Expertise of Montreal for the Advancement of Artificial Intelligence (CEIMIA) to collaborate on PETs.[12] On September 7th, 2022, the UK Information Commissioners’ Office (ICO) published draft guidance on PETs.[13] Moreover, the U.K. and U.S. governments are collaborating on PETs prize challenges, announcing the first phase winners on November 10th, 2022.[14] We could reasonably predict that more PETs-related policies would emerge in the coming year. [1] Yan Carrière-Swallow and Vikram Haksar, The Economics of Data, IMFBlog (Sept. 23, 2019), https://blogs.imf.org/2019/09/23/the-economics-of-data/#:~:text=Data%20has%20become%20a%20key,including%20oil%2C%20in%20important%20ways (last visited July 22, 2022). [2] Frontier Economics, Increasing access to data across the economy: Report prepared for the Department for Digital, Culture, Media, and Sport (2021), https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/974532/Frontier-access_to_data_report-26-03-2021.pdf (last visited July 22, 2022). [3] The Centre for Data Ethics and Innovation (CDEI), Unlocking the value of data: Exploring the role of data intermediaries (2021), https://assets.publishing.service.gov.uk/government/uploads/system/uploads/attachment_data/file/1004925/Data_intermediaries_-_accessible_version.pdf (last visited June 17, 2022). [4] Please refer to the guidelines for the selection of sponsors of the 2022 Social Innovation Summit: https://www.gov.uk/government/publications/uk-national-data-strategy/national-data-strategy(last visited June 17, 2022). [5] Regulation of the European Parliament and of the Council on European data governance and amending Regulation (EU) 2018/1724 (Data Governance Act), 2020/0340 (COD) final (May 4, 2022). [6] Communication from the Commission to the European Parliament, the Council, the European Economic and Social Committee and The Committee of the Regions— A European strategy for data, COM/2020/66 final (Feb 19, 2020). [7] Proposal for a Regulation on European Data Governance, European Parliament Legislative Train Schedule, https://www.europarl.europa.eu/legislative-train/theme-a-europe-fit-for-the-digital-age/file-data-governance-act(last visited Aug 17, 2022). [8] 周晨蕙，〈日本資訊信託功能認定指引第二版〉，科技法律研究所，https://stli.iii.org.tw/article-detail.aspx?no=67&tp=5&d=8422（最後瀏覽日期︰2022/05/30）。 [9] CDEI, supra note 3. [10] Ada Lovelace Institute, Exploring legal mechanisms for data stewardship (2021), 30~31,https://www.adalovelaceinstitute.org/wp-content/uploads/2021/03/Legal-mechanisms-for-data-stewardship_report_Ada_AI-Council-2.pdf (last visited Aug 17, 2022). [11] George A. Akerlof, The Market for "Lemons": Quality Uncertainty and the Market Mechanism, THE QUARTERLY JOURNAL OF ECONOMICS, 84(3), 488-500 (1970). [12] IMDA, MOU Signing Between IMDA and CEIMIA is a Step Forward in Cross-border Collaboration on Privacy Enhancing Technology (PET) (2022),https://www.imda.gov.sg/-/media/Imda/Files/News-and-Events/Media-Room/Media-Releases/2022/06/MOU-bet-IMDA-and-CEIMIA---ATxSG-1-Jun-2022.pdf (last visited Nov. 28, 2022). [13] ICO publishes guidance on privacy enhancing technologies, ICO, https://ico.org.uk/about-the-ico/media-centre/news-and-blogs/2022/09/ico-publishes-guidance-on-privacy-enhancing-technologies/ (last visited Nov. 27, 2022). [14] U.K. and U.S. governments collaborate on prize challenges to accelerate development and adoption of privacy-enhancing technologies, GOV.UK, https://www.gov.uk/government/news/uk-and-us-governments-collaborate-on-prize-challenges-to-accelerate-development-and-adoption-of-privacy-enhancing-technologies (last visited Nov. 28, 2022); Winners Announced in First Phase of UK-US Privacy-Enhancing Technologies Prize Challenges, NIST, https://www.nist.gov/news-events/news/2022/11/winners-announced-first-phase-uk-us-privacy-enhancing-technologies-prize (last visited Nov. 28, 2022).
Research on Policies for building a digital nation in Recent Years (2016-2017)Research on Policies for building a digital nation in Recent Years (2016-2017) Recent years, the government has already made some proactive actions, including some policies and initiatives, to enable development in the digital economy and fulfill the vision of Digital Nation. Those actions are as follows: 1. CREATING THE “FOOD CLOUD” FOR FOOD SAFETY CONTROLS Government agencies have joined forces to create an integrated “food cloud” application that quickly alerts authorities to food safety risks and allows for faster tracing of products and ingredients. The effort to create the cloud was spearheaded by the Executive Yuan’s Office of Food Safety under the leadership of Vice Premier Chang San-cheng on January 12, 2016. The “food cloud” application links five core systems (registration, tracing, reporting, testing, and inspection) from the Ministry of Health and Welfare (MOHW) with eight systems from the Ministry of Finance, Ministry of Economic Affairs, Ministry of Education (MOE), Council of Agriculture and Environmental Protection Administration. The application gathers shares and analyzes information in a methodical and systematic manner by employing big data technology. To ensure the data can flow properly across different agencies, the Office of Food Safety came up with several products not intended for human consumption and had the MOHW simulate the flow of those products under import, sale and supply chain distribution scenarios. The interministerial interface successfully analyzed the data and generated lists of food risks to help investigators focus on suspicious companies. Based on these simulation results, the MOHW on September 2, 2015, established a food and drug intelligence center as a mechanism for managing food safety risks and crises on the national level. The technologies for big data management and mega data analysis will enable authorities to better manage food sources and protect consumer health. In addition, food cloud systems established by individual government agencies are producing early results. The MOE, for instance, rolled out a school food ingredient registration platform in 2014, and by 2015 had implemented the system across 22 countries and cities at 6,000 schools supplying lunches for 4.5 million students. This platform, which made school lunch ingredients completely transparent, received the 2015 eAsia Award as international recognition for the use of information technology in ensuring food safety. 2. REVISING DIGITAL CONVERGENCE ACTS On 2016 May 5th, the Executive Yuan Council approved the National Communications Commission's (NCC) proposals, drafts of “Broadcasting Terrestrial and Channel Service Suppliers Administration Act”, “Multichannel Cable Platform Service Administration Act”, “Telecommunications Service Suppliers Act”, “Telecommunications Infrastructure and Resources Administration Act”, “Electronic Communications Act”, also the five digital convergence laws. They will be sent to the Legislature for deliberation. But in the end, this version of five digital convergence bills did not pass by the Legislature. However, later on, November 16, 2017, The Executive Yuan approved the new drafts of “Digital Communication Act” and the “Telecommunication Service Management Act”. The “Digital Communication Act” and the “Telecommunication Service Management Act” focused summaries as follows: 1. The digital communication bill A. Public consultation and participation. B. The digital communication service provider ought to use internet resource reasonability and reveal network traffic control measures. C. The digital communication service provider ought to reveal business information and Terms of Service. D. The responsibility of the digital communication service provider. 2. The telecommunication service management bill A. The telecommunication service management bill change to use registration system. B. The general obligation of telecommunications to provide telecommunication service and the special obligation of Specific telecommunications. C. Investment, giving, receiving and merging rules of the telecommunication service. Telecommunications are optimism of relaxing rules and regulations, and wish it would infuse new life and energy into the market. Premier Lai instructed the National Communications Commission and other agencies to elucidate the contents of the two communication bills to all sectors of society, and communicate closely with lawmakers of all parties to build support for a quick passage of the bills. 3. FOCUSING ON ICT SECURITY TO BUILD DIGITAL COUNTRIES Ｔhe development of ICT has brought convenience to life but often accompanied by the threat of illegal use, especially the crimes with the use of new technologies such as Internet techniques and has gradually become social security worries. Minor impacts may cause inconvenience to life while major impacts may lead to a breakdown of government functions and effects on national security. To enhance the capability of national security protection and to avoid the gap of national security, the Executive Yuan on August 1st 2016 has upgraded the Office of Information and Communication Security into the Agency of Information and Communication Security, a strategic center of R.O.C security work, integrating the mechanism of the whole government governance of information security, through specific responsibility, professionalism, designated persons and permanent organization to establish the security system, together with the relevant provisions of the law so that the country's information and communication security protection mechanism will become more complete. The efforts to the direction could be divided into three parts: First, strengthening the cooperation of government and private sectors of information security: In a sound basis of legal system, the government plans to strengthen the government and some private sectors’ information security protection abilities ,continue to study and modify the relevant amendments to the relevant provisions, strengthen public-private collaborative mechanism, deepen the training of human resources and enhance the protection of key information infrastructure of our country. Second, improving the information and communication security professional capability: information and communication security business is divided into policy and technical aspects. While the government takes the responsibility for policy planning and coordination, the technical service lies in an outsourcing way. Based on a sound legal system, the government will establish institutionalized and long-term operation modes and plan appropriate organizational structures through the discussion of experts and scholars from all walks of life. Third, formulating Information and Communication Safety Management Act and planning of the Fifth National Development Program for Information and Communication Security: The government is now actively promoting the Information and Communication Safety Management Act as the cornerstone for the development of the national digital security and information security industry. The main content of the Act provides that the applicable authorities should set up security protection plan at the core of risk management and the procedures of notification and contingency measures, and accept the relevant administrative check. Besides the vision of the Fifth National Development Program for Information and Communication Security which the government is planning now is to build a safe and reliable digital economy and establish a safe information and communication environment by completing the legal system of information and communication security environment, constructing joint defense system of the national Information and Communication security, pushing up the self-energy of the industries of information security and nurture high-quality human resources for elite talents for information security. 4. THE DIGITAL NATION AND INNOVATIVE ECONOMIC DEVELOPMENT PLAN The Digital Nation and Innovative Economic Development Plan (2017-2025) known as “DIGI+” plan, approved by the Executive Yuan on November 24, 2016. The plan wants to grow nation’s digital economy to NT $ 6.5 trillion (US$205.9 billion), improve the digital lifestyle services penetration rate to 80 %, increase broadband connections to 2 Gbps, ensure citizens’ basic rights to have 25 Mbps broadband access, and put our nation among the top 10 information technology nations worldwide by 2025. The plan contains several important development strategies: DIGI+ Infrastructure: Build infrastructure conducive to digital innovation. DIGI+ Talent: Cultivate digital innovation talent. DIGI+ Industry: Support cross-industry transformation through digital innovation. DIGI+ Rights: Make R.O.C. an advanced society that respects digital rights and supports open online communities. DIGI+ Cities: Build smart cities through cooperation among central and local governments and the industrial, academic and research sectors. DIGI+ Globalization: Boost nation’s standing in the global digital service economy. The plan also highlights few efforts: First is to enrich “soft” factors and workforce to create an innovative environment for digital development. To construct this environment, the government will construct an innovation-friendly legal framework, cultivate interdisciplinary digital talent, strengthen research and develop advanced digital technologies. Second is to enhance digital economy development. The government will incentivize innovative applications and optimize the environment for digital commerce. Third, the government will develop an open application programming interface for government data and create demand-oriented, one-stop smart government cloud services. Fourth, the government will ensure broadband access for the disadvantaged and citizens of the rural area, implement the participatory process, enhance different kinds of international cooperation, and construct a comprehensive humanitarian legal framework with digital development. Five is to build a sustainable smart country. The government will use smart network technology to build a better living environment, promote smart urban and rural area connective governance and construction and use on-site research and industries innovation ecosystem to assist local government plan and promote construction of the smart country. In order to achieve the overall effectiveness of the DIGI + program, interdisciplinary, inter-ministerial, inter-departmental and inter-departmental efforts will be required to collaborate with the newly launched Digital National Innovation Economy (DIGI +) Promotion Team. 5. ARTIFICIAL INTELLIGENCE SCIENTIFIC RESEARCH STRATEGY The Ministry of Science and Technology (MOST) reported strategy plan for artificial intelligence (AI) scientific research at Cabinet meeting on August 24, 2017. Artificial intelligence is a powerful and inevitable trend, and it will be critical to R.O.C.’s competitiveness for the next 30 years. The ministry will devote NT$16 billion over the next five years to building an AI innovation ecosystem in R.O.C. According to MOST, the plan will promote five strategies: 1. Creating an AI platform to provide R&D services MOST will devote NT$5 billion over the next four years to build a platform, integrating the resources, providing a shared high-speed computing environment and nurturing emerging AI industries and applications. 2. Establishing an AI innovative research center MOST will four artificial intelligence innovation research centers across R.O.C. as part of government efforts to enhance the nation’s competitiveness in AI technology. The centers will support the development of new AI in the realms of financial technology, smart manufacturing, smart healthcare and intelligent transportation systems. 3. Setting up AI robot maker spaces An NT$2 billion, four-year project assisting industry to develop the hardware-software integration of robots and innovative applications was announced by the Ministry of Science and Technology. 4. Subsidizing a semiconductor “moonshot” program to explore ambitious and groundbreaking smart technologies This program will invest NT$4 billion from 2018 through 2021 into developing semiconductors and chip systems for edge devices as well as integrating the academic sector’s R&D capabilities and resources. the project encompasses cognitive computing and AI processor chips; next-generation memory designs; process technologies and materials for key components of sensing devices; unmanned vehicles, AR and VR; IoT systems and security. 5. Organizing Formosa Grand Challenge competitions The program is held in competitions to engage young people in the development of AI applications. The government hopes to extend R.O.C.’s industrial advantages and bolster the country’s international competitiveness, giving R.O.C. the confidence to usher in the era of AI applications. All of these efforts will weave people, technologies, facilities, and businesses into a broader AI innovation ecosystem. 6. INTELLIGENT TRANSPORTATION SYSTEM PLANS Ministry of Transportation and Communications (MOTC) launched plans to develop intelligent transportation systems at March 7th in 2017. MOTC integrates transportation and information and communications technology through these plans to improve the convenience and reduce the congestion of the transportation. These plans combine traffic management systems for highways, freeways and urban roads, a multi-lane free-flow electronic toll collection system, bus information system that provides timely integrated traffic information services, and public transportation fare card readers to reduce transport accidence losses, inconvenience of rural area, congestion of main traffic arteries and improve accessibility of public transportation. There are six plans are included: 1. Intelligent transportation safety plan; 2. Relieve congestion on major traffic arteries; 3. Make transportation more convenient in Eastern Taiwan and remote areas; 4. Integrate and share transportation resources; 5. Develop “internet-of-vehicles” technology applications; and 6. Fundamental R&D for smart transportation technology. These plans promote research and development of smart vehicles and safety intersections, develop timely bus and traffic information tracking system, build a safe system of shared, safe and green-energy smart system, and subsidize the large vehicles to install the vision enhancement cameras to improve the safety of transportation. These plans also use eTag readers, vehicle sensors and info communication technologies to gather the traffic information and provide timely traffic guidance, reduce the congestion of the traffic flow. These plans try to use demand-responsive transit system with some measures such as combine public transportation and taxi, to improve the flexibility of the public traffic service and help the basic transportation needs of residents in eastern Taiwan and rural areas to be fulfilled. A mobile transport service interface and a platform that integrating booking and payment processes are also expected to be established to provide door-to-door transportation services and to integrate transportation resources. And develop demonstration projects of speed coordination of passenger coach fleets, vehicle-road interaction technology, and self-driving car to investigate and verify the issues in technological, operational, industrial, legal environments of internet-of-vehicles applications in our country. Last but not least, research and development on signal control systems that can be used in both two and four-wheeled vehicles, and deploy an internet-of-vehicles prototype platform and develop drones traffic applications. These plans are expected to reduce 25% traffic congestion, 20% of motor vehicle incidence, leverage 10% using rate of public transportation, raise 20% public transportation service accessibility of rural area and create NT$30 billion production value. After accomplishing these targets, the government can establish a comprehensive transportation system and guide industry development of relating technology areas. Through the aforementioned initiatives, programs, and plans, the government wants to construct the robust legal framework and policy environment for digital innovation development, and facilitate the quality of citizens in our society.
The Institutionalization of the Taiwan Personal Data Protection Committee - Triumph of Digital Constitutionalism: A Legal Positivism AnalysisThe Institutionalization of the Taiwan Personal Data Protection Committee - Triumph of Digital Constitutionalism: A Legal Positivism Analysis 2023/07/13 The Legislative Yuan recently passed an amendment to the Taiwan Personal Data Protection Act, which resulted in the institutionalization of the Taiwan Personal Data Protection Commission (hereunder the “PDPC”)[1]. This article aims to analyze the significance of this institutionalization from three different perspectives: legal positivism, digital constitutionalism, and Millian liberalism. By examining these frameworks, we can better understand the constitutional essence of sovereignty, the power dynamics among individuals, businesses, and governments, and the paradox of freedom that the PDPC addresses through governance and trust. I.Three Layers of Significance 1.Legal Positivism The institutionalization of the PDPC fully demonstrates the constitutional essence of sovereignty in the hands of citizens. Legal positivism emphasizes the importance of recognizing and obeying (the sovereign, of which it is obeyed by all but does not itself obey to anyone else, as Austin claims) laws that are enacted by legitimate authorities[2]. In this context, the institutionalization of the PDPC signifies the recognition of citizens' rights to control their personal data and the acknowledgment of the sovereign in protecting their privacy. It underscores the idea that the power to govern personal data rests with the individuals themselves, reinforcing the principles of legal positivism regarding sovereign Moreover, legal positivism recognizes the authority of the state in creating and enforcing laws. The institutionalization of the PDPC as a specialized commission with the power to regulate and enforce personal data protection laws represents the state's recognition of the need to address the challenges posed by the digital age. By investing the PDPC with the authority to oversee the proper handling and use of personal data, the state acknowledges its responsibility to protect the rights and interests of its citizens. 2.Digital Constitutionalism The institutionalization of the PDPC also rebalances the power structure among individuals, businesses, and governments in the digital realm[3]. Digital constitutionalism refers to the principles and norms that govern the relationship between individuals and the digital sphere, ensuring the protection of rights and liberties[4]. With the rise of technology and the increasing collection and use of personal data, individuals often find themselves at a disadvantage compared to powerful entities such as corporations and governments[5]. However, the PDPC acts as a regulatory body that safeguards individuals' interests, rectifying the power imbalances and promoting digital constitutionalism. By establishing clear rules and regulations regarding the collection, use, and transfer of personal data, the PDPC may set a framework that ensures the protection of individuals' privacy and data rights. It may enforce accountability among businesses and governments, holding them responsible for their data practices and creating a level playing field where individuals have a say in how their personal data is handled. 3.Millian Liberalism The need for the institutionalization of the PDPC embodies the paradox of freedom, as raised in John Stuart Mill’s “On Liberty”[6], where Mill recognizes that absolute freedom can lead to the infringement of others' rights and well-being. In this context, the institutionalization of the PDPC acknowledges the necessity of governance to mitigate the risks associated with personal data protection. In the digital age, the vast amount of personal data collected and processed by various entities raises concerns about privacy, security, and potential misuse. The institutionalization of the PDPC represents a commitment to address these concerns through responsible governance. By setting up rules, regulations, and enforcement mechanisms, the PDPC ensures that individuals' freedoms are preserved without compromising the rights and privacy of others. It strikes a delicate balance between individual autonomy and the broader social interest, shedding light on the paradox of freedom. II.Legal Positivism: Function and Authority of the PDPC 1.John Austin's Concept of Legal Positivism: Sovereignty, Punishment, Order To understand the function and authority of the PDPC, we turn to John Austin's concept of legal positivism. Austin posited that laws are commands issued by a sovereign authority and backed by sanctions[7]. Sovereignty entails the power to make and enforce laws within a given jurisdiction. In the case of the PDPC, its institutionalization by the Legislative Yuan reflects the recognition of its authority to create and enforce regulations concerning personal data protection. The PDPC, as an independent and specialized committee, possesses the necessary jurisdiction and competence to ensure compliance with the law, administer punishments for violations, and maintain order in the realm of personal data protection. 2.Dire Need for the Institutionalization of the PDPC There has been a dire need for the establishment of the PDPC following the Constitutional Court's decision in August 2022, holding that the government needed to establish a specific agency in charge of personal data-related issues[8]. This need reflects John Austin's concept of legal positivism, as it highlights the demand for a legitimate and authoritative body to regulate and oversee personal data protection. The PDPC's institutionalization serves as a response to the growing concerns surrounding data privacy, security breaches, and the increasing reliance on digital platforms. It signifies the de facto recognition of the need for a dedicated institution to safeguard the individual’s personal data rights, reinforcing the principles of legal positivism. Furthermore, the institutionalization of the PDPC demonstrates the responsiveness of the legislative branch to the evolving challenges posed by the digital age. The amendment to the Taiwan Personal Data Protection Act and the subsequent institutionalization of the PDPC are the outcomes of a democratic process, reflecting the will of the people and their desire for enhanced data protection measures. It signifies a commitment to uphold the rule of law and ensure the protection of citizens' rights in the face of emerging technologies and their impact on privacy. 3.Authority to Define Cross-Border Transfer of Personal Data Upon the establishment of the PDPC, it's authority to define what constitutes a cross-border transfer of personal data under Article 21 of the Personal Data Protection Act will then align with John Austin's theory on order. According to Austin, laws bring about order by regulating behavior and ensuring predictability in society. By granting the PDPC the power to determine cross-border data transfers, the legal framework brings clarity and consistency to the process. This promotes order by establishing clear guidelines and standards, reducing uncertainty, and enhancing the protection of personal data in the context of international data transfers. The PDPC's authority in this regard reflects the recognition of the need to regulate and monitor the cross-border transfer of personal data to protect individuals' privacy and prevent unauthorized use or abuse of their information. It ensures that the transfer of personal data across borders adheres to legal and ethical standards, contributing to the institutionalization of a comprehensive framework for cross-border data transfer. III.Conclusion In conclusion, the institutionalization of the Taiwan Personal Data Protection Committee represents the convergence of legal positivism, digital constitutionalism, and Millian liberalism. It signifies the recognition of citizens' sovereignty over their personal data, rebalances power dynamics in the digital realm, and addresses the paradox of freedom through responsible governance. By analyzing the PDPC's function and authority in the context of legal positivism, we understand its role as a regulatory body to maintain order and uphold the principles of legal positivism. The institutionalization of the PDPC serves as a milestone in Taiwan's commitment to protect individuals' personal data and safeguard the digital rights. In essence, the institutionalization of the Taiwan Personal Data Protection Committee represents a triumph of digital constitutionalism, where individuals' rights and interests are safeguarded, and power imbalances are rectified. It also embodies the recognition of the paradox of freedom and the need for responsible governance in the digital age in Taiwan. [1] Lin Ching-yin & Evelyn Yang, Bill to establish data protection agency clears legislative floor, CNA English News, FOCUS TAIWAN, May 16, 2023, https://focustaiwan.tw/society/202305160014 (last visited, July 13, 2023). [2] Legal positivism, Stanford Encyclopedia of Philosophy, https://plato.stanford.edu/entries/legal-positivism/?utm_source=fbia (last visited July 13, 2023). [3] Edoardo Celeste, Digital constitutionalism: how fundamental rights are turning digital, (2023): 13-36, https://doras.dcu.ie/28151/1/2023_Celeste_DIGITAL%20CONSTITUTIONALISM_%20HOW%20FUNDAMENTAL%20RIGHTS%20ARE%20TURNING%20DIGITAL.pdf (last visited July 3, 2023). [4] GIOVANNI DE GREGORIO, DIGITAL CONSTITUTIONALISM IN EUROPE: REFRAMING RIGHTS AND POWERS IN THE ALGORITHMIC SOCIETY 218 (2022). [5] Celeste Edoardo, Digital constitutionalism: how fundamental rights are turning digital (2023), https://doras.dcu.ie/28151/1/2023_Celeste_DIGITAL%20CONSTITUTIONALISM_%20HOW%20FUNDAMENTAL%20RIGHTS%20ARE%20TURNING%20DIGITAL.pdf (last visited July 13, 2023). [6]JOHN STUART MILL,On Liberty (1859), https://openlibrary-repo.ecampusontario.ca/jspui/bitstream/123456789/1310/1/On-Liberty-1645644599.pdf (last visited July 13, 2023). [7] Legal positivism, Stanford Encyclopedia of Philosophy, https://plato.stanford.edu/entries/legal-positivism/?utm_source=fbia (last visited July 13, 2023). [8] Lin Ching-yin & Evelyn Yang, Bill to establish data protection agency clears legislative floor, CNA English News, FOCUS TAIWAN, May 16, 2023, https://focustaiwan.tw/society/202305160014 (last visited, July 13, 2023).
- Impact of Government Organizational Reform to Scientific Research Legal System and Response Thereto (1) – For Example, The Finnish Innovation Fund (“SITRA”)
- The Demand of Intellectual Property Management for Taiwanese Enterprises
- Blockchain in Intellectual Property Protection
- Impact of Government Organizational Reform to Research Legal System and Response Thereto (2) – Observation of the Swiss Research Innovation System
- Recent Federal Decisions and Emerging Trends in U.S. Defend Trade Secrets Act Litigation
- The effective and innovative way to use the spectrum: focus on the development of the "interleaved/white space"
- Copyright Ownership for Outputs by Artificial Intelligence
- Impact of Government Organizational Reform to Research Legal System and Response Thereto (2) – Observation of the Swiss Research Innovation System