Analyzing the Framwork of the Regulation「Act For The Development of Biotech And New Pharmaceuticals Industry」in Taiwan

Taiwan Government passed The「Act for the Development of Biotech and New Pharmaceuticals Industry」for supporting the biopharmaceutical industry. The purpose of the Act is solely for biopharmaceutical industry, and building the leading economic force in Taiwan. To fulfill this goal, the Act has enacted regulations concerning funding, taxation and recruitment especially for the biopharmaceutical industry.

The Act has been seen as the recent important law in the arena of upgrading industry regulation on the island. It is also a rare case where single legislation took place for particular industry. After the Act came into force, the government has promulgated further regulations to supplement the Act, including Guidance for MOEA-Approved Biotech and New Pharmaceuticals Company Issuing Stock Certificate, Deductions on Investments in R&D and Personnel Training of Biotech and New Pharmaceuticals Company, Guidance for Deduction Applicable to Shareholders of Profit-Seeking Enterprises -Biotech and New Pharmaceuticals Company etc.

The following discussions are going to introduce the Act along with related incentive measures from an integrated standpoint.

1 、 Scope of Application

According to Article 3 of the Act, 「Biotech and New Pharmaceuticals Industry」 refers to the industry that deals in New Rugs and High-risk Medical devices used by human beings, animals, and plants; 「Biotech and New Pharmaceuticals Company」 refers to a company in the Biotech and New Pharmaceuticals Industry that is organized and incorporated in accordance with the Company Act and engages in the research, development, and manufacture of new drugs and high-risk medical devices. Thus, the Act applies to company that conducts research and manufacture product in new drug or high-risk medical devices for human and animal use. Furthermore, to become a Biotech and New Pharmaceuticals Company stipulated in the Act, the Company must receive letter of approval to establish as a Biotech and New Pharmaceuticals Company valid for five years. Consequently, company must submit application to the authority for approval by meeting the following requirements:
 (1) Companies that conduct any R&D activities or clinical trials must receive permission, product registration, or proof of manufacture for such activities from a competent authority. However, for those conducted these activities outside the country will not apply.
 (2) When applied for funding for the previous year or in the same year, the expense on R&D in the previous year exceeds 5% of the total net revenue within the same year; or the expenses exceeds 10% of the total capital of the company.
 (3) Hired at least five R&D personnel majored in biotechnology. For New Drug and High-Risk Medical Device are confined in specific areas. New Drug provided in the Act refers to a drug that has a new ingredient, a new therapeutic effect or a new administration method as verified by the central competent authorities. And High-Risk Medical Device refers to a type of Class III medical devices implanted into human bodies as verified by the central competent authorities. Therefore, generic drug, raw materials, unimplanted medical device, and medical device are not qualified as type III, are all not within the scope of the Act and are not the subject matter the Act intends to reward.

2 、 Tax Benefits

Article 5, 6 and 7 provided in the Act has followed the footsteps of Article 6 and 8 stipulated of the Statute, amending the rules tailored to the biopharmaceutical industry, and provided tax benefits to various entities as 「Biotech and New Pharmaceuticals Company」, 「Investors of Biotech and New Pharmaceuticals Industry」, 「Professionals and Technology Investors」.
 (1) Biotech and New Pharmaceuticals Company
In an effort to advance the biopharmaceutical industry, alleviate financial burden of the companies and strengthen their R&D capacity. The Act has provided favorable incentive measures in the sector of R&D and personnel training. According to Article 5: 「For the purpose of promoting the Biotech and New Pharmaceuticals Industry, a Biotech and New Pharmaceuticals Company may, for a period of five years from the time it is subject to profit-seeking enterprise income tax payable, enjoy a reduction in its corporate income tax payable, for up to 35% of the total funds invested in research and development (R&D) and personnel training each year.」 Consequently, company could benefit through tax deduction and relieve from the stress of business operation.
Moreover, in supporting Biotech and New Pharmaceutical Company to proceed in R&D and personnel training activities, the Act has set out rewards for those participate in ongoing R&D and training activities. As Article 5 provided that」 If the R&D expenditure of a particular year exceeds the average R&D expenditure of the previous two years, or if the personnel training expenditure of a particular year exceeds the average personnel training expenditure of the pervious two years, 50% of the exceed amount in excess of the average may be used to credit against the amount of profit-seeking enterprise income tax payable. 「However, the total amount of investment credited against by the payable corporate income tax in each year shall not exceed 50% of the amount of profit-seeking enterprise income tax payable by a Biotech and New Pharmaceuticals Company in a year, yet this restriction shall not apply to the amount to be offset in the last year of the aforementioned five-year period.
Lastly, Article 5 of the Act shall not apply to Biotech and New Pharmaceutical Company that set up headquarters or branches outside of Taiwan. Therefore, to be qualified for tax deduction on R&D and personnel training, the headquarters or branches of the company must be located in Taiwan.
 (2) Investors of Biotech and New Pharmaceuticals Company
To raise funding, expand business development, and attract investor continuing making investments, Article 6 of the Act has stated that 「In order to encourage the establishment or expansion of Biotech and New Pharmaceuticals Companies, a profit-seeking enterprise that subscribes for the stock issued by a Biotech and New Pharmaceuticals Company at the time of the latter's establishment or subsequent expansion; and has been a registered shareholder of the Biotech and New Pharmaceuticals Company for a period of 3 years or more, may, for a period of five years from the time it is subject to corporate income tax, enjoy a reduction in its profit-seeking enterprise income tax payable for up to 20% of the total amount of the price paid for the subscription of shares in such Biotech and New Pharmaceuticals Company.」 Yet 「If the afore-mentioned profit-seeking enterprise is a venture capital company (「VC」), such VC corporate shareholders may, for a period of five years from the fourth anniversary year of the date on which the VC becomes a registered shareholder of the subject Biotech and New Pharmaceuticals Company, enjoy a reduction in their profit-seeking enterprise income tax payable based on the total deductible amount enjoyed by the VC under Paragraph 1 hereof and the shareholders' respective shareholdings in the VC.」
The government enacted this regulation to encourage corporations and VC to invest in biotech and new pharmaceutical company, and thus provide corporate shareholders with 20% of profit-seeking enterprise income tax payable deduction, and provide VC corporate shareholders tax deduction that proportion to its shareholdings in the VC.
 (3) Top Executives and Technology Investors
Top Executives refer to those with biotechnology background, and has experience in serving as officer of chief executive (CEO) or manager; Technology Investors refer to those acquire shares through exchange of technology. As biopharmaceutical industry possesses a unique business model that demands intensive technology, whether top executives and technology investors are willing to participate in a high risk business and satisfy the needs of industry becomes a critical issue. Consequently, Article 7 of the Act stated that 「In order to encourage top executives and technology investors to participate in the operation of Biotech and New Pharmaceuticals Companies and R&D activities, and to share their achievements, new shares issued by a Biotech and New Pharmaceuticals Company to top executives and technology investors (in return of their knowledge and technology) shall be excluded from the amount of their consolidated income or corporate income of the then current year for taxation purposes; provided, however, that if the title to the aforesaid shares is transferred with or without consideration, or distributed as estate, the total purchase price or the market value of the shares at the time of transfer as a gift or distribution as estate shall be deemed income generated in that tax year and such income less the acquisition cost shall be reported in the relevant income tax return.」 Additionally, 「For the title transfer of shares under the preceding paragraph, the Biotech and New Pharmaceuticals Company concerned shall file a report with the local tax authorities within thirty 30 days from the following day of the title transfer.」 Purpose of this regulation is to attract top executives and technology personnel for the company in long-term through defer taxation.  

Moreover, the Biotech and New Pharmaceutical Company usually caught in a prolong period of losses, and has trouble financing through issuing new shares, as stipulated par value of each share cannot be less than NTD $10.Thus, in order to offer top executive and technology investors incentives and benefits under such circumstances, Article 8 has further provided that」Biotech and New Pharmaceutical Companies may issue subscription warrants to its top executives and technology investors, provided that the proposal for the issuance of the aforesaid subscription warrants shall pass resolution adopted by a majority votes of directors attended by at least two-thirds (2/3) of all the directors of the company; and be approved by the competent authorities. Holders of the subscription warrants may subscribe a specific number of shares at the stipulated price. The amount of stipulated price shall not be subject to the minimum requirement, i.e. par value of the shares, as prescribed under Article 140 of the Company Act. Subscription of the shares by exercising the subscription warrant shall be subject to income tax in accordance with Article 7 hereof. if a Biotech and New Pharmaceutical Company issue new shares pursuant to Article 7 hereof, Article 267 of the Company Act shall not apply. The top executives and technology investors shall not transfer the subscription warrant acquired to pursuant to this Article.」

These three types of tax benefits are detailed incentive measures tailor to the biopharmaceutical industry. However, what is noteworthy is the start date of the benefits provided in the Act. Different from the Statue, the Act allows company to enjoy these benefits when it begins to generate profits, while the Statute provides company tax benefits once the authority approved its application in the current year. Thus, Biotech and New Pharmaceuticals Company enjoys tax benefits as the company starts to make profit. Such approach reflects the actual business operation of the industry, and resolves the issue of tax benefits provided in the Statue is inapplicable to the biopharmaceutical industry.

3 、 Technical Assistance and Capital Investment

Due to the R&D capacity and research personnel largely remains in the academic circle, in order to encourage these researchers to convert R&D efforts into commercial practice, the government intends to enhance the collaboration among industrial players, public institutions, and the research and academic sectors, to bolster the development of Biotech and New Pharmaceuticals Company. However, Article 13 of Civil Servants Service Act prohibits officials from engaging in business operation, the Act lifts the restriction on civil servants. According to Article 10 of the Act provided that」For a newly established Biotech and New Pharmaceuticals Company, if the person providing a major technology is a research member of the government research organization, such person may, with the consent of the government research organization, acquired 10% or more of the shares in the Biotech and New Pharmaceuticals Company at the time of its establishment, and act as founder, director, or technical adviser thereof. In such case, Article 13 of the Civil Servants Service Act shall not apply. And the research organization and research member referred to thereof shall be defined and identified by the Executive Yuan, in consultation with the Examination Yuan.」

This regulation was enacted because of the Civil Servants Services Act provided that public officials are not allowed to be corporate shareholders. However, under certain regulations, civil servants are allowed to be corporate shareholders in the sector of agriculture, mining, transportation or publication, as value of the shares cannot exceed 10% of the total value of the company, and the civil servant does not served in the institution. In Taiwan, official and unofficial research institution encompasses most of the biotechnology R&D capacity and research personnel. If a researcher is working for a government research institution, he would be qualified as a public servant and shall be governed by the Civil Servants Service Act. As a result of such restriction, the Act has lifted the restriction and encouraged these researchers to infuse new technologies into the industry. At last, for advancing the development of the industry, Article 11 also provided that 」R&D personnel of the academic and research sectors may, subject to the consent of their employers, served as advisors or consultants for a Biotech and New Pharmaceuticals Company.」

4 、 Other Regulations

For introducing and transferring advanced technology in support of the biopharmaceutical industry, Article 9 stated that 「Organization formed with government funds to provide technical assistance shall provide appropriate technical assistance as may be necessary.」 Besides technical assistance, government streamlines the review process taken by various regulatory authorities, in order to achieve an improved product launch process result in faster time-to-market and time-to profit. As Article 12 provided that 「the review and approval of field test, clinical trials, product registration, and others, the central competent authorities shall establish an open and transparent procedure that unifies the review system.」

※Analyzing the Framwork of the Regulation「Act For The Development of Biotech And New Pharmaceuticals Industry」in Taiwan,STLI, https://stli.iii.org.tw/en/article-detail.aspx?d=6134&i=168&no=105&tp=2 (Date:2024/07/16)
Quote this paper
You may be interested
The Institutionalization of the Taiwan Personal Data Protection Committee - Triumph of Digital Constitutionalism: A Legal Positivism Analysis

The Institutionalization of the Taiwan Personal Data Protection Committee - Triumph of Digital Constitutionalism: A Legal Positivism Analysis 2023/07/13 The Legislative Yuan recently passed an amendment to the Taiwan Personal Data Protection Act, which resulted in the institutionalization of the Taiwan Personal Data Protection Commission (hereunder the “PDPC”)[1]. This article aims to analyze the significance of this institutionalization from three different perspectives: legal positivism, digital constitutionalism, and Millian liberalism. By examining these frameworks, we can better understand the constitutional essence of sovereignty, the power dynamics among individuals, businesses, and governments, and the paradox of freedom that the PDPC addresses through governance and trust. I.Three Layers of Significance 1.Legal Positivism The institutionalization of the PDPC fully demonstrates the constitutional essence of sovereignty in the hands of citizens. Legal positivism emphasizes the importance of recognizing and obeying (the sovereign, of which it is obeyed by all but does not itself obey to anyone else, as Austin claims) laws that are enacted by legitimate authorities[2]. In this context, the institutionalization of the PDPC signifies the recognition of citizens' rights to control their personal data and the acknowledgment of the sovereign in protecting their privacy. It underscores the idea that the power to govern personal data rests with the individuals themselves, reinforcing the principles of legal positivism regarding sovereign Moreover, legal positivism recognizes the authority of the state in creating and enforcing laws. The institutionalization of the PDPC as a specialized commission with the power to regulate and enforce personal data protection laws represents the state's recognition of the need to address the challenges posed by the digital age. By investing the PDPC with the authority to oversee the proper handling and use of personal data, the state acknowledges its responsibility to protect the rights and interests of its citizens. 2.Digital Constitutionalism The institutionalization of the PDPC also rebalances the power structure among individuals, businesses, and governments in the digital realm[3]. Digital constitutionalism refers to the principles and norms that govern the relationship between individuals and the digital sphere, ensuring the protection of rights and liberties[4]. With the rise of technology and the increasing collection and use of personal data, individuals often find themselves at a disadvantage compared to powerful entities such as corporations and governments[5]. However, the PDPC acts as a regulatory body that safeguards individuals' interests, rectifying the power imbalances and promoting digital constitutionalism. By establishing clear rules and regulations regarding the collection, use, and transfer of personal data, the PDPC may set a framework that ensures the protection of individuals' privacy and data rights. It may enforce accountability among businesses and governments, holding them responsible for their data practices and creating a level playing field where individuals have a say in how their personal data is handled. 3.Millian Liberalism The need for the institutionalization of the PDPC embodies the paradox of freedom, as raised in John Stuart Mill’s “On Liberty”[6], where Mill recognizes that absolute freedom can lead to the infringement of others' rights and well-being. In this context, the institutionalization of the PDPC acknowledges the necessity of governance to mitigate the risks associated with personal data protection. In the digital age, the vast amount of personal data collected and processed by various entities raises concerns about privacy, security, and potential misuse. The institutionalization of the PDPC represents a commitment to address these concerns through responsible governance. By setting up rules, regulations, and enforcement mechanisms, the PDPC ensures that individuals' freedoms are preserved without compromising the rights and privacy of others. It strikes a delicate balance between individual autonomy and the broader social interest, shedding light on the paradox of freedom. II.Legal Positivism: Function and Authority of the PDPC 1.John Austin's Concept of Legal Positivism: Sovereignty, Punishment, Order To understand the function and authority of the PDPC, we turn to John Austin's concept of legal positivism. Austin posited that laws are commands issued by a sovereign authority and backed by sanctions[7]. Sovereignty entails the power to make and enforce laws within a given jurisdiction. In the case of the PDPC, its institutionalization by the Legislative Yuan reflects the recognition of its authority to create and enforce regulations concerning personal data protection. The PDPC, as an independent and specialized committee, possesses the necessary jurisdiction and competence to ensure compliance with the law, administer punishments for violations, and maintain order in the realm of personal data protection. 2.Dire Need for the Institutionalization of the PDPC There has been a dire need for the establishment of the PDPC following the Constitutional Court's decision in August 2022, holding that the government needed to establish a specific agency in charge of personal data-related issues[8]. This need reflects John Austin's concept of legal positivism, as it highlights the demand for a legitimate and authoritative body to regulate and oversee personal data protection. The PDPC's institutionalization serves as a response to the growing concerns surrounding data privacy, security breaches, and the increasing reliance on digital platforms. It signifies the de facto recognition of the need for a dedicated institution to safeguard the individual’s personal data rights, reinforcing the principles of legal positivism. Furthermore, the institutionalization of the PDPC demonstrates the responsiveness of the legislative branch to the evolving challenges posed by the digital age. The amendment to the Taiwan Personal Data Protection Act and the subsequent institutionalization of the PDPC are the outcomes of a democratic process, reflecting the will of the people and their desire for enhanced data protection measures. It signifies a commitment to uphold the rule of law and ensure the protection of citizens' rights in the face of emerging technologies and their impact on privacy. 3.Authority to Define Cross-Border Transfer of Personal Data Upon the establishment of the PDPC, it's authority to define what constitutes a cross-border transfer of personal data under Article 21 of the Personal Data Protection Act will then align with John Austin's theory on order. According to Austin, laws bring about order by regulating behavior and ensuring predictability in society. By granting the PDPC the power to determine cross-border data transfers, the legal framework brings clarity and consistency to the process. This promotes order by establishing clear guidelines and standards, reducing uncertainty, and enhancing the protection of personal data in the context of international data transfers. The PDPC's authority in this regard reflects the recognition of the need to regulate and monitor the cross-border transfer of personal data to protect individuals' privacy and prevent unauthorized use or abuse of their information. It ensures that the transfer of personal data across borders adheres to legal and ethical standards, contributing to the institutionalization of a comprehensive framework for cross-border data transfer. III.Conclusion In conclusion, the institutionalization of the Taiwan Personal Data Protection Committee represents the convergence of legal positivism, digital constitutionalism, and Millian liberalism. It signifies the recognition of citizens' sovereignty over their personal data, rebalances power dynamics in the digital realm, and addresses the paradox of freedom through responsible governance. By analyzing the PDPC's function and authority in the context of legal positivism, we understand its role as a regulatory body to maintain order and uphold the principles of legal positivism. The institutionalization of the PDPC serves as a milestone in Taiwan's commitment to protect individuals' personal data and safeguard the digital rights. In essence, the institutionalization of the Taiwan Personal Data Protection Committee represents a triumph of digital constitutionalism, where individuals' rights and interests are safeguarded, and power imbalances are rectified. It also embodies the recognition of the paradox of freedom and the need for responsible governance in the digital age in Taiwan. [1] Lin Ching-yin & Evelyn Yang, Bill to establish data protection agency clears legislative floor, CNA English News, FOCUS TAIWAN, May 16, 2023, https://focustaiwan.tw/society/202305160014 (last visited, July 13, 2023). [2] Legal positivism, Stanford Encyclopedia of Philosophy, https://plato.stanford.edu/entries/legal-positivism/?utm_source=fbia (last visited July 13, 2023). [3] Edoardo Celeste, Digital constitutionalism: how fundamental rights are turning digital, (2023): 13-36, https://doras.dcu.ie/28151/1/2023_Celeste_DIGITAL%20CONSTITUTIONALISM_%20HOW%20FUNDAMENTAL%20RIGHTS%20ARE%20TURNING%20DIGITAL.pdf (last visited July 3, 2023). [4] GIOVANNI DE GREGORIO, DIGITAL CONSTITUTIONALISM IN EUROPE: REFRAMING RIGHTS AND POWERS IN THE ALGORITHMIC SOCIETY 218 (2022). [5] Celeste Edoardo, Digital constitutionalism: how fundamental rights are turning digital (2023), https://doras.dcu.ie/28151/1/2023_Celeste_DIGITAL%20CONSTITUTIONALISM_%20HOW%20FUNDAMENTAL%20RIGHTS%20ARE%20TURNING%20DIGITAL.pdf (last visited July 13, 2023). [6]JOHN STUART MILL,On Liberty (1859), https://openlibrary-repo.ecampusontario.ca/jspui/bitstream/123456789/1310/1/On-Liberty-1645644599.pdf (last visited July 13, 2023). [7] Legal positivism, Stanford Encyclopedia of Philosophy, https://plato.stanford.edu/entries/legal-positivism/?utm_source=fbia (last visited July 13, 2023). [8] Lin Ching-yin & Evelyn Yang, Bill to establish data protection agency clears legislative floor, CNA English News, FOCUS TAIWAN, May 16, 2023, https://focustaiwan.tw/society/202305160014 (last visited, July 13, 2023).

Impact of Government Organizational Reform to Research Legal System and Response Thereto (2) – Observation of the Swiss Research Innovation System

3.Commission of Technology and Innovation (CTI)   The CTI is also an institution dedicated to boosting innovation in Switzerland. Established in 1943, it was known as the Commission for the Promotion of Scientific Research[1]. It was initially established for the purpose of boosting economy and raising the employment rate, and renamed after 1996. The CTI and SNSF are two major entities dedicated to funding scientific research in Switzerland, and the difference between both resides in that the CTI is dedicated to funding R&D of the application technology and industrial technology helpful to Switzerland’s economic development.   Upon enforcement of the amended RIPA 2011, the CTI was officially independent from the Federal Office for Professional Education and Technology (OEPT) and became an independent entity entitled to making decisions and subordinated to the Federal Department of Economic Affairs (FDEA) directly[2]. The CTI is subject to the council system, consisting of 65 professional members delegated from industrial, academic and research sectors. The members assume the office as a part time job. CTI members are entitled to making decisions on funding, utilization of resources and granting of CTI Start-up Label independently[3].   The CTI primarily carries out the mission including promotion of R&D of industrial technology, enhancement of the market-orientation innovation process and delivery of R&D energy into the market to boost industrial innovation. For innovation, the CTI's core mission is categorized into[4]: (1)Funding technology R&D activities with market potential   The CTI invests considerable funds and resources in boosting the R&D of application technology and industrial technology. The CTI R&D Project is intended to fund private enterprises (particularly small-sized and medium-sized enterprises) to engage in R&D of innovation technology or product. The enterprises may propose their innovative ideas freely, and the CTI will decide whether the funds should be granted after assessing whether the ideas are innovative and potentially marketable[5].   CTI’s funding is conditioned on the industrial and academic cooperation. Therefore, the enterprises must work with at least one research institution (including a university, university of science and technology, or ETH) in the R&D. Considering that small-sized and medium-sized enterprises usually do not own enough working funds, technology and human resources to commercialize creative ideas, the CTI R&D Project is intended to resolve the problem about insufficient R&D energy and funds of small- and medium-sized enterprises by delivering the research institutions’ plentiful research energy and granting the private enterprises which work with research institutions (including university, university of science and technology, or ETH) the fund. Notably, CTI’s funding is applicable to R&D expenses only, e.g., research personnel’s salary and expenditure in equipment & materials, and allocated to the research institutions directly. Meanwhile, in order to enhance private enterprises' launch into R&D projects and make them liable for the R&D success or failure, CTI’s funding will be no more than 50% of the total R&D budget and, therefore, the enterprises are entitled to a high degree of control right in the process of R&D.   The industrial types which the CTI R&D Project may apply to are not limited. Any innovative ideas with commercial potential may be proposed. For the time being, the key areas funded by CTI include the life science, engineering science, Nano technology and enabling sciences, etc.[6] It intends to keep Switzerland in the lead in these areas. As of 2011, in order to mitigate the impact of drastic CHF revaluation to the industries, the CTI launched its new R&D project, the CTI Voucher[7]. Given this, the CTI is not only an entity dedicated to funding but also plays an intermediary role in the industrial and academic sectors. Enterprises may submit proposals before finding any academic research institution partner. Upon preliminary examination of the proposals, the CTI will introduce competent academic research institutions to work with the enterprises in R&D, subject to the enterprises' R&D needs. After the cooperative partner is confirmed, CTI will grant the fund amounting to no more than CHF3,500,000 per application[8], provided that the funding shall be no more than 50% of the R&D project expenditure.   The CTI R&D Project not only boosts innovation but also raises private enterprises’ willingness to participate in the academic and industrial cooperation, thereby narrowing the gap between the supply & demand of innovation R&D in the industrial and academic sectors. Notably, the Project has achieved remarkable effect in driving private enterprises’ investment in technology R&D. According to statistical data, in 2011, the CTI solicited additional investment of CHF1.3 from a private enterprise by investing each CHF1[9]. This is also one of the important reasons why the Swiss innovation system always acts vigorously. Table 1  2005-2011 Passing rate of application for R&D funding Year 2011 2010 2009 2008 2007 2006 2005 Quantity of applications 590 780 637 444 493 407 522 Quantity of funded applications 293 343 319 250 277 227 251 Pass rate 56% 44% 50% 56% 56% 56% 48% Data source: Prepared by the Study (2)Guiding high-tech start-up   Switzerland has learnt that high-tech start-ups are critical to the creation of high-quality employment and boosting of economic growth, and start-ups were able to commercialize the R&D results. Therefore, as of 2001, Switzerland successively launched the CTI Entrepreneurship and CTI Startup to promote entrepreneurship and cultivate high-tech start-ups. 1.CTI Entrepreneurship   The CTI Entrepreneurship was primarily implemented by the Venture Lab founded by CTI investment. The Venture Lab launched a series of entrepreneurship promotion and training courses, covering day workshops, five-day entrepreneurship intensive courses, and entrepreneurship courses available in universities. Each training course was reviewed by experts, and the experts would provide positive advice to attendants about innovative ideas and business models. Data source: Venture Lab Site Fig. 3  Venture Lab Startup Program 2.CTI Startup   The CTI is dedicated to driving the economy by virtue of innovation as its priority mission. In order to cultivate the domestic start-ups with high growth potential in Switzerland, the CTI Startup project was launched in 1996[10] in order to provide entrepreneurs with the relevant guidance services. The project selected young entrepreneurs who provided innovative ideas, and guided them in the process of business start to work their innovative ideas and incorporate competitive start-ups.   In order to enable the funding and resources to be utilized effectively, the CTI Startup project enrolled entrepreneurs under very strict procedure, which may be categorized into four stages[11]: Data source: CTI Startup Site Fig. 4  Startup Plan Flow Chart   In the first stage, the CTI would preliminarily examine whether the applicant’s idea was innovative and whether it was technologically feasible, and help the applicant register with the CTI Startup project. Upon registration, a more concrete professional examination would be conducted at the second stage. The scope of examination included the technology, market, feasibility and management team’s competence. After that, at the stage of professional guidance, each team would be assigned a professional “entrepreneurship mentor”, who would help the team develop further and optimize the enterprise’s strategy, flow and business model in the process of business start, and provide guidance and advice on the concrete business issues encountered by the start-up. The stage of professional guidance was intended to guide start-ups to acquire the CTI Startup Label, as the CTI Startup Label was granted subject to very strict examination procedure. For example, in 2012, the CTI Startup project accepted 78 applications for entrepreneurship guidance, but finally the CTI Startup Label was granted to 27 applications only[12]. Since 1996, a total of 296 start-ups have acquired the CTI Startup Label, and more than 86% thereof are still operating now[13]. Apparently, the CTI Startup Label represents the certification for innovation and on-going development competence; therefore, it is more favored by investors at the stage of fund raising. Table 2  Execution of start-up plans for the latest three years Quantity of application Quantity of accepted application Quantity of CTI Label granted 2012 177 78 27 2011 160 80 26 2010 141 61 24 Data source: CTI Annual Report, prepared by the Study   Meanwhile, the “CTI Invest” platform was established to help start-up raise funds at the very beginning to help commercialize R&D results and cross the valley in the process of R&D innovation. The platform is a private non-business-making organization, a high-tech start-up fund raising platform co-established by CTI and Swiss investors[14]. It is engaged in increasing exposure of the start-ups and contact with investors by organizing activities, in order to help the start-ups acquire investment funds. (3)Facilitating transfer of knowledge and technology between the academic sector and industrial sector   KTT Support (Knowledge & Technology Transfer (KTT Support) is identified as another policy instrument dedicated to boosting innovation by the CTI. It is intended to facilitate the exchange of knowledge and technology between academic research institutions and private enterprises, in order to transfer and expand the innovation energy.   As of 2013, the CTI has launched a brand new KTT Support project targeting at small-sized and medium-sized enterprises. The new KTT Support project consisted of three factors, including National Thematic Networks (NTNs), Innovation Mentors, and Physical and web-based platforms. Upon the CTI’s strict evaluation and consideration, a total of 8 cooperative innovation subjects were identified in 2012, namely, carbon fiber composite materials, design idea innovation, surface innovation, food study, Swiss biotechnology, wood innovation, photonics and logistics network, etc.[15] One NTN would be established per subject. The CTI would fund these NTNs to support the establishment of liaison channels and cooperative relations between academic research institutions and industries and provide small- and medium-sized enterprises in Switzerland with more rapid and easy channel to access technologies to promote the exchange of knowledge and technology between both parties. Innovation Mentors were professionals retained by the CTI, primarily responsible for evaluating the small-sized and medium-sized enterprises’ need and chance for innovation R&D and helping the enterprises solicit competent academic research partners to engage in the transfer of technology. The third factor of KTT Support, Physical and web-based platforms, is intended to help academic research institutions and private enterprises establish physical liaison channels through organization of activities and installation of network communication platforms, to enable the information about knowledge and technology transfer to be more transparent and communicable widely.   In conclusion, the CTI has been dedicated to enhancing the link between scientific research and the industries and urging the industrial sector to involve and boost the R&D projects with market potential. The CTI’s business lines are all equipped with corresponding policy instruments to achieve the industrial-academic cooperation target and mitigate the gap between the industry and academic sectors in the innovation chain. The various CTI policy instruments may be applied in the following manner as identified in the following figure. Data source: CTI Annual Report 2011 Fig. 5  Application of CTI Policy Instrument to Innovation Chain III. Swiss Technology R&D Budget Management and Allocation   The Swiss Federal Government has invested considerable expenditures in technology R&D. According to statistic data provided by Swiss Federal Statistical Office (FSO) and OECD, the Swiss research expenditures accounted for 2.37% of the Federal Government’s total expenditures, following the U.S.A. and South Korea (see Fig. 6). Meanwhile, the research expenditures of the Swiss Government grew from CHF2.777 billion in 2000 to CHF4.639 billion in 2010, an average yearly growth rate of 5.9% (see Fig. 7). It is clear that Switzerland highly values its technology R&D. Data source: FSO and OECD Fig. 6 Percentage of Research Expenditures in Various Country Governments’ Total Expenditures (2008) Data source: FSO and OECD Fig. 7  Swiss Government Research Expenditures 2000-2010 1.Management of Swiss Technology R&D Budget   Swiss research expenditures are primarily allocated to the education, R&D and innovation areas, and play an important role in the Swiss innovation system. Therefore, a large part of the Swiss research expenditures are allocated to institutions of higher education, including ETH, universities, and UASs. The Swiss research expenditures are utilized by three hierarchies[16] (see Fig. 8): Government R&D funding agencies: The Swiss research budget is primarily executed by three agencies, including SERI, Federal Department of Economic Affairs, Education and Research, and Swiss Agency for Development and Cooperation (SDC). Intermediary R&D funding agencies: Including SNSC and CTI. Funding of R&D performing institutions: Including private enterprises, institutions of higher education and private non-profit-making business, et al.   Therefore, the Swiss Government research expenditures may be utilized by the Federal Government directly, or assigned to intermediary agencies, which will allocate the same to the R&D performing institutions. SERI will allocate the research expenditures to institutions of higher education and also hand a lot of the expenditures over to SNSF for consolidated funding to the basic science of R&D. Data source: FSO Fig. 8  Swiss Research Fund Utilization Mechanism ~to be continued~ [1] ORGANIZATION FOR ECONNOMIC CO-OPERATION AND DEVELOPMENT [OECD], OECD Reviews of Innovation Policy: Switzerland 27 (2006). [2] As of January 1, 2013, the Federal Ministry of Economic Affairs was reorganized, and renamed into Federal Department of Economic Affairs, Education and Research (EAER). [3] The Commission for Technology and Innovation CTI, THE COMMISSION FOR TECHOLOGY AND INNOVATION CTI, http://www.kti.admin.ch/org/00079/index.html?lang=en (last visited Jun. 3, 2013). [4] Id. [5] CTI INVEST, Swiss Venture Guide 2012 (2012), at 44, http://www.cti-invest.ch/getattachment/7f901c03-0fe6-43b5-be47-6d05b6b84133/Full-Version.aspx (last visited Jun. 4, 2013). [6] CTI, CTI Activity Report 2012 14 (2013), available at http://www.kti.admin.ch/dokumentation/00077/index.html?lang=en&download=NHzLpZeg7t,lnp6I0NTU042l2Z6ln1ad1IZn4Z2qZpnO2Yuq2Z6gpJCDen16fmym162epYbg2c_JjKbNoKSn6A-- (last visited Jun. 3, 2013). [7] CTI Voucher, THE COMMISSION FOR TECHOLOGY AND INNOVATION CTI, http://www.kti.admin.ch/projektfoerderung/00025/00135/index.html?lang=en (last visited Jun. 3, 2013). [8] Id. [9] CTI, CTI Activity Report 2011 20 (2012), available at http://www.kti.admin.ch/dokumentation/00077/index.html?lang=en&download=NHzLpZeg7t,lnp6I0NTU042l2Z6ln1ad1IZn4Z2qZpnO2Yuq2Z6gpJCDeYR,gWym162epYbg2c_JjKbNoKSn6A--(last visited Jun. 3, 2013). [10] CTI Start-up Brings Science to Market, THE COMMISSION FOR TECHOLOGY AND INNOVATION CTI, http://www.ctistartup.ch/en/about/cti-start-/cti-start-up/ (last visited Jun. 5, 2013). [11] Id. [12] Supra note 8, at 45. [13] Id. [14] CTI Invest, http://www.cti-invest.ch/About/CTI-Invest.aspx (last visited Jun. 5, 2013). [15] KTT Support, CTI, http://www.kti.admin.ch/netzwerke/index.html?lang=en (last visited Jun.5, 2013). [16] Swiss Federal Statistics Office (SFO), Public Funding of Research in Switzerland 2000–2010 (2012), available at http://www.bfs.admin.ch/bfs/portal/en/index/themen/04/22/publ.Document.163273.pdf (last visited Jun. 20, 2013).

Executive Yuan Yuan Promoted “Productivity 4.0” to Boost Global Competitiveness

Executive Yuan Yuan Promoted “Productivity 4.0” to Boost Global Competitiveness 1.Executive Yuan held the “Productivity 4.0: Strategy Review Board Meeting” to boost industrial transformation The Executive Yuan held the “Productivity 4.0: Strategy Review Board Meeting” on June 4-5th , 2015. The GDP per capita of manufacturing and service industries, including machinery, metal processing, transportation vehicles, 3C, food, textile, logistics, health care, and agriculture, are expected to be over 10 million NT dollars by 2024. This meeting focuses on three topics: Productivity 4.0 industry and technology development strategy, advanced development strategy on advanced manufacturing and innovation application, and strategy on engineering smart tech talents cultivation and Industry-academic Cooperation. The three main themes to be used to put the advanced manufacturing into force are smart automation and robots, sensing and control technologies from Internet of Things (IoT), and technologies used in analyzing the big data. As a result, the digitalization of small- and medium-sized business and smart operation of big business are as the cornerstones to build service-oriented systems and develop advanced manufacturing in R.O.C.. Facing challenges of labor shortages and aging labor forces, the Executive Yuan is planning to implement “Productivity 4.0” to stimulate the process of industry transformation of value-added innovation and provide new products and services in global market. In implementing the above-mentioned policy goals, the Executive Yuan is planning three directions to be followed. First, global competitiveness is depended upon key technologies. As OEMs, manufacturing industry in R.O.C. is unable to provide products of self-owned brand and is vulnerable while facing challenges from other transnational companies. Second, the Premier, Dr. Mao Chi-kuo, made reference of the bicycle industry’s successful development model as an example for the Productivity 4.0 “A-Team” model. Through combining technologies and organizations, the aim is to build competitive supply chains across all the small- and medium-sized business. Finally, the new skills training and the cultivation of talents are more urgent than ever before. While technical and vocational schools, universities and postgraduate studies are needed to be equipped with sufficient fundamental knowledge, those already in the job market have to learn the skills and knowledge necessary for industrial transformation so that they could contribute their capabilities and wisdom for Ourfuture. 2.Executive Yuan Approved “Productivity 4.0 Initiative” to Promote Industry Innovation and Transformation The Executive Yuan has approved the Productivity 4.0 Initiative on September 17, 2015. Before its approval, the Office of Science and Technology (OST) gave a presentation on the Draft of the Productivity 4.0 Initiative on July 23, 2015 detailing the underlying motives behind the program. Confronted with the challenges our traditional industries and OEMs meet, including labor shortages (the national laboring population ranging from age 15 to 65 has seen a substantial decrease of 0.18 to 0.2 million annually) and a aging labor force, the the Productivity 4.0 Initiative sets the directions for industrial development tackling these issues through six main strategies: enhancing and fine-tuning flagship industries’ smart-supply-chain ecosystems, encouraging the establishing of startups, localizing production and services, securing autonomy in key technologies, cultivating practical and technical talents and injection of industrial policy tools. After hearing the presentation on the Initiative, the Premier, Mao Chi-kuo, made reference to the core ideas of the Productivity 4.0 Initiative in his concluding remarks. “The core concept of the Productivity 4.0 Initiative is to propel R.O.C. to a pivotal position in the global manufacturing supply chain by capitalizing on the nation’s core strength in industrial technology, while fostering an outstanding work environment stimulating synergy between employees and automotive systems in order to cope with R.O.C.’s imminent labor shortage,” Mao said Also focusing on the Productivity 4.0 Initiative, the Premier gave a keynote speech titled ‘Views on the current economic and social issues’ at the Third Wednesday Club. He takes the view that the GDP downslide is of a structural nature and the government is going to guide the economy towards an upward path by assisting industries to innovate and transform. In an effort to remove the three major obstacles to innovation and entrepreneurship— discouraging laws and regulations, difficulty in raising capital and gathering financing as well as lack of international partnerships, the government has been diligently promoting the Third Party Payment Act as well as setting-up R.O.C. Rapid Innovation Prototyping League for Enterprises. Among these measures, Industry 4.0 has been at the core of the Initiative, in which cyber-physical production system (CPS) would be introduced by integrating Cloud-computing and Internet of Things technology to spur industrial transformations, specifically industrial manufacturing, added-value services and agricultural production. The Productivity 4.0 Initiative is an imperative measure in dealing with R.O.C.’s imminent issues of labor shortage, and the aging society, its promising effects are waiting to unfold. 3.Executive Yuan’s Further Addendum to “Productivity 4.0 Plan”: Attainment of Core Technologies and the Cultivation of Domestic Technical Talents In an continual effort to put in place the most integrated infrastructural setting for the flourishing of its “Productivity 4.0 Plan”, Executive Yuan Premier Mao Chi-Kuo announced on the 22nd October that the overhaul infrastructural set-up will be focused on the development of core technologies and the cultivation of skilled technical labor. To this end, the Executive Yuan is gathering participation and resources from the Ministry of Economic Affairs (hereafter MOEA), Ministry of Education, Ministry of Science and Technology, Ministry of Labor, the Council of Agriculture, among other governmental bodies, collecting experiences and knowledge from academia and researchers, in order to improve the development of pivotal technologies, the training of skilled technical labor and consequently to improve and reform the present education system so as to meet the aforementioned goals. Premier Mao Chi-Kuo pointed out that Productivity 4.0 is a production concept in which the industry is evolved from mere automation- to intelligent-based manufacturing, shifting towards a “small-volume, large-variety” production paradigm, closing the gaps between production and consumption sides through direct communication, hence allowing industry to push itself further on changing its old efficiency-based production model to an innovation-driven one. Apart from the Research and Development efforts geared towards key technologies, Premier Mao stressed that the people element, involved in this transformative process, is what dictates Productivity 4.0 Plan’s success. The cross-over or multi-disciplinary capability of the labor force is especially significant. In order to bring up the necessary work force needed for Productivity 4.0, besides raising support for the needed Research and Development, an extensive effort should be placed in reforming and upgrading the current educational system, as well as the technical labor and internal corporate educational structure. Moreover, an efficient platform should be implemented so that opinions and experiences could be pooled out, thus fostering closer ties between industry, academia and research. The MOEA stated that the fundamental premise behind the Productivity 4.0 strategy is that by way of systematic, brand-orientated formation of technical support groups, constituted by members of industry, academia and research, will we able to develop key sensor, internet and core technologies for our manufacturing, business and agriculture sector. It is estimated that by the end of year 2016, the Executive Yuan will have completed 6 major Productivity 4.0 production lines; supported the development of technical personnel in smart manufacturing, smart business and smart agriculture, amounting to 2,500 persons; established 4 inter-university, inter-disciplinary strategic partnerships in order to prepare much needed labor force for the realization of the Productivity 4.0 Plan. It is estimated that by the year 2020, industry has already developed the key technologies through the Productivity 4.0 platform, aiding to decrease by 50% the time currently needed to for Research and Development, increasing the technological sovereignty by 50% and accrue production efficiency by 15% and above. Furthermore, through the educational reforms, the nation will be able to lay solid foundations for its future labor talents, as well as connecting them to the world at large, effectively making them fit to face the global markets and to upgrade their production model.

Observing Recent Foreign Developments upon Bio-medicine、 Marketing Medical Devices、Technology Development Project and the Newest Litigation Trend Concerning the Joint Infringement of Method/Process Patents

1、Chinese REACH has put into shape, how about Taiwan REACH? - A Perspective of Chinese Measures on Environmental Management of New Chemical Substances Taiwan food industry has been struck by the government agency's disclosure that certain unfaithful manufacturers have mixed toxic chemicals into the food additives for the past 30 years, and the chemicals may seriously threaten public health. This event has not only shocked the confidence of the customers to the industry, but also drew public attention on the well-management and the safe use of chemicals. In order to manage the fast advancing and widely applicable chemical substance appropriately, the laws and regulations among the international jurisprudences in recent years tend to regulate unfamiliar chemicals as “new chemical substances” and leverage registration systems to follow their use and import. REACH is one the most successful models which has been implemented by European Union since 2006. China, one of our most important business partners, has also learned from the EU experience and implemented its amended " Measures on Environmental Management of New Chemical Substances" (also known as "Chinese REACH") last year. It is not only a necessity for our industry which has invested or is running a business in China to realize how this new regulation may influence their business as differently , but also for our authority concerned to observe how can our domestic law and regulation may connect to this international trend. Therefore, except for briefing the content of Chinese REACH, this article may also review those existing law and regulations in Taiwan and observe the law making movement taken by our authority. We expect that the comparison and observation in this article may be a reference for our authorities concerned to map out a better environment for new chemical management. 2、The study on Taiwanese businessmen Join the Bid Invitation and Bidding of Science and Technology Project China government invests great funds in their Science and Technology Project management system, containing most of innovated technology. It also creates the great business opportunity for domestic industry. China government builds up a Bid Invitation and Bidding Procedure in the original Science and Technology Project Regime recent years, in order to make the regime become more open and full of transparency. It also improves Regime to become more fairness and efficiency. Taiwan industry may try to apply for those Science and Technology Project, due to this attractive opportunity, but they should understand china's legal system before they really do that. This Article will introduce the "Bid Invitation and Bidding Law of the Peoples Republic of China", and the "Provisional Regulation on Bid Invitation and Bidding of Science and Technology Project", then clarify applied relationship between the "Bid Invitation and Bidding Law of the Peoples Republic of China", and "Government Procurement Law of the Peoples Republic of China". It also analyzes "Bid Invitation and Bidding Procedure", "Administration of Contract Performance Procedure", "Inspection and Acceptance Procedure", and "Protest and Complaint Procedure, providing complete legal observation and opinion for Taiwan industry finally. Keyword Bid Invitation and Bidding Law of the Peoples Republic of China; Government Procurement Law of the Peoples Republic of China; Provisional Regulation on Bid Invitation and Bidding of Science and Technology Project; Applying for Science and Technology Project Regime; Bid Invitation and Bidding Procedure; Administration of Contract Performance Procedure; Inspection and Acceptance Procedure; Protest and Complaint Procedure. 3、Comparing the Decisions of the United States Supreme Court regarding Preempting Marketing Medical Devices and Drugs from State Tort Litigations with the Decision of a Hypothetical Case in Taiwan The investment costs of complying with pertinent laws and regulations for manufacturing, marketing, and profiting from drugs and medical devices (abbreviated as MD) are far higher than the costs necessary for securing a market permit. The usage of MD products contains the risk of harming their users or the patients, who might sue the manufacturer for damages in the court based on tort law. To help reduce the risk of such litigation, the industry should be aware of the laws governing the state tort litigations and the preemption doctrine of the federal laws of the United States. This article collected four critical decisions by the United States Supreme Court to analyze the requirements of federal preemption from the state tort litigations in these cases. The article also analyzed the issues of preemption in our law system in a hypothetical case. These issues include the competing regulatory requirements of the laws and regulations on the drugs and MDs and the Drug Injury Relief Act versus the Civil Code and the Consumer Protection Law. The article concluded: 1. The pre-market-approval of MD in the United States is exempted from the state tort litigations; 2. Brand-name-drug manufacturers must proactively update the drug label regarding severe risks evidenced by the latest findings; 3. Generic-drug manufacturers are exempted from the product liability litigations and not required to comply with the aforementioned brand-name-drug manufacturers' obligation; 4. No preemption issues are involved in these kinds of product liability litigations in our country; 5. The judge of general court is not bound by the approval of marketing of drug and MD; 6. The judge of general court is not bound by the determination and verdict of the Drug Injury Relief Act. 4、Through Computer-Aided Detection Software, Comparing by Discussing and Analyzing the Regulatory Requirements for Marketing Medical Devices in the United States and in Taiwan Computer-Aided Detection (CADe) software systematically assists medical doctors to detect suspicious diseased site(s) inside patients' bodies, and it would help patients receive proper medical treatments as soon as possible. Only few of this type of medical device (MD) have been legally marketed either in the United States of America (USA) or in Taiwan. This is a novel MD, and the rules regulating it are still under development. Thus, it is valuable to investigate and discuss its regulations. To clarify the requirements of legally marketing the MD, this article not only collects and summarizes the latest draft guidance announced by the USA, but also compares and analyzes the similarities and differences between USA and Taiwan, and further explains the logics that USA applies to clarify and qualify CADe for marketing, so that the Department of Health (DOH) in Taiwan could use them as references. Meanwhile, the article collects the related requirements by the Administrative Procedure Act and by the Freedom of Government Information Law of our nation, and makes the following suggestions on MD regulations to the DOH: creating product code in the system of categorization, providing clearer definition of classification, and actively announcing the (abbreviated) marketing route that secures legal permission for each individual product. 5、A Discussion on the Recent Cases Concerning the Joint Infringement of Method/Process Patents in the U.S. and Japan In the era of internet and mobile communication, practices of a method patent concerning innovative service might often involve several entities, and sometimes the method patent can only be infringed jointly. Joint infringement of method/process patents is an issue needed to be addressed by patent law, since it is assumed that a method patent can only be directly infringed by one entity to perform all the steps disclosed in the patent. In the U.S., CAFC has established the "control or direction" standard to address the issue, but the standard has been criticized and it is under revision now. In Japan, there is no clearly-established standard to address the issue of joint infringement, but it seems that the entity that controls and benefits from the joint infringement might be held liable. Based on its discussion about the recent development in the U.S. and Japan, this article attempts to provide some suggestions for inventors of innovative service models to use patents to protect their inventions properly: they should try to avoid describing their inventions in the way of being practiced by multi-entities, they should try to claim both method and system/apparatus inventions, and they should try to predict the potential infringement of their patents in order to address the problem of how to prove the infringement.

TOP