The Status of Taiwan's Regulations Concerning with Access to Biological Resources

Preface

In actual practice, the research and development of biotech medicine, food, and environmental products cannot be done by in-lab researches. This is a unique character of the biotechnology industry. To get the research going, the researchers need to search for and exploit new biological materials and, samples outside the lab. Therefore, the access to and management of biological resources have significant impact on the stimulation and development of national biotech industry.

Ever since the enforcement of Convention on Biological Diversity (CBD) in 1992 by 172 countries, a general principal about conserving biological diversity and using biological resources has been set. According to CBD, States have sovereign rights over their own biological resources. CBD also encourages each State to access to and manage the biological resources conformed with the principals of conservation, sustainability, NOEL environment friendly, and adequate sharing of benefit arising from biological resources. Therefore, issues such as environmental protection and sustainability have become political issues internationally.

If the ABS system for the access to biological resources is designed too strictly, the establishment of the system will make the research and development staffs and related institutions hang back with hesitation both domestically and internationally. Their intention of bioprospecting in the designated country will then be reduced. On the other hand, if the system is designed too loosely, it will not be able to protect the rights of the owner of the resources. As a result, currently, every country holds a cautious attitude in setting up the regulations of managing the access to biological resources.

Currently, many countries and regional international organizations already set up ABS system, such as Andean Community, African Union, Association of Southeast Asia Nations (ASEAN), Australia, South Africa, and India, all are enthusiastic with the establishment of the regulations regarding the access management of biological resources and genetic resources. On the other hand, there are still many countries only use traditional and existing conservation-related regulations to manage the access of biological resources. Since it has been more than 10 years that the regulation of access to biological resources and benefit sharing has been developed in some countries, how is Taiwan's current situation regarding this issue?

Taiwan's Existing Regulations on the Access to Bioloical Resources

In terms of regulations, Taiwan's existing management style of the access to biological resources is similar to that of the US and the EU. It refers to the existing regulations on environmental protection and conservation, and evaluates from the perspective of environmental protection to control and manage the exploitation and application of the related biological resources. These regulations include the Wildlife Conservation Act, theNational Park Law, the Forestry Act, the Cultural Heritage Preservation Act, and the Aboriginal Basic Act. The paragraphs below describe the contents of the acts mentioned that are related to the access to biological resources.

1 、 Wildlife Conservation Act

According to the Wildlife Conservation Act, the Protected Species and the products made of cannot be hunted, traded, owned, imported, exported, raised, bred, and processed unless the number of protected wildlife has exceeded the amount the environment permits, or carry the objectives of academic research and education with the permits of central or regional authorities. As for the hunting of General Wildlife, pre-application and approval is needed with the exception of projects based on the objectives of academic research or education.

In addition, the import and export of the living wildlife and the products of Protected Wildlife are restricted to the condition of being permitted by management authority. With respect to the import and export of living Protected Wildlife, Academic research institutions and colleagues are the only person who can seek for the approval of management authority before they proceed.

2 、 National Park Law

The design and management of Taiwan's national parks are based on the regulations listed in the National Park Law with the purpose of protecting our country's exclusive natural scenery, wildlife and historical spots. Based on the properties and the nature of resources, the national park management structures the preserved area into general control area, playground and resting area, spot of historical interest, special landmark area, and ecological protection area. Ecological protection area refers to the areas where the natural surroundings, creatures, the society they live and propagate are strictly protected only for the research of ecology.

According to the regulation of National Park Law, inside the national park area, it is prohibited to hunt animals, fish, take off flowers or trees, not to mention the behaviours that are prohibited by the management authority. Exceptions are made based on the conditions of preserved areas and for the research purposes. In the general control area or resting area, the national park authority allows fishing or other activities agreed by the authority. However, these activities are prohibited in the preserved area of historical interest, special landmark area, and ecological protection area. To suit special purposes, in the special landmark area or ecological protection area, collection of specimens is allowed subject to the approval of authority. Under the purpose of academic research, better management of public safety, and special management of national park, the Ministry of the Interior will permit the collection of specimen. However, to enter the ecological protection area, one must obtain the permission of authority.

3 、 Forestry Act

To protect the forest resources and to maximize the public welfare and economic effectiveness, some of the properties are classified as forestry land and being managed by authority. Based on the Forestry Act, management authority has to restrict the area of cutting timber and to identify the area or period of restricted digging of greensward, tree roots, and grass roots, based on the condition of the forest. In addition, to maintain the current ecological environment in the forest, and to preserve the diversity of species, identification of natural preserved area is needed inside the forestland. The entrance and exit of human and vehicles are controlled based on the nature of the resources inside the preserve area. Unless obtaining the approval from the management authority, not a single activity of damaging, logging or digging soil, stones, greensward and roots is allowed.

Furthermore, any unauthorized activity of collecting specimen inside the forest recreation area and natural reserve will be fined. Collecting flowers and plants in these areas, or trespassing the natural reserve will also be fined. Only the activities taken by the aborigines to sustain their living or accommodate their customs are not restricted.

4 、 Cultural Heritage Preservation Act

The objectives of setting up the Cultural Heritage Preservation Act are to preserve and apply the cultural resources, to enrich the spiritual lives of citizens, and to add glory to the existing diverse cultures. The Cultural Heritage Preservation Act classifies the natural landscape and scenery as cultural assets. Vistas of Natural Culture refer to the natural areas, landforms, plants and mineral which contain the values of preservation. It can be further grouped into natural preserved area and natural monuments. Since the natural monuments include the unusual plants and mineral, it is connected to the management of biological resources.

According to the Cultural Heritage Preservation Act, unless approved by the management authority, it is prohibited to collect, log, destroy the plants or bio resources classified as natural monuments or trespass into the area of natural preserve. For the purposes of academic research, or for the memorial ceremony of aboriginal custom, research institute and the aborigines can collect the natural monuments without the approval of authority.

5 、 Aboriginal Basic Act

To protect the basic rights of the aborigines, and to sustain and develop the aboriginal society, the Aboriginal Basic Act was designed and enacted. The government not only admits the aborigine's rights in lands and natural resources, but also permits the non-profit behaviour such as hunting of wildlife, colleting of wild plants and fungi for the objective of complying with traditional culture, ceremony or private uses.

In addition, the Aboriginal Basic Act provides the requirement of Prior Informed Consent (PIC) to require government or private individual to inform the aborigines before they proceed with land development, resource exploitation, ecological preservation, and academic research in the land where the aborigines live. They need to consult and obtain the aborigines' agreement or participation, and to share the related interests derived from this project. In the case of restricting the aborigine's right of the use of land or natural resources by law, the government,shall consult with the aborigines or the tribe and reach the agreement.

When the government wish to design and establish national park, national scenic area, forestry area, ecological protection area, recreational area, or other resource management authorities, the government should obtain the agreement from the local aborigines and to build up the co-management mechanism.

※The Status of Taiwan's Regulations Concerning with Access to Biological Resources,STLI, https://stli.iii.org.tw/en/article-detail.aspx?d=6139&i=168&no=105&tp=2 (Date:2025/07/06)
Quote this paper
You may be interested
Research on Taiwan’s Policies of Innovative Industry Development in Recent Years (2015-2016)

Research on Taiwan’s Policies of Innovative Industry Development in Recent Years (2015-2016) 1. “Five plus Two” Innovative Industries Policy   On June 15, 2016, Premier Lin Chuan met with a group of prominent business leaders to talk about a government project on five innovative industries, which aim to drive the next generation of businesses in R.O.C.. Subsequently the program was expanded to include “new agriculture” and the “circular economy” as the “+2.” The program was then broadened even further to include the Digital Economy and Cultural Innovation, with even Semiconductors and IC Design included, although the name of the policy remains 5+2. Speaking at the Third Wednesday Club in Taipei, Premier Lin said the industries require more investment to drive the next generation of industry growth momentum in R.O.C., create high-quality jobs, and upgrade the industrial competitiveness. Executive Yuan has selected the five innovative industries of Asia Silicon Valley, smart machinery, green energy, biotech & pharmaceutical industry, and national defense, which will be the core for pushing forward the next-generation industrial growth and improve overall environment by creating a cluster effect that links local and global industries, while simultaneously raising wages and stimulating employment.   Premier Lin said, regarding industrial competitiveness and investment issues the lackluster economy has stifled investment opportunities, and with limited government budgets, the private sector must play the larger role in investments. Regarding the “Five major Innovative Industries” project, Premier Lin said the National Development Council is currently drafting long-term plan to attract talent, create a thriving working environment, and infuse companies with more innovation, entrepreneurship and young workers. In addition, R.O.C. must also cultivate a strong software industry, without which it would be difficult to build a highly intelligent infrastructure.   The National Development Council said the program possess both the capacity of domestic demand and local characteristics, as the core for pushing forward the next-generation industrial growth. The government aims to promote a seamless synergy of investment, technology, and the talent, in order to develop innovative industrial clusters for furthering global linkage and nurturing international enterprises. In the meantime, the government also aims at achieving the enhancement of technology levels, balanced regional development, as well as realizing the benefits of job creation. 2. The Asia Silicon Valley Development Plan   In September 2016 the government approved the Asia Silicon Valley Development Plan, which connect Taiwan to global tech clusters and create new industries for the next generation. By harnessing advanced technological research and development results from around the world, the plan hopes to promote innovation and R&D for devices and applications of the internet of things (IoT), and upgrade Taiwan’s startup and entrepreneurship ecosystem.   The four implementation strategies are as follows:   (1) Building a comprehensive ecosystem to support innovation and entrepreneurship   (2) Connect with international research and development capabilities   (3) Create an IoT value chain   (4) Construct diversified test beds for smart products and services by establishing a quality internet environment   Taiwan’s first wave of industrial development was driven by continuous technological innovation, and the wave that followed saw the information industry become a major source of economic growth. 3. Global Hub for Smart Machinery   On July 21, 2016, Premier Lin Chuan said at a Cabinet meeting, the government aims to forge Taiwan into a global manufacturing hub for intelligent machinery and high-end equipment parts. Upgrading from precision machinery to intelligent machinery is the main goal of putting intelligent machinery industry into focal execution area expecting to create jobs and to maximize the production of production line as well as to forge central Taiwan into a global manufacturing hub for smart machinery. The Ministry of Economic draws up the Intelligent Machinery Promotion Program to establish the applications of the technology and capacity of services that fit the demand of the market. The program embodies two parts. The first is to accelerate the industrialization of intelligent machinery for building an ecosystem. The second is to improve intelligentization by means of introducing the intelligent machinery into the industries.   The execution policy of the Intelligent Machinery Promotion Program is to integrate the intelligent functions such as malfunctions predictions, accuracy compensation, and automatic parameter setting into the machinery industry so as to have the ability to render the whole solutions to the problem. Simultaneously, the program employs three strategies, which are connecting with the local industries, connecting with the future, and connecting with the world, to develop the mentioned vision and objectives. Especially, the way to execute the strategy of connecting with the local industries consists of integrating the capabilities of industry, research organization and the government. At the meantime, the government will encourage the applications of smart vehicles and unmanned aerial vehicles and train the talents as well. The thinking of connecting with the future lies in the goal of deepening the technologies, establishing systematic solutions, and providing a testing areas, which focus on the related applications such as aerospace, advanced semiconductor, smart transportation, green vehicles, energy industry, whole solutions between factories, intelligent man-machine coordination, and robots of machine vision combined with intelligent machinery applications. The government would strengthen the cross-cutting cooperation to develop machines for aerospace and integrate the system of industrial division to form a cluster in order to create Taiwanese IoT technology. Eventually, Taiwan will be able to connect with the world, enhance international cooperation, expand export trade and push industry moving toward the age of information and digital economy and break the edge of industry technology to make the industry feel the goodwill of the government. 4. Green energy innovations   The government’s “five plus two” innovative industries program includes a green energy industrial innovation plan passed October 27, 2016 that will focus on Taiwan’s green needs, spur extensive investments from within and outside the country, and increase quality employment opportunities while supporting the growth of green energy technologies and businesses.   The government is developing the Shalun Green Energy Science City. The hub’s core in Shalun will house a green energy technology research center as well as a demo site, providing facilities to develop research and development (R&D) capabilities and conduct the requisite certification and demonstration procedures. The joint research center for green energy technologies will integrate the efforts of domestic academic institutions, research institutes, state-run enterprises and industry to develop green energy technologies, focusing on four major functions: creating, conserving and storing energy, as well as system integration. Development strategies include systems integration and finding better ways to conserve, generate and store energy by promoting green energy infrastructure, expanding renewable energy capabilities and cooperating with large international firms.   The emergence of the green economy has prompted the government to build infrastructure that will lay the foundation for Taiwan’s green energy sector, transform the nation into a nuclear-free society, and spur industrial innovation. For innovative technology industries, green energy industries can drive domestic economic development by attracting more venture capital and creating more employment opportunities. 5. Biomedical Industry Innovation Program   To facilitate development of Taiwan’s biomedical industry, the government proposed a “biomedical industrial innovation promotion program” on November 10, 2016 to serve as the nation’s new blueprint for innovative biomedical research and development (R&D). To facilitate development of the biomedical industry, the government proposed a “biomedical industrial innovation promotion program”. The program centered on the theme of “local, global and future links,” “the biomedical industrial innovation promotion program” includes four action plans:   (1) Build a comprehensive ecosystem   To address a rapidly ageing global population, Taiwan will enhance the biomedical industry’s capacity for innovation by focusing on talent, capital, topic selection, intellectual property, laws and regulations, and resources.   (2) Integrate innovative business clusters   Established by the Ministry of Science and Technology and based in Hsinchu Biomedical Science Park, the center will serve as a government think tank on related issues. It is also tasked with initiating and advancing exchanges among local and foreign experts, overseeing project implementation, promoting investment and recruiting talents. Equally important, it will play a central role in integrating resources from other biomedical industry clusters around the country, including Nangang Software Park in Taipei City, Central Taiwan Science Park in Taichung City and Southern Science Park in Tainan City.   (3) Connect global market resources   Building on Taiwan’s advantages, promote M&A and strategic alliances, and employ buyout funds and syndicated loans to purchase high-potential small and medium-sized international pharmaceutical companies, medical supply companies, distributors and service providers. Use modern mosquito-borne disease control strategies as the foundation of diplomatic cooperation, and promote the development of Taiwan’s public health care and medical services in Southeast Asian countries.   (4) Promote specialized key industries   Promote niche precision medical services, foster clusters of world-class specialty clinics, and develop industries in the health and wellness sectors. 6. DIGITAL NATION AND INNOVATIVE ECONOMIC DEVELOPMENT PLAN    On November 24, 2016, the Executive Yuan promote the Digital Nation and Innovative Economic Development Plan (2017-2025) (DIGI+ program), the plan’s main goals for 2025 are to grow R.O.C.’s digital economy to NT $ 6.5 trillion (US$205.9 billion), increase the digital lifestyle services penetration rate to 80 percent, speed up broadband connections to 2 Gbps, ensure citizens’ basic rights to have 25 Mbps broadband access, and put R.O.C. among the top 10 information technology nations worldwide.    In addition to the industrial economy, the program can jump off bottlenecks in the past industrial development, and promote the current Internet of things, intelligent machinery, green energy, medical care and other key national industries, but also attaches great importance to strengthening the digital infrastructure construction, the development of equal active, as well as the creation of a service-oriented digital government. It is also hoped that through the construction of a sustainable and intelligent urban and rural area, the quality of life will be improved and the people will enjoy a wealthy and healthy life. Over the next 8 years, the government will spend more than NT $ 150 billion.   The plan contains several important development strategies: DIGI+Infrastructure: Build infrastructure conducive to digital innovation. DIGI+Talent: Cultivate digital innovation talent. DIGI+Industry: Support cross-industry transformation through digital innovation. DIGI+Rights: Make R.O.C. an advanced society that respects digital rights and supports open online communities. DIGI+Cities: Build smart cities through cooperation among central and local governments and the industrial, academic and research sectors. DIGI+Globalization: Boost R.O.C.’s standing in the global digital service economy.   The program aims to build a favorable environment for digital innovation and to create a friendly legal environment to complete the draft amendments to the Digital Communications Law and the Telecommunications Act as soon as possible, foster cross-domain digital talents and develop advanced digital technologies, To create a digital economy, digital government, network society, smart urban and rural and other national innovation ecological environment in order to achieve "the development of active network society, promote high value innovation economy, open up rich countries of the policy vision.    In order to achieve the overall effectiveness of the DIGI + program, interdisciplinary, inter-ministerial, inter-departmental and inter-departmental efforts will be required to collaborate with the newly launched Digital National Innovation Economy (DIGI +) Promotion Team. 7. “NEW AGRICULTURE” PROMOTION PROJECT    At a Cabinet meeting On December 08, 2016, Premier Lin Chuan underscored the importance of a new agricultural paradigm for Taiwan’s economic development, adding that new agriculture is an integral part of the “five plus two” industrial innovation projects proposed by President Tsai Ing-wen. The “new agriculture” promotion project uses innovation technology to bring value to agricultural, and build new agricultural paradigm, agricultural safety systems and promote agricultural marketing. This project also takes resources recycling and environmental sustainability into consideration to promote agricultural transformation, and build a robust new agricultural system.   This agricultural project is expected to increase food self-sufficiency rate to 40%, level up agricultural industry value by NT$43.4 billion, create 370,000 jobs and increase portion of total agricultural exports to new overseas markets to 57% by 2020.   This project contains three aspects:   First is “building new agricultural paradigm”: to protect farmers, agricultural development and ensure sustainability of the environment.   Second is “building agricultural safety systems”: Ensuring product safety and quality, and building a certification system which can be trust by the consumers and is consistent with international standards.   Last but not least is “leveling up agricultural marketing and promotions”: enhancing promotion, making the agricultural industry become profitable and sustainable.   Council of Agriculture’s initiatives also proposed 10 policies to leverage agricultural industry, not only just use the passive subsidies measure of the past. These policies including promoting environmentally friendly farming practices; giving farmers that are beneficial(green) to the land payments; stabilizing farmers’ incomes; increasing the competitiveness of the livestock and poultry industries; using agricultural resources sustainably; ensuring the safety of agricultural products; developing technological innovation; leveling up food security; increasing diversification of domestic and external marketing channels; and increasing agriculture industry added value.    In this statutes report, Council of Agriculture said this project will accelerate reforms, create new agricultural models and safety systems, but also build a new sustainable paradigm of agricultural. Premier Lin Chuan also backed this “five plus two innovative industries” program and “new agriculture” project, and asked Council of Agriculture to reviewing the possible legal changes or amendment that may help to enhance the transformation of agricultural sector.

Draft of AI Product and System Evaluation Guidelines Released by the Administration for Digital Industries to Enhance AI Governance

Draft of AI Product and System Evaluation Guidelines Released by the Administration for Digital Industries to Enhance AI Governance 2024/08/15 I. AI Taiwan Action Plan 2.0 In 2018, the Executive Yuan launched the “AI Taiwan Action Plan” to ensure that the country keeps pace with AI developments. This strategic initiative focuses on attracting top talent, advancing research and development, and integrating AI into critical sectors such as smart manufacturing and healthcare. The action plan has sparked growing discussion on AI regulation. Through these efforts, Taiwan aims to position itself as a frontrunner in the global smart technology landscape. Later in 2023, the Executive Yuan updated the action plan, releasing “AI Taiwan Action Plan 2.0” to further strengthen AI development. “AI Taiwan Action Plan 2.0” outlines five main pillars: 1. Talent Development: Enhancing the quality and quantity of AI expertise, while improving public AI literacy through targeted education and training initiatives. 2. Technological and Industrial Advancement: Focusing on critical AI technologies and applications to foster industrial growth; and creating the Trustworthy AI Dialogue Engine (TAIDE) that communicates in Traditional Chinese. 3. Enhancing work environments: Establishing robust AI governance infrastructure to facilitate industry and governmental regulation, and to foster compliance with international standards. 4. International Collaboration: Expanding Taiwan's role in international AI forums, such as the Global Partnership on AI, to collaborate on developing trustworthy AI practices. 5. Societal and Humanitarian Engagement: Utilizing AI to tackle pressing societal challenges such as labor shortages, an aging population, and environmental sustainability. II. AI Product and System Evaluation Guidelines: A Risk-based Approach to AI Governance To support infrastructure, in March 2024, the Administration for Digital Industries issued the draft AI Product and System Evaluation Guidelines. The Guidelines are intended to serve as a reference for industry when developing and using AI products and systems, thus laying a crucial foundation for advancing AI-related policies in Taiwan. The Guidelines outline several potential risks associated with AI: 1. Third-Party Software and Hardware: While third-party software, hardware, and datasets can accelerate development, they may also introduce risks into AI products and systems. Therefore, effective risk management policies are crucial. 2. System Transparency: The lack of transparency in AI products and systems makes risk assessment relatively challenging. Inadequate transparency in AI models and datasets also pose risks for development and deployment. 3. Differences in Risk Perception: Developers of AI products and systems may overlook risks specific to different application scenarios. Moreover, risks may gradually emerge as the product or system is used and trained over time. 4. Application Domain Risks: Variations between testing results and actual operational performance can lead to differing risk assessments for evaluated products and systems. 5. Deviation from Human Behavioral Norms: If AI products and systems behave unexpectedly compared to human operations, this can indicate a drift in the product, system, or model, thereby introducing risks. The Guidelines also specify that businesses have to categorize risks when developing or using AI products and systems, and manage them in accordance with these classifications. In alignment with the EU AI Act, risks are classified into four levels: unacceptable, high, limited, and minimal. 1. Unacceptable Risk: If AI systems used by public or private entities provide social scoring of individuals, this could lead to discriminatory outcomes and the exclusion of certain groups. Furthermore, if AI systems are employed to manipulate the cognitive behavior of individuals or vulnerable populations, causing physical or psychological harm, such systems are deemed unacceptable and prohibited. 2. High risk: AI systems are classified as high-risk in several situations. These include applications used in critical infrastructure, such as transportation, where there is potential risk to citizens' safety and health. These situations also encompass AI systems involved in educational or vocational training (such as exam scoring), which can determine access to education or professional paths. AI used as safety-critical product components, such as robot-assisted surgery, also falls into this category. In the employment sector, AI systems used for managing recruitment processes, including CV-sorting software, are considered high-risk. Essential private and public services, such as credit scoring systems that impact loan eligibility, also fall under high-risk. AI used in law enforcement in ways that it may affect fundamental rights, such as evaluating the reliability of evidence, is also included. AI systems involved in migration, asylum, and border control, such as automated visa application examinations, are categorized as high-risk. Finally, AI solutions used in the administration of justice and democratic processes, such as court ruling searches, are also classified as high-risk. If an AI system is classified as high risk, it must be evaluated across ten criteria—Safety, Explainability, Resilience, Fairness, Accuracy, Transparency, Accountability, Reliability, Privacy, and Security—to ensure the AI system’s quality. 3. Limited risk: When an AI product or system is classified as having limited risk, it is up to the enterprise to determine whether an evaluation is required. The Guidelines also introduce specific transparency obligations to ensure that humans are informed when necessary, thus fostering trust. For instance, when using AI systems such as chatbots or systems for generating deepfake content, humans must be made aware that they are interacting with a machine so they can take an informed decision to continue or step back. 4. Minimal or no risk: The Guidelines allow the free use of minimal-risk AI. This includes applications such as AI-enabled video games and spam filters. Ⅲ. Conclusion The AI Product and System Evaluation Guidelines represent a significant step forward in establishing a robust, risk-based framework for AI governance in Taiwan. By aligning with international standards like the EU AI Act, these Guidelines ensure that AI products and systems are rigorously assessed and categorized into four distinct risk levels: unacceptable, high, limited, and minimal. This structured approach allows businesses to manage AI-related risks more effectively, ensuring that systems are safe, transparent, and accountable. The emphasis on evaluating AI systems across ten critical criteria—including safety, explainability, and fairness—reflects a comprehensive strategy to mitigate potential risks. This proactive approach not only safeguards the public but also fosters trust in AI technologies. By setting clear expectations and responsibilities for businesses, the Guidelines promote responsible development and deployment of AI, ultimately contributing to Taiwan's goal of becoming a leader in the global AI landscape.

Executive Yuan Promotes Free Economic Demonstration Zone

I.Background To promote more liberal and internationalized development of Taiwan economy, Premier of Executive Yuan approved the “Free Economic Demonstration Zone Plan” on April 26, 2013. Meanwhile, an Executive Yuan Working Group on Promotion of Economic Demonstration Zone is set up to accelerate the mapping out of the promotion programs as well as detailed action plans. The first phase of the Free Economic Demonstration Zone is to be officially initiated in July. According to the “Free Economic Demonstration Zone Plan”, the relevant laws and provisions regarding the flowing of human and financial capitals, and of logistics, will be loosen up to a great degree, based on the core ideas of liberalization, internationalization, and forwardness. Other related measures such as offering of lands and taxation would also be made, in order to attract capitals from both the inside and outside of the country. In addition, the Free Economic Demonstration Zone will first develop economic activities such as intelligent computing, international medicine services, value-added agriculture and cooperation among industries, to accelerate the transformation of the industrial structure of Taiwan. In order to construe an excellent environment for business of full liberalization and internationalization, the promotion strategies will be focused on “break-through of legal frameworks and innovations of management mechanisms”. II.Content of the Plan To accelerate the promotion process, the Free Economic Demonstration Zone will be conducted in two phases. The first phase is centered on the existing free trade port areas, including five ports and one airport, incorporated with the nature of “being inside the country border but outside the tariff zone”. All the industrial parks in the near counties and cities will also be integrated. The promotion will be set out simultaneously in the north, middle and south of Taiwan. The effects of the promotion are expected to be magnified by fully utilizing the resources and the unique characters of industries of each region. Moreover, the promulgation of a special legislation on the Free Economic Demonstration Zone would be facilitated in the future. After this special legislation is passed, the set-ups of demonstration zones can be applied by authorities either of central or of local government and the related promotion works of the second phase will be unfolded immediately. According to the Executive Yuan, the Free Economic Demonstration Zone will be beneficial in terms of creating positive conditions for Taiwan to participate in regional trade organizations and attract both local and foreign investment, injecting new movement into the economic growth of Taiwan. III.Recent Development In addition, on August 8, 2013, relevant discussions on “Furtherance Plan for Free Economic Demonstration Zone Phase One” are further unfolded in the Executive Yuan conference. In addition, the Premier also indicates, that the furtherance of the Free Economic Demonstration Zone (hereafter: FEDZ) is divided into two phases. The first phase starts from the moment that the Plan is approved till the related special legislation is passed and promulgated. In this phase, the relevant tasks can be achieved through the ways of promulgation of administrative orders. On the other hand, the tasks concerning taxation benefits and other parts that involve legislation will not able to be initiated till the second phase of the Plan. For those tasks, the Council for Economic Planning and Development is asked to complete the drafting of this special legislation and related procedures for registering it into the Executive Yuan, together with the Ministry of Economic Affairs and other concerned agencies, in the hope that the related legislation works of the Executive Yuan can be completed before the end of this year. In respect of “Furtherance Plan for Free Economic Demonstration Zone Phase One”, Premier Jiang further points out, that FEDZ is a model incorporates the concept of “being inside the country border but outside the tariff zone” and the idea of “combining the stores upfront and the factories behind, outsourcing manufactures”. In this way, the hinterland of a port can be expended and magnified effects to be achieved through using the resources provided by the factory in behind. Under this pattern, the expansion effects that cities and counties such as New Taipei City and Changhua Country fight for, can be further extended by this concept of “factories in the back”. As for Port of Anping, over which Tainan City government has proactively fought for, can be listed as a demonstration zone once the Executive Yuan approved it as free trade port zone. In the future, other places that are with forward-looking industry and suitable can still be enlisted. Premier Jiang further expresses that, there are four demonstration industries in the first phase, including intelligent computing, international medicine services, value-added agriculture and cooperation among industries. Yet, he also points out that the demonstration of liberalized economy is a concept of “4+N”. It means that the demonstration will not be limited to the scope of these four industries. Other industries that match up with the idea of liberalization, internationalization and foresight can all be incorporated into FEDZ through continuing examination. Moreover, Premier Jiang later mentions on August 14th, that FEDZ is a crucial task for the government at this moment. He thus requests the Ministry of Economic Affairs, Ministry of Transportation and Communications, Ministry of Health and Welfare, and the Council of Agriculture, to enhance the training and service quality of staffers of the single service window of furtherance of FEDZ. Moreover, Premier Jiang additionally indicated in November, that the scope of the FEDZ will include Pingtung Agricultural Biotechnology Park and Kaohsiung Free Trade Port Area. The combination of the two will facilitate adding value to the agriculture in Taiwan and put momentum into quality agriculture, making the high-quality agricultural products of our country being sold to all over the world with swift logistic services. Premier Jiang also mentioned, that in order to avoid Taiwan being marginalized amid regional integrations of global economies, the government is facilitating industries of potentials by proactively promote the FEDZ. The current approach is to expend the original free trade port area with legislative bases, creating the demonstration zones of free economy by combing original establishments such as Pingtung Agricultural Biotechnology Park. If this approach and system is proved feasible, the next step would be promoting it to island-wide, making the whole nation open-up. IV.Conclusion In the past decade, the economic development in Taiwan, compared to neighboring economic zones such as Hong Kong, Korean or Singapore, was indeed stagnant. It is thus a positive move for the government to put great efforts in promoting FEDZ, in the hope that the liberalization and internationalization of the economy of this country can therefore be significantly improved. Yet, some commentators are of slightly more skeptical opinions, reminding that in terms of the tax relaxation in the Plan, similar approach was already taken by the government before, which did not lead to the expected outcome. In sum, it still remains as a continuing task for us and for the administration as well, to ponder on how Taiwan can find out its own unique strength in the face of global competition. How we can attract more international partners, to create mutual economic benefits. The FEDZ is undoubtedly a first step. Nevertheless, challenges are still ahead of the government, as to how to take many more steps in the future, in order to make Taiwan to march on the stage of the world again.

Impact of Government Organizational Reform to Research Legal System and Response Thereto (2) – Observation of the Swiss Research Innovation System

Impact of Government Organizational Reform to Research Legal System and Response Thereto (2) – Observation of the Swiss Research Innovation System I. Foreword   Switzerland is a landlocked country situated in Central Europe, spanning an area of 41,000 km2, where the Alps occupy 60% of the territory, while it owns little cultivated land and poor natural resources. In 2011, its population was about 7,950,000 persons[1]. Since the Swiss Federal was founded, it has been adhering to a diplomatic policy claiming neutrality and peace, and therefore, it is one of the safest and most stable countries in the world. Switzerland is famous for its high-quality education and high-level technological development and is very competitive in biomedicine, chemical engineering, electronics and metal industries in the international market. As a small country with poor resources, the Swiss have learnt to drive their economic and social development through education, R&D and innovation a very long time ago. Some renowned enterprises, including Nestle, Novartis and Roche, are all based in Switzerland. Meanwhile, a lot of creative small-sized and medium-sized enterprises based in Switzerland are dedicated to supporting the export-orientation economy in Switzerland.   Switzerland has the strongest economic strength and plentiful innovation energy. Its patent applications, publication of essay, frequencies of quotation and private enterprises’ innovation performance are remarkable all over the world. According to the Global Competitiveness Report released by the World Economic Forum (WEF), Switzerland has ranked first among the most competitive countries in the world for four years consecutively since 2009[2]. Meanwhile, according to the Global Innovation Index (GII) released by INSEAD and the World Intellectual Property Organization (WIPO) jointly, Switzerland has also ranked first in 2011 and 2012 consecutively[3]. Obviously, Switzerland has led the other countries in the world in innovation development and economic strength. Therefore, when studying the R&D incentives and boosting the industrial innovation, we might benefit from the experience of Switzerland to help boost the relevant mechanism in Taiwan.   Taiwan’s government organization reform has been launched officially and boosted step by step since 2012. In the future, the National Science Council will be reformed into the “Ministry of Science and Technology”, and the Ministry of Economic Affairs into the “Ministry of Economy and Energy”, and the Department of Industrial Development into the “Department of Industry and Technology”. Therefore, Taiwan’s technology administrative system will be changed materially. Under the new government organizational framework, how Taiwan’s technology R&D and industrial innovation system divide work and coordinate operations to boost the continuous economic growth in Taiwan will be the first priority without doubt. Support of innovation policies is critical to promotion of continuous economic growth. The Swiss Government supports technological research and innovation via various organizations and institutions effectively. In recent years, it has achieved outstanding performance in economy, education and innovation. Therefore, we herein study the functions and orientation of the competent authorities dedicated to boosting research and innovation in Switzerland, and observe its policies and legal system applied to boost the national R&D in order to provide the reference for the functions and orientation of the competent authorities dedicated to boosting R&D and industrial innovation in Taiwan. II. Overview of Swiss Federal Technology Laws and Technology Administrative System   Swiss national administrative organization is subject to the council system. The Swiss Federal Council is the national supreme administrative authority, consisting of 7 members elected from the Federal Assembly and dedicated to governing a Federal Government department respectively. Switzerland is a federal country consisting of various cantons that have their own constitutions, councils and governments, respectively, entitled to a high degree of independence.   Article 64 of the Swiss Federal Constitution[4] requires that the federal government support research and innovation. The “Research and Innovation Promotion Act” (RIPA)[5] is dedicated to fulfilling the requirements provided in Article 64 of the Constitution. Article 1 of the RIPA[6] expressly states that the Act is enacted for the following three purposes: 1. Promoting the scientific research and science-based innovation and supporting evaluation, promotion and utilization of research results; 2. Overseeing the cooperation between research institutions, and intervening when necessary; 3. Ensuring that the government funding in research and innovation is utilized effectively. Article 4 of the RIPA provides that the Act shall apply to the research institutions dedicated to innovation R&D and higher education institutions which accept the government funding, and may serve to be the merit for establishment of various institutions dedicated to boosting scientific research, e.g., the National Science Foundation and Commission of Technology & Innovation (CTI). Meanwhile, the Act also provides detailed requirements about the method, mode and restriction of the government funding.   According to the RIPA amended in 2011, the Swiss Federal Government’s responsibility for promoting innovation policies has been extended from “promotion of technology R&D” to “unification of education, research and innovation management”, making the Swiss national industrial innovation framework more well-founded and consistent[8] . Therefore, upon the government organization reform of Switzerland in 2013, most of the competent authorities dedicated to technology in Swiss have been consolidated into the Federal Department of Economic Affairs, Education and Research.   Under the framework, the Swiss Federal Government assigned higher education, job training, basic scientific research and innovation to the State Secretariat for Education, Research and Innovation (SERI), while the Commission of Technology & Innovation (CTI) was responsible for boosting the R&D of application scientific technology and industrial technology and cooperation between the industries and academy. The two authorities are directly subordinate to the Federal Department of Economic Affairs, Education and Research (EAER). The Swiss Science and Technology Council (SSTC), subordinate to the SERI is an advisory entity dedicated to Swiss technology policies and responsible for providing the Swiss Federal Government and canton governments with the advice and suggestion on scientific, education and technology innovation policies. The Swiss National Science Foundation (SNSF) is an entity dedicated to boosting the basic scientific R&D, known as the two major funding entities together with CTI for Swiss technology R&D. The organizations, duties, functions and operations of certain important entities in the Swiss innovation system are introduced as following. Date source: Swiss Federal Department of Economic Affairs, Education and Research official website Fig. 1 Swiss Innovation Framework Dedicated to Boosting Industries-Swiss Federal Economic, Education and Research Organizational Chart 1. State Secretariat of Education, Research and Innovation (SERI)   SERI is subordinate to the Department of Economic Affairs, Education and Research, and is a department of the Swiss Federal Government dedicated to managing research and innovation. Upon enforcement of the new governmental organization act as of January 1, 2013, SERI was established after the merger of the State Secretariat for Education and Research, initially subordinate to Ministry of Interior, and the Federal Office for Professional Education and Technology (OEPT), initially subordinated to Ministry of Economic Affairs. For the time being, it governs the education, research and innovation (ERI). The transformation not only integrated the management of Swiss innovation system but also unified the orientations toward which the research and innovation policy should be boosted.   SERI’s core missions include “enactment of national technology policies”, “coordination of research activities conducted by higher education institutions, ETH, and other entities of the Federal Government in charge of various areas as energy, environment, traffic and health, and integration of research activities conducted by various government entities and allocation of education, research and innovation resources. Its functions also extend to funding the Swiss National Science Foundation (SNSF) to enable SNSF to subsidize the basic scientific research. Meanwhile, the international cooperation projects for promotion of or participation in research & innovation activities are also handled by SERI to ensure that Switzerland maintains its innovation strength in Europe and the world.   The Swiss Science and Technology Council (SSTC) is subordinate to SERI, and also the advisory unit dedicated to Swiss technology policies, according to Article 5a of RIPA[9]. The SSTC is responsible for providing the Swiss Federal Government and canton governments with advice and suggestion about science, education and innovation policies. It consists of the members elected from the Swiss Federal Council, and a chairman is elected among the members. 2. Swiss National Science Foundation (SNSF)   The Swiss National Science Foundation (SNSF) is one of the most important institutions dedicated to funding research, responsible for promoting the academic research related to basic science. It supports about 8,500 scientists each year. Its core missions cover funding as incentives for basic scientific research. It grants more than CHF70 million each year. Nevertheless, the application science R&D, in principle, does not fall in the scope of funding by the SNSF. The Foundation allocates the public research fund under the competitive funding system and thereby maintains its irreplaceable identity, contributing to continuous output of high quality in Switzerland.   With the support from the Swiss Federal Government, the SNSF was established in 1952. In order to ensure independence of research, it was planned as a private institution when it was established[10]. Though the funding is provided by SERI, the SNSF still has a high degree of independence when performing its functions. The R&D funding granted by the SNSF may be categorized into the funding to free basic research, specific theme-oriented research, and international cooperative technology R&D, and the free basic research is granted the largest funding. The SNSF consists of Foundation Council, National Research Council and Research Commission[11]. Data source: prepared by the Study Fig. 2  Swiss National Science Foundation Organizational Chart (1) Foundation Council   The Foundation Council is the supreme body of the SNSF[12], which is primarily responsible for making important decisions, deciding the role to be played by the SNSF in the Swiss research system, and ensuring SNSF’s compliance with the purpose for which it was founded. The Foundation Council consists of the members elected from the representatives from important research institutions, universities and industries in Swiss, as well as the government representatives nominated by the Swiss Federal Council. According to the articles of association of the SNSF[13], each member’s term of office should be 4 years, and the members shall be no more than 50 persons. The Foundation Council also governs the Executive Committee of the Foundation Council consisting of 15 Foundation members. The Committee carries out the mission including selection of National Research Council members and review of the Foundation budget. (2) National Research Council   The National Research Council is responsible for reviewing the applications for funding and deciding whether the funding should be granted. It consists of no more than 100 members, mostly researchers in universities and categorized, in four groups by major[14], namely, 1. Humanities and Social Sciences; 2. Math, Natural Science and Engineering; 3. Biology and Medical Science; and 4. National Research Programs (NRPs)and National Centers of Competence in Research (NCCRs). The NRPs and NCCRs are both limited to specific theme-oriented research plans. The funding will continue for 4~5years, amounting to CHF5 million~CHF20 million[15]. The specific theme-oriented research is applicable to non-academic entities, aiming at knowledge and technology transfer, and promotion and application of research results. The four groups evaluate and review the applications and authorize the funding amount.   Meanwhile, the representative members from each group form the Presiding Board dedicated to supervising and coordinating the operations of the National Research Council, and advising the Foundation Council about scientific policies, reviewing defined funding policies, funding model and funding plan, and allocating funding by major. (3) Research Commissions   Research Commissions are established in various higher education research institutions. They serve as the contact bridge between higher education academic institutions and the SNSF. The research commission of a university is responsible for evaluating the application submitted by any researcher in the university in terms of the school conditions, e.g., the school’s basic research facilities and human resource policies, and providing advice in the process of application. Meanwhile, in order to encourage young scholars to attend research activities, the research committee may grant scholarships to PhD students and post-doctor research[16]. ~to be continued~ [1] SWISS FEDERAL STATISTICS OFFICE, Switzerland's population 2011 (2012), http://www.bfs.admin.ch/bfs/portal/en/index/news/publikationen.Document.163772.pdf (last visited Jun. 1, 2013). [2] WORLD ECONOMIC FORUM [WEF], The Global Competiveness Report 2012-2013 (2012), http://www3.weforum.org/docs/WEF_GlobalCompetitivenessReport_2012-13.pdf (last visited Jun. 1, 2013); WEF, The Global Competiveness Report 2011-2012 (2011), http://www3.weforum.org/docs/WEF_GCR_Report_2011-12.pdf (last visited Jun. 1, 2013); WEF, The Global Competiveness Report 2010-2011 (2010), http://www3.weforum.org/docs/WEF_GlobalCompetitivenessReport_2010-11.pdf (last visited Jun. 1, 2013); WEF, The Global Competiveness Report 2009-2010 (2009),. http://www3.weforum.org/docs/WEF_GlobalCompetitivenessReport_2009-10.pdf (last visited Jun. 1, 2013). [3] INSEAD, The Global Innovation Index 2012 Report (2012), http://www.globalinnovationindex.org/gii/GII%202012%20Report.pdf (last visited Jun. 1, 2013); INSEAD, The Global Innovation Index 2011 Report (2011), http://www.wipo.int/freepublications/en/economics/gii/gii_2011.pdf (last visited Jun. 1, 2013). [4] SR 101 Art. 64: “Der Bund fördert die wissenschaftliche Forschung und die Innovation.” [5] Forschungs- und Innovationsförderungsgesetz, vom 7. Oktober 1983 (Stand am 1. Januar 2013). For the full text, please see www.admin.ch/ch/d/sr/4/420.1.de.pdf (last visited Jun. 3, 2013). [6] Id. [7] Id. [8] CTI, CTI Multi-year Program 2013-2016 7(2012), available at http://www.kti.admin.ch/?lang=en&download=NHzLpZeg7t,lnp6I0NTU042l2Z6ln1ad1IZn4Z2qZpnO2Yuq2Z6gpJCDeYR,hGym162epYbg2c_JjKbNoKSn6A-- (last visited Jun. 3, 2013). [9] Supra note 5. [10] Swiss National Science Foundation, http://www.snf.ch/E/about-us/organisation/Pages/default.aspx (last visited Jun. 3, 2013). [11] Id. [12] Foundation Council, Swiss National Science Foundation, http://www.snf.ch/E/about-us/organisation/Pages/foundationcouncil.aspx (last visited Jun. 3, 2013). [13] See Statutes of Swiss National Science Foundation Art.8 & Art. 9, available at http://www.snf.ch/SiteCollectionDocuments/statuten_08_e.pdf (last visited Jun. 3, 2013). [14] National Research Council, Swiss National Science Foundation, http://www.snf.ch/E/about-us/organisation/researchcouncil/Pages/default.aspx (last visted Jun.3, 2013). [15] Theres Paulsen, VISION RD4SD Country Case Study Switzerland (2011), http://www.visionrd4sd.eu/documents/doc_download/109-case-study-switzerland (last visited Jun.6, 2013). [16] Research Commissions, Swiss National Science Foundation, http://www.snf.ch/E/about-us/organisation/Pages/researchcommissions.aspx (last visted Jun. 6, 2013).

TOP