A Before and After Impact Comparison of Applying Statute for Industrial Innovation Article 23-1 Draft on Venture Capital Limited Partnerships
A Before and After Impact Comparison of Applying Statute for Industrial Innovation Article 23-1 Draft on Venture Capital Limited Partnerships
I. Background
Because the business models adopted by Industries, such as venture capital, film, stage performance and others, are intended to be temporary entities, and the existing business laws are not applicable for such industries,[1] the Legislature Yuan passed the “Limited Partnership Act” in June 2015,[2] for the purpose of encouraging capital injection into these industries. However, since the Act was passed, there are currently only nine limited partnerships listed on the Ministry of Economic Affairs' limited partnership information website. Among them, “Da-Zuo Limited Partnership (Germany) Taiwan Branch” and “Stober Antriebstechnik Limited Partnership (Germany) Taiwan Branch”, are branch companies established by foreign businesses, the remaining seven companies are audio video production and information service businesses. It is a pity that no venture capital company is adopting this format.[3]
In fact, several foreign countries have set up supporting measures for their taxation systems targeting those business structures, such as limited partnerships. For example, the pass-through taxation method (or referred to as single entity taxation) is adopted by the United States, while Transparenzprinzip is used by Germany. These two taxation methods may have different names, but their core ideas are to pass the profits of a limited partnership to the earnings of partners.[4] However, following the adoption of the Limited Partnership Act in Taiwan, the Ministry of Finance issued an interpretation letter stating that because the current legal system confers an independent legal entity status to the business structure of a limited partnership, it should be treated as a profit-seeking business and taxed with Profit-Seeking Enterprise Income Tax.[5] Therefore, to actualize the legislative objective of encouraging innovative businesses organized under tenets of the Limited Partnership Act, the Executive Yuan presented a draft amendment for Article 23-1 of the Statute for Industrial Innovation (hereinafter referred to as the Draft), introducing the "Pass Through Taxation Principle" as adopted by several foreign countries. That is, a Limited Partnership will not be levied with the Profit-Seeking Enterprise Income Tax, but each partner will file income tax reports based on after-profit-gains from the partnership that are passed through to each partner. It is expected that the venture capital industry will now be encouraged to adopt the limited partnership structure, and thus increase investment capital in new ventures.
II. The Pass Through Taxation Method is Applicable to Newly Established Venture Capital Limited Partnerships
1. The Requirements and Effects
(1) The Requirements
According to the provisions of Article 23-1 Paragraph 3 of the Draft, to be eligible for Pass Through Taxation, newly established venture capital limited partnerships must meet the following requirements:
1. The venture capital limited partnerships are established between January 1, 2017 and December 31, 2019.
2. Investment threshold of the total agreed capital contribution, total received capital contribution, and accumulated total capital contribution, within five years of the establishment of venture capital limited partnerships:
|
Total Agreed Capital Contribution in the Limited Partnership Agreement |
Total Received Capital Contribution |
Accumulated Investment Amount for Start-up Companies |
|
|
The Year of Establishment |
3 hundred million |
✕ |
✕ |
|
The Second Year |
✕ |
✕ |
|
|
The Third Year |
1 hundred million |
✕ |
|
|
The Fourth Year |
2 hundred million |
Reaching 30 percent of the total received capital contribution of the year or 3 hundred million NT dollars. |
|
|
The Fifth Year |
3 hundred million |
3. The total amount, that an overseas company applies in capital and investments in actual business operations in Taiwan, reaches 50% of its total received capital contribution of that year.
4. In compliance with government policies.
5. Reviewed and approved by the central competent authority each year.
(2) The Effects
The effects of applying the provisions of Article 23-1 Paragraph 3 of the Draft are as follows:
1. Venture capital limited partnerships are exempt from the Profit-Seeking Enterprise Income Tax.
2. Taxation method for partners in a limited partnership after obtaining profit gains:
(1) Pursuant to the Income Tax Act, Individual partners and for-profit business partners are taxed on their proportionally-calculated, distributed earnings.
(2) Individual partners and foreign for-profit business partners are exempt from income tax on the stock earnings distributed by a limited partnership.
2. Benefit Analysis Before and After Applying Pass Through Taxation Method
A domestic individual A, a domestic profit-making business B, and a foreign profit-making business C jointly form a venture capital limited partnership, One. The earnings distribution of the company One is 10%, 80% and 10% for A, B, and C partners, respectively. The calculated earnings of company One are one million (where eight hundred thousand are stock earnings, and two hundred thousand are non-stock earnings). How much income tax should be paid by the company One, and partners A, B, and C?
(1) Pursuant to the Income Tax Act, before the amended draft:
1. One Venture Capital Limited Partnership
Should pay Profit-Seeking Enterprise Income Tax = (NT$1,000,000 (earning) - NT$500,000[6])x12% (tax rate[7])=NT$60,000
2. Domestic Individual A
Should file a comprehensive income report with business profit income =(NT$1,000,000-NT$60,000) x 10% (company One draft a voucher for net amount for A) + NT$60,000÷2×10% (deductible tax rate)= NT$97,000
Tax payable on profit earnings＝NT$91,500×5%(tax rate)＝NT$4,850
Actual income tax paid＝NT$4,850 - NT$60,000÷2×10% (deductible tax rate) ＝NT$1,485
3. Domestic For-Profit Business B
Pursuant to the provisions of Article 42 of the Income Tax Act, the net dividend or net income received by a profit-seeking company is not included in the income tax calculation.
4. Foreign For-Profit Business C
Tax paid at its earning source＝(NT$1,000,000 - NT$60,000) ×10% (earning distribution rate) ×20% (tax rate at earning source)＝NT$18,800
(2) Applying Pass Through Taxation Method After Enacting the Amendment
1. One Venture Capital Limited Partnership
No income tax.
2. Domestic Individual A
Should pay tax＝NT$800,000 (non-stock distributed earnings)×10% (earning distribution rate)×5% (comprehensive income tax rate)＝NT$1,000
3. Domestic For-Profit Business B
Pursuant to the provisions of Article 42 of the Income Tax Act, the net dividend or net income received by a profit-seeking company is not included in the income tax calculation.
4. Foreign For-Profit Business C
Tax paid at its earning source＝NT$800,000 (non-stock distributed earnings)×10%(earning distribution rate)×20% (tax rate at earning source)＝NT$4,000
The aforementioned example shows that under the situation, where the earning distribution is the same and tax rate for the same taxation subject is the same, the newly-established venture capital limited partnerships and their shareholders enjoy a more favorable tax benefit with the adoption of pass through taxation method:
|
Before the Amendment |
After the Amendment |
||
|
Venture Capital Limited Partnership |
NT$60,000 |
Excluded in calculation |
|
|
Shareholders |
Domestic Individual |
NT$1,850 |
NT$1,000 |
|
Domestic For-Profit Business |
Excluded in calculation |
Excluded in calculation |
|
|
Foreign For-Profit Business |
NT$18,800 |
NT$4,000 |
|
|
Sub-total |
NT$80,650 |
NT$5,000 |
|
III. Conclusion
Compared to the corporate taxation, the application of the pass through taxation method allows for a significant reduction in tax burden. While developing Taiwan’s pass through tax scheme, the government referenced corporate taxation under the U.S. Internal Revenue Code (IRC), where companies that meet the conditions of Chapter S can adopt the “pass through” method, that is, pass the earnings to the owner, with the income of shareholders being the objects of taxation;[8] and studied the "Transparenzprinzip" adopted by the German taxation board for partnership style for-profit businesses. Following these legislative examples, where profits are identified as belonging to organization members,[9] the government legislation includes the adoption of the pass through taxation scheme for venture capital limited partnerships in the amended draft of Article 23-1 of the Statute for Industrial Innovation, so that the legislation is up to international standards and norms, while making an important breakthrough in the current income tax system. This is truly worthy of praise.
[1] The Legislative Yuan Gazette, Vol. 104, No. 51, page 325. URL:http://misq.ly.gov.tw/MISQ//IQuery/misq5000Action.action
[2] A View on the Limited Partnership in Taiwan, Cross-Strait Law Review, No. 54, Liao, Da-Ying, Page 42.
[3] Ministry of Economic Affairs - Limited Partnership Registration Information URL: http://gcis.nat.gov.tw/lmpub/lms/dir.jsp?showgcislocation=true&agencycode=allbf
[4] Same as annotate 2, pages 51-52.
[5] Reference Letter of Interpretation dated December 18, 2015, Tai-Cai-Shui Zi No. 10400636640, the Ministry of Finance
[6] First half of Paragraph 1 of Article 8 of the Income Basic Tax Act
[7] Second half of Paragraph 1 of Article 8 of the Income Basic Tax Act
[8] A Study on the Limited Partnership Act, Master’s degree thesis, College of Law, Soochow University, Wu, Tsung-Yeh, pages 95-96.
[9] Reference annotate 2, pages 52.
Lu, Yi Fan
Legal Researcher
Impact of Government Organizational Reform to Scientific Research Legal System and Response Thereto (2) – For Example, The Finnish Innovation Fund (“SITRA”) III. Comparison of Strength and Weakness of Sitra Projects 1. Sitra Venture Capital Investment Model In order to comprehend how to boost innovation business development to upgrade innovation ability, we analyze and compare the innovation systems applied in Sweden, France and Finland[1] . We analyze and compare the characteristics, strength and weakness of innovation promotion models in terms of funding, networking and professional guidance. Generally, the first difficulty which a start-up needs to deal with when it is founded initially is the funding. Particularly, a technology company usually requires tremendous funding when it is founded initially. Some potentially adequate investors, e.g., venture capitals, seldom invest in small-sized start-up (because such overhead as supervision and management fees will account for a high percentage of the investment due to the small total investment amount). Networking means how a start-up integrates such human resources as the management, investors, technical advisors and IP professionals when it is founded initially. Control over such human resources is critical to a new company’s survival and growth. Professional guidance means how professional knowledge and human resource support the start-up’s operation. In order to make its product required by the market, an enterprise usually needs to integrate special professional knowledge. Notwithstanding, the professional knowledge and talents which are available from an open market theoretically often cannot be accessed, due to market failure[2]. Assuming that Sitra’s funding is prioritized as Pre-seed-Initiation stage, Seed-Development stage and Follow-up – Growth stage, under Finland model, at the Pre-seed-Initiation stage, Sitra will provide the fund amounting to EUR20,000 when Tekes will also provide the equivalent fund, provided that the latter purely provides subsidy, while the fund provided by Sitra means a loan to be repaid (without interest) after some time (usually after commercialization), or a loan convertible to shares. Then, the loan would be replaced by soft or convertible (to shares) investment and the source of funding would turn to be angel investors or local seed capital at the Seed-Development stage. At this stage, the angel investors, local seed capital and Sitra will act as the source of funding jointly in Finland, while Tekes will not be involved at this stage. At the Follow-up-Growth stage, like the Sweden model, Sitra will utilize its own investment fund to help mitigate the gap between local small-sized funding and large-sized international venture capital[3]. How to recruit professional human resources is critical to a start-up’s success. Many enterprises usually lack sufficient professional human resources or some expertise. DIILI service network set up by Sitra is able to provide the relevant solutions. DILLI is a network formed by product managers. Its members actively participate in starts-up and seek innovation. They also participate in investment of starts-up independently sometimes. Therefore, they are different from angel investors, because they devote themselves to the starts-up on a full-time basis[4]. In other words, they manage the starts-up as if the starts-up were their own business. 2. Key to Public Sector’s Success in Boosting Development of Innovation Activity Business In terms of professional guidance, voluntary guidance means the direct supply of such professional resources as financing, human resource and technology to starts-up, while involuntary guidance means the supply of strategic planning in lieu of direct assistance to help the enterprises make routine decisions[5]. The fractured and incomplete professional service attendant market generates low marginal effect. Therefore, it is impossible for the traditional consultation service to mitigate such gap and the investment at the pre-seed initiation stage will be excessive because of the acquisition of the professional services. Meanwhile, professional advisors seldom are involved in consultation services at the pre-seed initiation stage of a start-up because of the low potential added value. Therefore, at such stage, only involuntary professional guidance will be available usually. Under Sitra model, such role is played by an angel investor. Upon analysis and comparison, we propose six suggested policies to boost innovation activities successfully as the reference when observing Sitra operation. First of all, compared with the French model, Finland Sitra and Sweden model set more specific objectives to meet a start-up’s needs (but there is some defect, e.g., Sitra model lacks voluntary professional guidance). Second, structural budget is a key to the successful model. Sitra will receive the funds in the amount of EUR235,000,000 from the Finnish Government, but its operating expenditure is covered by its own operating revenue in whole. Third, it is necessary to provide working fund in installments and provide fund at the pre-seed-initiation stage. Under both of Finland model and Sweden model, funds will be provided at the pre-seed-initiation stage (Tekes is responsible for providing the fund in Finland). Fourth, the difficulty in networking must be solved. In Sitra, the large-sized talent network set up by it will be dedicated to recruiting human resources. Fifth, the voluntary professional guidance is indispensable at the pre-seed-initiation stage, while the same is unavailable at such stage under Sitra model. Instead, the Sweden model is held as the optimal one, as it has a dedicated unit responsible for solving the difficulty to seek profit. Sixth, soft loan[6] will be successfully only when the loan cannot be convertible to shares. At the pre-seed initiation stage or seed-development stage, a start-up is usually funded by traditional loan. Assuming that the start-up is not expected to gain profit, whether the loan may be convertible to shares will also be taken into consideration when the granting of loan is considered (therefore, the fund provider will not be changed to the “capital” provider). Besides, the government authorities mostly lack the relevant experience or knowledge, or are in no position to negotiate with international large-sized venture capital companies. For example, under the French model, the government takes advantage of its power to restrict the venture capital investment and thereby renders adverse impact to starts-up which seek venture capital. Finally, the supply of own fund to meet the enterprises’ needs at seed-development stage and follow-up-growth stage to mitigate the gap with large-sized venture capital[7] is also required by a successful funding model. IV. Conclusion－Deliberation of Finnish Sitra Experience As the leading national industrial innovation ability promoter in Finland, Sitra appears to be very characteristic in its organizational framework or operating mechanism. We hereby conclude six major characteristics of Sitra and propose the potential orientation toward deliberation of Taiwan’s industrial innovation policies and instruments. 1. Particularity of Organizational Standing In consideration of the particularity of Sitra organizational standing, it has two characteristics observable. First, Sitra is under supervision of the Finnish Parliament directly, not subordinated to the administrative organizational system and, therefore, it possesses such strength as flexibility and compliance with the Parliament’s requirements. Such organization design which acts independently of the administrative system but still aims to implement policies has been derived in various forms in the world, e.g., the agency model[8] in the United Kingdom, or the independent apparatus in the U.S.A. Nevertheless, to act independently of the administrative system, it has to deal with the deliberation of responsible political principles at first, which arouses the difficulty in taking care of flexibility at the same time. In Taiwan, the intermediary organizations include independent agencies and administrative corporations, etc., while the former still involves the participation of the supreme administrative head in the right of personnel administration and is subordinated to the ministries/departments of the Executive Yuan and the latter aims to enforce the public missions in the capacity of “public welfare” organization. Though such design as reporting to the Parliament directly is not against the responsible political principles, how the Parliament owns the authority to supervise is the point (otherwise, theoretically, the administrative authorities are all empowered by the parliament in the country which applies the cabinet system). Additionally, why some special authorities are chosen to report to the parliament directly while other policy subjects are not is also disputable. The existence of Sitra also refers to a circumstantial evidence substantiating that Finland includes the innovation policy as one of the important government policies, and also the objective fact that Finland’s innovation ability heads the first in the world. Second, Sitra is a self-sufficient independent fund, which aims to promote technical R&D and also seeks profit for itself, irrelevant with selection of adequate investment subjects or areas. Instead, for this purpose, the various decisions made by it will deal with the utility and mitigate the gap between R&D and market. Such entity is responsible for public welfare or policy projects and also oriented toward gain from investment to feed the same back to the individuals in the organization. In the administrative system, Sitra is not directed by the administrative system but reports to the Parliament directly. Sitra aims to upgrade the national R&D innovation ability as its long-term goal mission and utilizes the promotion of innovation business and development of venture capital market. The mission makes the profit-orientation compatible with the selection of investment subjects, as an enterprise unlikely to gain profit in the future usually is excluded from the national development view. For example, such industries as green energy, which is not likely to gain profit in a short term, is still worth investing as long as it meets the national development trend and also feasible (in other words, selection of marketable green technology R&D, instead of comparison of the strength and weakness in investment value of green energy and other high-polluted energy). 2. Expressly Distinguished From Missions of Other Ministries/Departments For the time being, Sitra primarily invests in starts-up, including indirect investment and direct investment, because it relies on successful new technology R&D which may contribute to production and marketability. Starts-up have always been one of the best options, as large-sized enterprises are able to do R&D on their own without the outsourcing needs. Further, from the point of view of an inventor, if the new technology is marketable, it will be more favorable to him if he chooses to start business on his own or make investment in the form of partnership, instead of transfer or license of the ownership to large-sized enterprises (as large-sized enterprises are more capable of negotiation). However, note that Sitra aims to boost innovation activities and only targets at start-up business development, instead of boosting and promoting the start-up per se. Under the requirement that Sitra needs to seek profit for itself, only the business with positive development view will be targeted by Sitra. Further, Sitra will not fund any business other than innovation R&D or some specific industries. Apparently, Sitra only focuses on the connection between innovation activities and start-up, but does not act as the competent authority in charge of small-sized and medium-sized enterprises. Meanwhile, Sitra highlights that it will not fund academic research activities and, therefore, appears to be distinguished from the competent authority in charge of national scientific research. Though scientific research and technology innovation business, to some extent, are distinguished from each other in quantity instead of quality, abstract and meaningless research is existent but only far away from the commercialization market. Notwithstanding, a lot of countries tend to distinguish basic scientific research from industrial technology R&D in the administration organization's mission, or it has to be. In term of the way in which Sitra carries out its mission, such distinguishing ability is proven directly. 3. Well-Founded Technology Foresight-Based Investment Business The corporate investments, fund investments and project funding launched by Sitra are all available to the pre-designated subjects only, e.g. ecological sustainable development, energy utilization efficiency, and social structural changes, etc. Such way to promote policies as defining development area as the first priority and then promoting the investment innovation might have some strength and weakness at the same time. First of all, the selection of development areas might meet the higher level national development orientation more therefor, free from objective environmental restrictions, e.g. technical level, leading national technology industries and properties of natural resources. Notwithstanding, an enterprise’s orientation toward innovation R&D might miss the opportunity for other development because of the pre-defined framework. Therefore, such way to promote policies as defining development areas or subjects as the first priority will be inevitably based on well-founded technology foresight-based projects[9], in order to take various subjective and objective conditions into consideration and to forecast the technology development orientation and impact to be faced by the home country’s national and social economies. That is, said strength and weakness will be taken into consideration beforehand for foresight, while following R&D funding will be launched into the technology areas pre-designated after thorough analysis. 4. Self-Interested Investment with the Same High Efficiency as General Enterprises Sitra aims to gain profit generally, and its individual investment model, e.g., DIILI, also permits marketing managers to involve business operation. The profit-sharing model enables Sitra to seek the same high efficiency as the general enterprises when purusing its innovation activity development. The investment launched by Sitra highlights that it is not “funding” (which Tekes is responsible for in Finland) or the investment not requiring return. Therefore, it has the system design to acquire corporate shares. Sitra participates in a start-up by offering its advanced technology, just like a general market investor who will choose the potential investment subject that might benefit him most upon his personal professional evaluation. After all, the ultimate profit will be retained by Sitra (or said DIILI manger, subject to the investment model). Certainly, whether the industry which requires permanent support may benefit under such model still remains questionable. However, except otherwise provided in laws expressly, said special organization standing might be a factor critical to Sitra profit-seeking model. That is, Sitra is not subordinated to the administrative system but is under supervision of the parliament independently, and how its staff deal with the conflict of interest issues in the capacity other than the public sector’s/private sector’s staff is also one of the key factors to success of the system. 5. Investment Model to Deal With Policy Instruments of Other Authorities/Agencies Sitra decides to fund a start-up depending on whether it may gain profit as one of its priorities. As aforesaid, we may preliminarily recognize that the same should be consistent with funding to starts-up logically and no “government failure” issue is involved. For example, the funding at the pre-seed-initiation stage needs to tie in with Tekes’ R&D “funding” (and LIKSA service stated herein) and, therefore, may adjust the profit-seeking orientation, thereby causing deviation in promotion of policies. The dispute over fairness of repeated subsidy/funding and rationality of resource allocation under the circumstance must be controlled by a separate evaluation management mechanism inevitably. 6. Affiliation with Enhancement of Regional Innovation Activities Regional policies cannot be separable from innovation policies, especially in a country where human resources and natural resources are not plentiful or even. Therefore, balancing regional development policies and also integrating uneven resource distribution at the same time is indispensable to upgrading of the entire national social economic benefits. The Finnish experience indicated that innovation activities ought to play an important role in the regional development, and in order to integrate enterprises, the parties primarily engaged in innovation activities, with the R&D ability of regional academic research institutions to upgrade the R&D ability effectively, the relevant national policies must be defined for adequately arranging and launching necessary resources. Sitra's approaches to invest in starts-up, release shares after specific period, integrate the regional resources, upgrade the national innovation ability and boost the regional development might serve to be the reference for universities’ centers of innovative incubator or Taiwan’s local academic and scientific sectors[10] to improve their approaches. For the time being, the organization engaged in venture capital investment in the form of fund in Taiwan like Sitra of Finland is National Development Fund, Executive Yuan. However, in terms of organizational framework, Sitra is under supervision of the Parliament directly, while National Development Fund is subordinated to the administrative system of Taiwan. Though Sitra and National Development Fund are both engaged in venture capital investments primarily, Sitra carries out its missions for the purpose of “promoting innovative activities”, while the National Development Fund is committed to achieve such diversified goals as “promoting economic changes and national development[11]” and is required to be adapted to various ministries’/departments’ policies. Despite the difference in the administrative systems of Taiwan and Finland, Sitra system is not necessarily applicable to Taiwan. Notwithstanding, Sitra’s experience in promotion and thought about the system might provide a different direction for Taiwan to think when it is conceiving the means and instruments for industrial innovation promotion policies in the future. [1] Bart Clarysse & Johan Bruneel, Nurturing and Growing Innovation Start-Ups: The Role of Policy As Integrator, R&D MANAGEMENT, 37(2), 139, 144-146 (2007). Clarysse & Bruneel analysis and comparison refers to Sweden Chalmers Innovation model, French Anvar/Banque de Developpement des PMEs model and Finland Sitra PreSeed Service model. [2] id. at 141-143. [3] id. at 141. [4] id. at 145-146. [5] id. at 143. [6] The loan to be repaid is not a concern. For example, the competent authority in Sweden only expects to recover one-fourths of the loan. [7] Clarysse & Bruneel, super note 26, at 147-148. [8] 彭錦鵬，〈英國政署之組織設計與運作成效〉，《歐美研究》，第30卷第3期，頁89-141。 [9] Technology foresight must work with the innovation policy road mapping (IPRM) interactively, and consolidate the forecast and evaluation of technology policy development routes. One study case about IPRM of the environmental sustainable development in the telecommunication industry in Finland, the IPRM may enhance the foresighted system and indicates the potential factors resulting in systematic failure. Please see Toni Ahlqvist, Ville Valovirta & Torsti Loikkanen, Innovation policy road mapping as a systemic instrument for forward-looking policy design, Science and Public Policy 39, 178-190 (2012). [10] 參見李昂杰，〈規範新訊：學界科專辦法及其法制配套之解析〉，《科技法律透析》，第23卷第8期，頁33（2011）。 [11] National Development Fund, Executive Yuan website, http://www.df.gov.tw/(tftgkz45150vye554wi44ret)/page-aa.aspx?Group_ID=1&Item_Title=%E8%A8%AD%E7%AB%8B%E5%AE%97%E6%97%A8#(Last visit on 2013/03/28)
Research on Taiwan’s Policies of Innovative Industry Development in Recent Years (2015-2016)Research on Taiwan’s Policies of Innovative Industry Development in Recent Years (2015-2016) 1. “Five plus Two” Innovative Industries Policy On June 15, 2016, Premier Lin Chuan met with a group of prominent business leaders to talk about a government project on five innovative industries, which aim to drive the next generation of businesses in R.O.C.. Subsequently the program was expanded to include “new agriculture” and the “circular economy” as the “+2.” The program was then broadened even further to include the Digital Economy and Cultural Innovation, with even Semiconductors and IC Design included, although the name of the policy remains 5+2. Speaking at the Third Wednesday Club in Taipei, Premier Lin said the industries require more investment to drive the next generation of industry growth momentum in R.O.C., create high-quality jobs, and upgrade the industrial competitiveness. Executive Yuan has selected the five innovative industries of Asia Silicon Valley, smart machinery, green energy, biotech & pharmaceutical industry, and national defense, which will be the core for pushing forward the next-generation industrial growth and improve overall environment by creating a cluster effect that links local and global industries, while simultaneously raising wages and stimulating employment. Premier Lin said, regarding industrial competitiveness and investment issues the lackluster economy has stifled investment opportunities, and with limited government budgets, the private sector must play the larger role in investments. Regarding the “Five major Innovative Industries” project, Premier Lin said the National Development Council is currently drafting long-term plan to attract talent, create a thriving working environment, and infuse companies with more innovation, entrepreneurship and young workers. In addition, R.O.C. must also cultivate a strong software industry, without which it would be difficult to build a highly intelligent infrastructure. The National Development Council said the program possess both the capacity of domestic demand and local characteristics, as the core for pushing forward the next-generation industrial growth. The government aims to promote a seamless synergy of investment, technology, and the talent, in order to develop innovative industrial clusters for furthering global linkage and nurturing international enterprises. In the meantime, the government also aims at achieving the enhancement of technology levels, balanced regional development, as well as realizing the benefits of job creation. 2. The Asia Silicon Valley Development Plan In September 2016 the government approved the Asia Silicon Valley Development Plan, which connect Taiwan to global tech clusters and create new industries for the next generation. By harnessing advanced technological research and development results from around the world, the plan hopes to promote innovation and R&D for devices and applications of the internet of things (IoT), and upgrade Taiwan’s startup and entrepreneurship ecosystem. The four implementation strategies are as follows: (1) Building a comprehensive ecosystem to support innovation and entrepreneurship (2) Connect with international research and development capabilities (3) Create an IoT value chain (4) Construct diversified test beds for smart products and services by establishing a quality internet environment Taiwan’s first wave of industrial development was driven by continuous technological innovation, and the wave that followed saw the information industry become a major source of economic growth. 3. Global Hub for Smart Machinery On July 21, 2016, Premier Lin Chuan said at a Cabinet meeting, the government aims to forge Taiwan into a global manufacturing hub for intelligent machinery and high-end equipment parts. Upgrading from precision machinery to intelligent machinery is the main goal of putting intelligent machinery industry into focal execution area expecting to create jobs and to maximize the production of production line as well as to forge central Taiwan into a global manufacturing hub for smart machinery. The Ministry of Economic draws up the Intelligent Machinery Promotion Program to establish the applications of the technology and capacity of services that fit the demand of the market. The program embodies two parts. The first is to accelerate the industrialization of intelligent machinery for building an ecosystem. The second is to improve intelligentization by means of introducing the intelligent machinery into the industries. The execution policy of the Intelligent Machinery Promotion Program is to integrate the intelligent functions such as malfunctions predictions, accuracy compensation, and automatic parameter setting into the machinery industry so as to have the ability to render the whole solutions to the problem. Simultaneously, the program employs three strategies, which are connecting with the local industries, connecting with the future, and connecting with the world, to develop the mentioned vision and objectives. Especially, the way to execute the strategy of connecting with the local industries consists of integrating the capabilities of industry, research organization and the government. At the meantime, the government will encourage the applications of smart vehicles and unmanned aerial vehicles and train the talents as well. The thinking of connecting with the future lies in the goal of deepening the technologies, establishing systematic solutions, and providing a testing areas, which focus on the related applications such as aerospace, advanced semiconductor, smart transportation, green vehicles, energy industry, whole solutions between factories, intelligent man-machine coordination, and robots of machine vision combined with intelligent machinery applications. The government would strengthen the cross-cutting cooperation to develop machines for aerospace and integrate the system of industrial division to form a cluster in order to create Taiwanese IoT technology. Eventually, Taiwan will be able to connect with the world, enhance international cooperation, expand export trade and push industry moving toward the age of information and digital economy and break the edge of industry technology to make the industry feel the goodwill of the government. 4. Green energy innovations The government’s “five plus two” innovative industries program includes a green energy industrial innovation plan passed October 27, 2016 that will focus on Taiwan’s green needs, spur extensive investments from within and outside the country, and increase quality employment opportunities while supporting the growth of green energy technologies and businesses. The government is developing the Shalun Green Energy Science City. The hub’s core in Shalun will house a green energy technology research center as well as a demo site, providing facilities to develop research and development (R&D) capabilities and conduct the requisite certification and demonstration procedures. The joint research center for green energy technologies will integrate the efforts of domestic academic institutions, research institutes, state-run enterprises and industry to develop green energy technologies, focusing on four major functions: creating, conserving and storing energy, as well as system integration. Development strategies include systems integration and finding better ways to conserve, generate and store energy by promoting green energy infrastructure, expanding renewable energy capabilities and cooperating with large international firms. The emergence of the green economy has prompted the government to build infrastructure that will lay the foundation for Taiwan’s green energy sector, transform the nation into a nuclear-free society, and spur industrial innovation. For innovative technology industries, green energy industries can drive domestic economic development by attracting more venture capital and creating more employment opportunities. 5. Biomedical Industry Innovation Program To facilitate development of Taiwan’s biomedical industry, the government proposed a “biomedical industrial innovation promotion program” on November 10, 2016 to serve as the nation’s new blueprint for innovative biomedical research and development (R&D). To facilitate development of the biomedical industry, the government proposed a “biomedical industrial innovation promotion program”. The program centered on the theme of “local, global and future links,” “the biomedical industrial innovation promotion program” includes four action plans: (1) Build a comprehensive ecosystem To address a rapidly ageing global population, Taiwan will enhance the biomedical industry’s capacity for innovation by focusing on talent, capital, topic selection, intellectual property, laws and regulations, and resources. (2) Integrate innovative business clusters Established by the Ministry of Science and Technology and based in Hsinchu Biomedical Science Park, the center will serve as a government think tank on related issues. It is also tasked with initiating and advancing exchanges among local and foreign experts, overseeing project implementation, promoting investment and recruiting talents. Equally important, it will play a central role in integrating resources from other biomedical industry clusters around the country, including Nangang Software Park in Taipei City, Central Taiwan Science Park in Taichung City and Southern Science Park in Tainan City. (3) Connect global market resources Building on Taiwan’s advantages, promote M&A and strategic alliances, and employ buyout funds and syndicated loans to purchase high-potential small and medium-sized international pharmaceutical companies, medical supply companies, distributors and service providers. Use modern mosquito-borne disease control strategies as the foundation of diplomatic cooperation, and promote the development of Taiwan’s public health care and medical services in Southeast Asian countries. (4) Promote specialized key industries Promote niche precision medical services, foster clusters of world-class specialty clinics, and develop industries in the health and wellness sectors. 6. DIGITAL NATION AND INNOVATIVE ECONOMIC DEVELOPMENT PLAN On November 24, 2016, the Executive Yuan promote the Digital Nation and Innovative Economic Development Plan (2017-2025) (DIGI+ program), the plan’s main goals for 2025 are to grow R.O.C.’s digital economy to NT $ 6.5 trillion (US$205.9 billion), increase the digital lifestyle services penetration rate to 80 percent, speed up broadband connections to 2 Gbps, ensure citizens’ basic rights to have 25 Mbps broadband access, and put R.O.C. among the top 10 information technology nations worldwide. In addition to the industrial economy, the program can jump off bottlenecks in the past industrial development, and promote the current Internet of things, intelligent machinery, green energy, medical care and other key national industries, but also attaches great importance to strengthening the digital infrastructure construction, the development of equal active, as well as the creation of a service-oriented digital government. It is also hoped that through the construction of a sustainable and intelligent urban and rural area, the quality of life will be improved and the people will enjoy a wealthy and healthy life. Over the next 8 years, the government will spend more than NT $ 150 billion. The plan contains several important development strategies: DIGI+Infrastructure: Build infrastructure conducive to digital innovation. DIGI+Talent: Cultivate digital innovation talent. DIGI+Industry: Support cross-industry transformation through digital innovation. DIGI+Rights: Make R.O.C. an advanced society that respects digital rights and supports open online communities. DIGI+Cities: Build smart cities through cooperation among central and local governments and the industrial, academic and research sectors. DIGI+Globalization: Boost R.O.C.’s standing in the global digital service economy. The program aims to build a favorable environment for digital innovation and to create a friendly legal environment to complete the draft amendments to the Digital Communications Law and the Telecommunications Act as soon as possible, foster cross-domain digital talents and develop advanced digital technologies, To create a digital economy, digital government, network society, smart urban and rural and other national innovation ecological environment in order to achieve "the development of active network society, promote high value innovation economy, open up rich countries of the policy vision. In order to achieve the overall effectiveness of the DIGI + program, interdisciplinary, inter-ministerial, inter-departmental and inter-departmental efforts will be required to collaborate with the newly launched Digital National Innovation Economy (DIGI +) Promotion Team. 7. “NEW AGRICULTURE” PROMOTION PROJECT At a Cabinet meeting On December 08, 2016, Premier Lin Chuan underscored the importance of a new agricultural paradigm for Taiwan’s economic development, adding that new agriculture is an integral part of the “five plus two” industrial innovation projects proposed by President Tsai Ing-wen. The “new agriculture” promotion project uses innovation technology to bring value to agricultural, and build new agricultural paradigm, agricultural safety systems and promote agricultural marketing. This project also takes resources recycling and environmental sustainability into consideration to promote agricultural transformation, and build a robust new agricultural system. This agricultural project is expected to increase food self-sufficiency rate to 40%, level up agricultural industry value by NT$43.4 billion, create 370,000 jobs and increase portion of total agricultural exports to new overseas markets to 57% by 2020. This project contains three aspects: First is “building new agricultural paradigm”: to protect farmers, agricultural development and ensure sustainability of the environment. Second is “building agricultural safety systems”: Ensuring product safety and quality, and building a certification system which can be trust by the consumers and is consistent with international standards. Last but not least is “leveling up agricultural marketing and promotions”: enhancing promotion, making the agricultural industry become profitable and sustainable. Council of Agriculture’s initiatives also proposed 10 policies to leverage agricultural industry, not only just use the passive subsidies measure of the past. These policies including promoting environmentally friendly farming practices; giving farmers that are beneficial(green) to the land payments; stabilizing farmers’ incomes; increasing the competitiveness of the livestock and poultry industries; using agricultural resources sustainably; ensuring the safety of agricultural products; developing technological innovation; leveling up food security; increasing diversification of domestic and external marketing channels; and increasing agriculture industry added value. In this statutes report, Council of Agriculture said this project will accelerate reforms, create new agricultural models and safety systems, but also build a new sustainable paradigm of agricultural. Premier Lin Chuan also backed this “five plus two innovative industries” program and “new agriculture” project, and asked Council of Agriculture to reviewing the possible legal changes or amendment that may help to enhance the transformation of agricultural sector.
Adopting Flexible Mechanism to Promote Public Procurement of Innovation—the Amendment of Article 27 of the Statute for Industrial InnovationAdopting Flexible Mechanism to Promote Public Procurement of Innovation—the Amendment of Article 27 of the Statute for Industrial Innovation I.Introduction To further industrial innovation, improve industrial environment, and enhance industrial competitiveness through a systematic long-term approach, the Statute for Industrial Innovation (hereinafter referred to as the Statute) has been formulated in Taiwan. The central government authority of this Statute is the Ministry of Economic Affairs, and the Industrial Development Bureau of the Ministry of Economic Affairs (henceforth referred to as the IDB) is the administrative body for the formulation of this Statute. Since its formulation and promulgation in 2010, the Statute has undergone four amendments. The latest amendment, passed by the Legislative Yuan on November 3, 2017, on the third reading, is a precipitate of the international industrial development trends. The government is actively encouraging the investment in industrial innovation through a combination of capital, R&D, advanced technologies and human resources to help the promotion of industrial transformation, hence this large scale amendment is conducted. The amendment, promulgated and enacted on November 22, 2017, focuses on eight key points, which include: state-owned businesses partaking in R&D (Article 9-1 of the amended provisions of the Statute), the tax concessions of the limited partnership venture capital businesses (Article 2, Article 10, Article 12-1 and Article 23-1 of the amended provisions of the Statute), the tax concessions of Angel Investors (Article 23-2 of the amended provisions of the Statute), applicable tax deferral of employees' stock compensation (Article 19-1 of the amended provisions of the Statute), tax deferral benefit of stocks given to research institution creators (Article 12-2 of the amended provisions of the Statute), the promotion of flexible mechanism for innovation procurement (Article 27 of the amended provisions of the Statute), the establishment of evaluation mechanism for intangible assets (Article 13 of the amended provisions of the Statute), and forced sale auction of idled land for industrial use (Article 46-1 of the amended provisions of the Statute). This paper focuses on the amendment of Article 27 of the Fourth Revision of the Statute, which is also one of the major focuses of this revision—promoting flexible mechanism for innovation procurement, using the mass-market purchasing power of the government as the energetic force for the development of industrial innovation. II.Explanation of the Amendment of Article 27 of the Statute 1.Purposes and Descriptions of the Amendment of Article 27 of the Statute The original intent of Article 27 (hereinafter referred to as the Article) of the Statute, prior to the latest amendment (content of the original provisions is shown in Table 1), was to encourage government agencies and enterprises to give a priority to using green products through the "priority procurement" provisions of Paragraph 2, which allow government agencies to award contracts to green product producers using special government procurement procedures, so as to increase the opportunities for government agencies to use green products, and thereby promote the sustainable development of the industry. In view of the inherent tasks of promoting the development of industrial innovation, and considering that, using the large-scale government procurement demand to guide industrial innovation activities, has become the policy instrument accepted by most advanced countries, the IDB expects that, with the latest amendment of Article 27, the procurement mechanism policy for software, innovative products and services, in addition to the original green products, may become influential, and that "innovative products and services" may be included in the scope of "Priority Procurement" of this Article namely, make “priority procurement of innovative products and services” as one of the flexible mechanisms for promoting innovation procurement. A comparison of the amended provisions and the original provisions is shown in Table 1, and an explanation of the amendment is described as follows:[1] Table 1 A Comparison of Article 27 Amendment of the Statute for Industrial Innovation Amended Provisions Original Provisions Article 27 (I) Each central government authority in charge of end enterprises of a specific industry shall encourage government organizations (agencies) and enterprises to procure software, innovative and green products or services. (II) To enhance the procurement efficiencies, as effected by supply and demand, the central government authority shall offer assistance and services to the organizations (agencies) that handle these procurements as described in the preceding paragraph; wherein, Inter-entity Supply Contracts that are required for the aforesaid procurements, the common requirements shall be decided, in accordance with policy requirements, upon consultation between the central government authority and each central government authority in charge of end enterprises of a specific industry. (III) Where the software, innovative and green products or services, as described in Paragraph 1, must be tested, audited, accredited and certified, their associated fees and charges may be reduced, exempted, or suspended. (IV) Government organizations (agencies) may specify in the tender document the priority procurement of innovative and green products or services that have been identified to meet the requirements of paragraph 1. However, such a specification shall not violate treaties or agreements that have been ratified by the Republic of China. The measures concerning specifications, categories, and identification procedures of software, innovative and green products or services as prescribed in Paragraph 1; the testing, auditing criteria, accreditation and certification as prescribed in paragraph 3; and the Priority Procurement in paragraph 4 and other relevant items, shall be established by each central government authority in charge of end-enterprises of a specific industry. Article 27 (I) Each central government authority in charge of end enterprises shall encourage government agencies and enterprises to give priority to green products that are energy/resources recyclable/renewable, energy and water saving, non-toxic, less-polluting, or able to reduce the burden on the environment. (II) Agencies may specify in the tender documents that priority is given to green products meeting the requirement set forth in the preceding Paragraph. (III) The regulations governing the specifications, categories, certification procedures, review standards, and other relevant matters relating to the green products as referred to in the preceding Paragraph shall be prescribed by the central government authorities in charge of end enterprises. Source: The Ministry of Economic Affairs (I).Paragraph 1 In order to compel each central government authority in charge of end enterprises of a specific industry to motivate industrial innovation activities and sustainable development on the basis of requirements, and to support the development of the software industry in Taiwan, the provision, that such an authority should encourage government organizations (agencies) and enterprises to procure software and innovative products and services, is added in paragraph 1. (II).Paragraph 2 This procurement, as described in paragraph 1, is different from the property or services procurement of general affairs as handled by various organizations. To enhance procurement efficiencies, as effected by supply and demand, the central government authority, i.e., the Ministry of Economic Affairs, shall provide relevant assistance and services to organizations (agencies) handling these procurements, hence the added provisions in paragraph 2. For purchases using inter-entity supply contracts, which are bound by the requirements of this Article, due to their prospective nature, and that the common demand of each organization is difficult to make an accurate estimate by using a demand survey or other method, the Ministry of Economic Affairs shall discuss the issues with each central government authority in charge of end-enterprises of a specific industry, who consult or promote policies, and are in charge of end enterprises of a specific industry, and then make decisions in accordance with the policy promotion requirements. (III).Paragraph 3 The fee schedule for testing, auditing, accrediting and certifying software, innovative and green products or services is covered by Article 7, Administrative Fees of the Charges And Fees Act. The authorities in charge should determine relevant fee standards.However, considering that the test, audit, accreditation and certification may be conducted during a trial or promotional period, or circumstances dictate that it is necessary to motivate tenderer participation, the fee may be reduced, waived or suspended; hence, paragraph 3 is added. (IV).Paragraph 4 Paragraph 2 of the original provision is moved to paragraph 4 with the revisions made to paragraph 1, accordingly, and the provision for using Priority Procurement to handle innovative products or services is added. However, for organizations covered by The Agreement on Government Procurement (GPA), due to Taiwan's accession to the WTO, ANZTEC, and ASTEP, their procurement of items covered in the aforesaid agreements with a value reaching the legislated threshold, shall be handled in accordance with the regulations stipulated in the aforesaid agreements; hence the stipulation in the proviso that the procurement must not violate the provisions of treaties or agreements ratified by the Taiwan government. (V).Paragraph 5 Paragraph 3 of the original Article is moved to paragraph 5 with the revisions made to paragraph 1, accordingly, and the provision, that authorizes each central government authority in charge of end enterprises of a specific industry to determine appropriate measures concerning the methods of defining software, innovative and green products and services, as well as matters relating to test, accreditation, certification and priority procurement, is added. 2.The Focus of the Amendment of Article 27 of the Statute—Promoting a Flexible Mechanism for Innovation Procurement As previously stated, the amendment of this Article aims to stimulate activities of industrial innovation by taking advantage of the huge demand from government agencies. With the government agencies being the users of the innovative products or services, government's procurement market potential is tapped to support the development of industrial innovation. The original intention of amendment is to incorporate the spirit of Public Procurement of Innovation[2] into this Article, and to try to introduce EU's innovation procurement mechanism[3] into our laws. So that, a procurement procedure, that is more flexible and not subject to the limitation of procurement procedures currently stipulated by the Government Procurement Act, may be adopted to facilitate government sector action in taking the lead on adopting innovative products or services that have just entered their commercial prototype stage, or utilizing the demand for innovation in the government sector to drive industry's innovative ideas or R&D (that can not be satisfied with the existing solutions in the marketplace). However, while it is assessing the relevant laws and regulations of our government procurement system and the practice of implementation, the use of the current government procurement mechanism by organizations in the public sector to achieve the targets of innovation procurement is still in its infancy. It is difficult to achieve the goal, in a short time, of establishing a variety of Public Procurement of Innovation Solutions (PPI Solutions) as disclosed in the EU's Directive 2014/24 / EU, enacted by the EU in 2014, in ways that are not subject to current government procurement legislation. Hence, the next best thing: Instead of setting up an innovative procurement mechanism in such a way that it is "not subject to the restrictions of the current government procurement law", we will focus on utilizing the flexible room available under the current system of government procurement laws and regulations, and promoting the "flexible mechanism for innovation procurement” paradigm. With the provisions now provided in Article 27 of the Statute for Industrial Innovation, the government sector is authorized to adopt the "Priority Procurement" method on innovative products and services, thus increasing the public sector's access to innovative products and services. With this amendment, in addition to the "green products" listed in the original provisions of paragraph 1 of the Statute, "software" and "innovative products or services"[4] are now incorporated into the target procurement scope and each central government authority in charge of end enterprises of a specific industry should now encourage government organizations and enterprises to implement; however, the provisions of this paragraph do not have the specific effect of law, they are declaratory provisions. Two priorities are the１ primary focus of the provisions of paragraph 2 and paragraph 4 of this Article for promoting flexible mechanism for innovation procurement: (I)The procurement of software, innovative and green products or services that uses Inter-entity Supply Contracts may rely on the "policy requirement" to establish the common demand. According to the first half of the provisions of paragraph 2 of this Article, the Ministry of Economic Affairs, being the central government authority of the Statute, may provide assistance and services to organizations dealing with the procurement of software, innovative and green products and services.This is because the procurement subjects, as pertaining to software, products or services that are innovative and green products (or services), usually have the particularities (especially in the software) of the information professions; different qualities (especially in innovative products or services), and are highly profession-specific. They are different from the general affairs goods and services procured by most government agencies. Hence, the Ministry of Economic Affairs may provide assistance and service to these procurement agencies, along with the coordination of relevant organizations, in matters relating to the aforesaid procurement process in order to improve procurement efficiency as relates to supply and demand. Pursuant to the second half of Paragraph 2 of this Article, if the inter-entity supply contract method is used to process the procurement of software, innovative products and services, green products (or services) and other related subjects, there could be "Commonly Required" by two or more organizations concerning the procurement subjects, so in accordance with the stipulations of Article 93 of the Government Procurement Act, and Article 2 of the Regulations for The Implementation of Inter-entity Supply Contracts[5], an investigation of common requirements should be conducted first. However, this type of subject is prospective and profession-specific (innovative products or services in particular), and government organizations are generally not sure whether they have demand or not, which makes it difficult to reliably estimate the demand via the traditional demand survey method[6], resulting in a major obstacle for the procurement process. Therefore, the provisions are now revised to allow the Ministry of Economic Affairs to discuss procurement with each central government authority in charge of end enterprises of a specific industry, who consult or promote policies (such as the National Development Council, or central government authority in charge of end enterprises of a specific industry relevant to the procurement subjects), and then make decisions based on the quantities of goods and services of common requirements in accordance with the demand for promoting the policy. The provisions explicitly stipulate such flexibility in adopting methods other than the "traditional demand survey" method, as is required by laws for the common demand of Inter-entity Supply Contracts. Thus, agencies currently handling procurement of prospective or innovative subjects using inter-entity supply contracts, may reduce the administrative burden typically associated with conducting their own procurement. In addition, with a larger purchase quantity demand, as generated from two or more organizations, the process can more effectively inject momentum into the industry, and achieve a win-win situation for both supply and demand. (II)Government organizations may adopt "Priority Procurement" when handling procurement of innovative and green products or services. Prior to the amendment, the original provision of paragraph 2 of this Article stipulates that organizations may specify in the tender document Priority Procurement of certified green products; Additionally, a provision of paragraph 3 of the original Article stipulates that each central government authority in charge of end enterprises of a specific industry is authorized to establish the specifications, categories and other relevant matters of the green products[7] (according to the interpretation of the original text, it should include "Priority Procurement" in paragraph 3 of the Article).After the amendment of the Article, paragraph 2 of the original Article is moved to paragraph 4. In addition to the original green products, "innovative products or services" are included in the scope of "Priority Procurement" that organizations are permitted to adopt (but, the "software" in paragraph 1 was not included[8]). However, for organizations covered by The Agreement on Government Procurement (GPA), due to Taiwan's accession to the WTO, ANZTEC, and ASTEP, their procurement of items covered by the aforesaid agreements with a value reaching the stated threshold, shall be handled in accordance with the regulations stipulated in the aforesaid agreements; hence the stipulation in the proviso that the procurement must not violate the provisions in treaties or agreements ratified by the Taiwan government. Additionally, paragraph 3 of the original Article is moved to paragraph 5. Each central government authority in charge of end enterprises of a specific industry is authorized to use their own judgment on matters concerning the specifications, categories, certification processes of software, innovative and green products or services and the method for Priority Procurement of paragraph 4. In accordance with the authorization in paragraph 5 of the amended provision of this Article, each central government authority in charge of end enterprises of a specific industry may, depending on the specific policy requirement that promotes innovation development of its supervised industry, establish methods of identification and the processes of Priority Procurement for “Specific categories of innovative products or services", especially on products or services fitting the requirements of the method of using the demands of government organizations to stimulate industrial innovation. The established "Regolations for priority procurement of Specific categories of innovative products or services" is essentially a special regulation of the government procurement legislation, which belongs to the level of regulations, that is, it allows the organizations to apply measures other than the government procurement regulations and its related measures to the procurement process, and adopt "Preferential Contract Awarding" for qualified innovative products or services. Any government agency that has the need to procure a particular category of innovative product or service may, in accordance with the provisions of paragraph 4 of this Article, specify the use of Priority Procurement in the tender document, and administer the procurement, in accordance with the process of this particular category of innovative products, or priority procurement. The agency is now enabled to follow a more flexible procurement process than that of the government procurement regulations to more smoothly award contracts for qualified innovative products or services. Citing two examples of this applied scenario: Example one, "innovative information services": The central government authority in charge of information services is IDB. Thus, IDB may, according to the authorization provided for in paragraph 5 of the Article, establish the identification methods for innovative information services (the purpose of which is to define the categories and specifications of innovative services covered in the scope of priority procurement) and priority procurement processes, pertaining to emerging information services that are more applicable to the requirements of government agencies, such as: cloud computing services, IoT services, and Big Data analysis services.Example two, "Innovative construction or engineering methods": The central government authority in charge of construction affairs is the Construction and Planning Agency of the Ministry of the Interior. Since the agency has already established the "Guidelines for Approval of Applications for New Construction Techniques, Methods, Equipment and Materials", the agency may establish a priority procurement process for new construction techniques, methods or equipment, in accordance with the stipulations in paragraph 5 of the Article. Government agencies may conduct procurement following any of these priority procurement practices, if there is a requirement for innovative information services, or new construction techniques, methods or equipment. In addition to the two aforementioned flexible mechanisms for innovation procurement, where government agencies are granted flexible procedures to handle the procurement of innovative products or services via the use of the flexible procurement mechanism, paragraph 3, concerning the incentive measures of concessionary deductions, is added to the Article to reduce the bidding costs for tenderers participating in the tender. For the Procurement of software, innovative and green products or services encouraged by each central government authority in charge of end-enterprises of a specific industry (not limited to those handled by the authorities themselves, using inter-entity supply contracts or priority procurement methods), if the procurement subjects are still required to be tested, audited, accredited and certified by the government agencies, such a process falls under the scope of administrative fees collection, pursuant to paragraph 1 Article 7 of the Charges And Fees Act. However, considering that the item subject to test, audit, accreditation and certification may be in a trial or promotional period, or that it may be necessary to motivate tenderer participation, the provisions of paragraph 3 are thusly added to the Article to reduce, waive, or suspend the collection of aforementioned fees. Executive authorities in charge of collecting administrative fees shall proceed to reduce, waive, or suspend the collection pursuant to the stipulations of paragraph 3 of the Article and Article 12 subparagraph 7 of the Charges And Fees Act.[9] III.The direction of devising supporting measures of flexible mechanism for innovation procurement The latest amendment of the Statute for Industrial Innovation was promulgated and enacted on November 22, 2017, it is imperative that supporting measures pertaining to Article 27 of the Statute be formulated. As previously stated, the flexible mechanism for innovation procurement, as promoted in this Article, is designed specifically for the products or services that are pertinent to the government procurement requirements and are capable of stimulating industrial innovation, and providing a more flexible government procurement procedure for central authorities in charge of a specific industry as a policy approach in supporting industry innovation. Thus, the premise of devising relevant supporting measures is dependent on whether the specific industry, as overseen by the particular central authority, has a policy in place for promoting the development of industrial innovation, and on whether it is suitable in promoting the flexible mechanism for innovation procurement as described in this Article. The purpose of this Article is to promote the flexible mechanism for innovation procurement. Supporting measures pertaining to this Article will focus on the promotion of devising an "Innovation Identification Method", and of the "Priority Procurement Process" of the innovative products or services of each industry that central government authorities oversee. The former will rely on each central government authority in charge of a specific industry to charter an industry-appropriate and profession-specific planning scheme; while, for the latter, the designing of a priority procurement process, in accordance with the nature of the various types of innovative products or services, does not have to be applicable to all. However, regardless what type of innovative products or services the priority procurement process is designed for, the general direction of consideration should be given to - taking the different qualities of innovative products or services as the core consideration. Additionally, the attribute of the priority procurement procedures focusing specifically on the different qualities of the innovative subjects relates to the special regulation relevant to the government procurement regulations. Thus, the procurement procedures should follow the principle that if no applicable stipulation is found in the special regulation, the provisions of the principal regulation shall apply. The so-called "Priority Procurement" process refers to the "Preferential Contract Awarding" on tenders that meet certain criteria in a government procurement procedure. The existing Government Procurement Act (GPA, for short) and its related laws that have specific stipulations on "Priority Procurement" can be found in the "Regulations for Priority Procurement of Eco-Products" (Regulations for Eco-Products Procurement, for short), and the "Regulations for Obliged Purchasing Units / Institutions to Purchase the Products and Services Provided by Disabled Welfare Institutions, Organizations or Sheltered Workshops" (Regulations for Priority Procurement of Products or Services for Disabled or Shelters, for short). After studying these two measures, the priority procurement procedures applicable to criteria-conformed subjects can be summarized into the following two types: 1.The first type: Giving preferential contract awarding to the tenderer who qualifies with "the lowest tender price”, as proposed in the tender document, and who meets a certain criteria (for example, tenderers of environmental products, disabled welfare institutions, or sheltered workshops). There are two scenarios: When a general tenderer and the criteria-conformed tenderer both submit the lowest tender price, the criteria-conformed tenderer shall obtain the right to be the "preferential winning tender" without having to go through the Price Comparison and Reduction Procedures. Additionally, if the lowest tender price is submitted by a general tenderer, then the criteria-conformed tenderers have the right to a "preferential price reduction” option, that is, the criteria-conformed tenderers can be contacted, in ascending order of the tender submitted, with a one time option to reduce their bidding prices. The first tenderer who reduces their price to the lowest amount shall win the tender. Both the Regulations for Eco-Products Procurement[10] and Regulations for Priority Procurement of Products or Services for Disabilities or Shelters[11] have such relevant stipulations. 2.The second type: It is permitted to give Preferential Contract Awarding to a criteria-conformed tenderer, when the submitted tender is within the rate of price preference. When the lowest tenderer is a general tenderer, and the tender submitted by the criteria-conformed tenderer is higher than the lowest tender price, the law permits that if the tender submitted is "within the rate of price preference ", as set by the procuring entity, the procuring entity may award the contract preferentially to "the tender submitted by the criteria-conformed tenderer." The premise for allowing this method is that the tender submitted by the criteria-conformed tenderer must be within the preferential price ratio. If the submitted tender is higher than the preferential price ratio, then the criteria-conformed tenderer does not have the right to preferential contract awarding. The contract will be awarded to theother criteria-conformed tenderer, or to a general tenderer. This method is covered in the provisions of the Regulations for Eco-Products Procurement[12]. However, the important premise for the above two priority procurement methods is that the nature of the subject matter of the tender is suitable for adopting the awarding principle of the lowest tender (Article 52, Paragraph 1, Subparagraphs 1 and 2 of the Procurement Act), that is, it is difficult to apply these methods to the subjects if they are different qualities. Pursuant to the provisions of Article 66 of the Enforcement Rules of the Government Procurement Act, the so-called "different qualities" refers to the construction work, property or services provided by different suppliers that are different in technology, quality, function, performance, characteristics, commercial terms, etc. Subjects of different qualities are essentially difficult to compare when based on the same specifications. If just looking at pricing alone it is difficult to identify the advantages and disadvantages of the subjects, hence, the awarding principle of the lowest tender is not appropriate. The innovative subjects are essentially subjects of different qualities, and under the same consideration, they are not suitable for applying the awarding principle of the lowest tender. Therefore, it is difficult to adopt the lowest-tender-based priority procurement method for the procurement of innovative subjects. In the case of innovative subjects with different qualities, the principle of the most advantageous tender should be adopted (Article 52 Paragraph 1 Subparagraph 3 of the Procurement Act) to identify the most qualified vender of the subjects through open selection. Therefore, the procedure for the priority procurement of innovative subjects with different qualities should be based on the most advantageous tender principle with focus on the "innovativeness" of the subjects, and consideration on how to give priority to tenderers, who qualify with the criteria of innovation. Pursuant to the provisions of Article 56 Paragraph 4 of the Procurement Act, the Procurement and Public Construction Commission has established the "Regulations for Evaluation of the Most Advantageous Tender". The tendering authorities adopting the most advantageous tender principle should abide by the evaluation method and procedures delineated in the method, and conduct an open selection of a winning tender. According to the Regulations for Evaluation of the Most Advantageous Tender, in addition to pricing, the tenderers' technology, quality, function, management, commercial terms, past performance of contract fulfillment, financial planning, and other matters pertaining to procurement functions or effectiveness, maybe chosen as evaluation criteria and sub-criteria. According to the three evaluation methods delineated in the provisions of Article 11 of the Regulations for Evaluation of the Most Advantageous Tender (overall evaluation score method, price per score point method, and ranking method), pricing could not been included in the scoring. That is, "the prices of the subjects" is not the absolute criterion of evaluation of the most advantageous tender process. The priority procurement procedures designed specifically for innovative subjects with different qualities may adopt an evaluation method that excludes "pricing" as part of the scoring criterion so as to give innovative subject tenderers the opportunity to be more competitive in the bidding evaluation process, and due to the extent of their innovativeness, obtain the right to preferential tenders. If it must be included in the scoring, the percentage of the total score for pricing should be reduced from its usual ratio[13], while stipulating explicitly that "innovation" must be included as part of the evaluation criteria. In addition, its weight distribution should not be less than a ratio that highlights the importance of innovation in the evaluation criteria. Furthermore, when determining how to give preference to tenderers who meet certain innovation criteria in the contract awarding procedures, care should be taken to stay on focus with the degree of innovation of the subject (the higher the degree of innovation, the higher the priority), rather than giving priority to arbitrary standards. In summary, with consideration of priority procurement procedures designed specifically for innovative subjects with different qualities, this paper proposes the following preliminary regulatory directions: 1.Adopt the awarding principle of the most advantageous tender. 2.Explicitly stipulate the inclusion of "innovation" in the evaluation criteria and sub-criteria, and its ratio, one that indicates its importance, should not be less than a certain percentage of the total score (for example 20%). 3.Reduce the distributed ratio of "price" in the scoring criteria in the open selection. 4.After the members of the evaluation committee have concluded the scoring, if more than two tenderers have attained the same highest overall evaluated score or lowest quotient of price divided by overall evaluated score, or more than two tenderers have attained the first ranking, the contract is awarded preferentially to the tenderer who scores the highest in the "innovation" criterion. 5.When multiple awards (according to Article 52 Paragraph 1 Subparagraph 4 of the Procurement Act) are adopted, that is, there is more than one final winning tender, the procuring entity may select the tenderers with higher innovation scores as the price negotiation targets for contract awarding, when there are more than two tenderers with the same ranking. Using the above method to highlight the value of innovative subjects will make these suppliers more competitive, because of their innovativeness ratings in the procurement procedures, and not confine them to the limitation of price-determination. So that, subject suppliers with a high degree of innovation, may attain the right to the preferential contract awarding that they deserve due to their innovativeness, and the procuring entity can purchase suitable innovative products in a more efficient and easy process. It also lowers the threshold for tenderers with innovation energy to enter the government procurement market, thus achieving the goal of supporting industrial innovation and creating a win-win scenario for supply and demand. [1] Cross-reference Table of Amended Provisions of the Statute for Industrial Innovation, The Ministry of Economic Affairs, https://www.moea.gov.tw/MNS/populace/news/wHandNews_File.ashx?file_id=59099 (Last viewed date: 12/08/2017). [2] According to the Guidance for public authorities on Public Procurement of Innovation issued by the Procurement of Innovation Platform in 2015, the so-called innovation procurement in essence refers to that the public sector can obtain innovative products, services, or work by using the government procurement processes, or that the public sector can administer government procurement with a new-and-better process. Either way, the implementation of innovation procurement philosophy is an important link between government procurement, R & D and innovation, which shortens the distance between the foresighted emerging technologies/processes and the public sector/users. [3] The EU's innovative procurement mechanism comprises the "Public Procurement of Innovation Solutions" (PPI Solutions) and "Pre-Commercial Procurement" (PCP). The former is one of the government procurement procedures, explicitly regulated in the new EU Public Procurement Directive (Directive 2014/24 / EU), for procuring solutions that are innovative, near or in preliminary commercial prototype; The latter is a procurement process designed to assist the public sector in obtaining technological innovative solutions that are not yet in commercial prototype, must undergo research and development process, and are not within the scope of EU Public Procurement Directive. [4] The "software, innovative and green products or services", as described in paragraph 1 of Article 27 of the amended Statute for Industrial Innovation, refers to, respectively, "software", "innovative products or services", and "green products or services" in general. There is no co-ordination or subordination relationship between the three; the same applies to "innovative and green products or services" in paragraph 4. [5] Article 93 of the Government Procurement Act stipulates: "An entity may execute an inter-entity supply contract with a supplier for the supply of property or services that are commonly needed by entities." Additionally, Article 2 of the Regulations for The Implementation of Inter-entity Supply Contracts stipulates: "The term 'property or services that are commonly needed by entities' referred to in Article 93 of the Act means property or services which are commonly required by two or more entities. The term 'inter-entity supply contract (hereinafter referred to as the “Contract”)' referred to in Article 93 of the Act means that an entity, on behalf of two or more entities, signs a contract with a supplier for property or services that are commonly needed by entities, so that the entity and other entities to which the Contract applies can utilize the Contract to conduct procurements." Therefore, according to the interpretation made by the Public Construction Commission, the Executive Yuan (PCC, for short), organizations handling inter-entity supply contracts should first conduct a demand investigation. [6] In general, organizations in charge of handling the inter-entity supply contracts will disseminate official documents to applicable organizations with an invitation to furnish information online about their interests and estimated requirement (for budget estimation) at government's e-procurement website. However, in the case of more prospective subjects (such as cloud services of the emerging industry), it may be difficult for an organization to accurately estimate the demand when filling out the survey, resulting in a mismatch of data between the demand survey and actual needs. [7] In accordance with the authorization of paragraph 3 of the Article, the IDB has established "Regulations Governing Examination and Identification of Advanced Recycled Products by Ministry of Economic Affairs" (including an appendix: Identification Specification for Resource Regenerating Green Products), except that the priority procurement process was not stipulated, because the Resource Regenerating Green Products, that meet the requirements of the Ministry of Economic Affairs, are covered by the "Category III Products" in the provisions of Article 6 of the existing "Regulations for Priority Procurement of Eco-Products", set forth by the PPC and The Environmental Protection Administration of the Executive Yuan. Hence, organizations that have the requirement to procure green products, may proceed with priority procurement by following the regulations in the "Regulations for Priority Procurement of Eco-Products". [8] After the amendment of the Article, the "software" in the provisions of paragraph 1 was excluded in paragraph 4, because the objective of paragraph 4 is to promote industry innovation and sustainable development with the use of a more flexible government procurement procedure. Thus, the subjects of the priority procurement mechanism are focused on "innovative" and "green" products or services, which exclude popular "software" that has a common standard in the market. However, if it is an "innovative software", it may be included in the "innovative products or services" in the provisions of paragraph 4. [9] According to the provisions of Article 12 of the Charges And Fees Act: "In any of the following cases, the executive authority in charge of the concerned matters may waive or reduce the amount of the charges and fees, or suspend the collection of the charges and fees: 7. Waiver, reduction, or suspension made under other applicable laws." [10] Refer to Article 12, Paragraph 1, Subparagraphs 1 and Article 13, Paragraph 1 and 2 of Regulations for Priority Procurement of Eco-Products. [11] Refer to Article 4 of Regulations for Obliged Purchasing Units / Institutions to Purchase the Products and Services Provided by Disabled Welfare Institutions, Organizations or Sheltered Workshops. [12] Refer to Article 12, Paragraph 1, Subparagraphs 2 and Article 13, Paragraph 3 of Regulations for Priority Procurement of Eco-Products. [13] The provisions of paragraph 3 Article 16 of the Regulations for Evaluation of the Most Advantageous Tender stipulates: Where price is included in scoring, its proportion of the overall score shall be not less than 20% and not more than 50%.
Executive Yuan’s call to action:“Industrial Upgrading and Transformation Action Plan”I.Introduction Having sustained the negative repercussions following the global financial crisis of 2008, Taiwan’s average economic growth rate decreased from 4.4 percent (during 2000-2007 years) to 3 percent (2008-2012). This phenomenon highlighted the intrinsic problems the Taiwanese economic growth paradigm was facing, seen from the perspective of its development momentum and industrial framework: sluggish growth of the manufacturing industries and the weakening productivity of the service sector. Moreover, the bleak investment climate of the post-2008 era discouraged domestic investors injecting capital into the local economy, rendering a prolonged negative investment growth rate. To further exacerbation, the European Debt Crisis of 2011 – 2012 has impacted to such detriment of private investors and enterprises, that confidence and willingness to invest in the private sector were utterly disfavored. It can be observed that as Taiwan’s industrial core strength is largely concentrated within the the manufacturing sector, the service sector, on the other hand, dwindles. Similarly, the country’s manufacturing efforts have been largely centered upon the Information & Communications Technology (ICT) industry, where the norm of production has been the fulfillment of international orders in components manufacturing and Original Equipment Manufacturing (OEM). Additionally, the raising-up of society’s ecological awareness has further halted the development of the upstream petrochemical and metal industry. Consumer goods manufacturing growth impetus too has been stagnated. Against the backdrop of the aforementioned factors at play as well as the competitive pressure exerted on Taiwan by force of the rapid global and regional economic integration developments, plans to upgrade and transform the existing industrial framework, consequently, arises out as an necessary course of action by the state. Accordingly, Taiwan’s Executive Yuan approved and launched the “Industrial Upgrading and Transformation Action Plan”, on the 13th of October 2014, aiming to reform traditional industries, reinforcing core manufacturing capacities and fostering innovative enterprises, through the implementation of four principal strategies: Upgrading of Product Grade and Value, Establishment of Complete Supply Chain, Setting-up of System Integration Solutions Capability, Acceleration of Growth in the Innovative Sector. II.Current challenges confronting Taiwanese industries 1.Effective apportionment of industrial development funds Despite that Research and Development (R&D) funds takes up 3.02% of Taiwan’s national GDP, there has been a decrease of the country’s investment in industrial and technology research. Currently Taiwan’s research efforts have been directed mostly into manufacturing process improvement, as well as into the high-tech sector, however, traditional and service industries on the other hand are lacking in investments. If research funds for the last decade could be more efficiently distributed, enterprises would be equally encouraged to likewise invest in innovation research. However, it should be noted that Taiwan’s Small and Medium Enterprises (SME) based on their traditional developmental models, do not place research as their top priority. Unlike practices in countries such as Germany and Korea, the research fund input by private enterprises into academic and research institutions is still a relatively unfamiliar exercise in Taiwan. With regards to investment focus, the over-concentration in ICTs should be redirected to accommodate growth possibilities for other industries as well. It has been observed that research investments in the pharmaceutical and electric equipment manufacturing sector has increased, yet in order to not fall into the race-to-the-bottom trap for lowest of costs, enterprises should be continually encouraged to develop high-quality and innovative products and services that would stand out. 2.Human talent and labor force issues Taiwan’s labor force, age 15 to 64, will have reached its peak in 2015, after which will slowly decline. It has been estimated that in 2011 the working population would amount to a meager 55.8%. If by mathematical deduction, based on an annual growth rate of 3%, 4% and 5%, in the year 2020 the labor scarcity would increase from 379,000, 580,000 to 780,000 accordingly. Therefore, it is crucial that productivity must increase, otherwise labor shortage of the future will inevitably stagnate economic growth. Notwithstanding that Taiwan’s demographical changes have lead to a decrease in labor force; the unfavorable working conditions so far has induced skilled professionals to seek employment abroad. The aging society along with decrease in birth rates has further exacerbated the existing cul-de-sac in securing a robust workforce. In 1995 the employment rate under the age of 34 was 46.35%, yet in 2010 it dropped to a daunting 37.6%. 3.Proportional land-use and environmental concerns Taiwan’s Environmental Impact Assessment (EIA) is a time-consuming and often unpredictable process that has substantially deterred investor’s confidence. Additionally, there exists a disproportionate use of land resources in Taiwan, given that demand for its use predominantly stems from the northern and middle region of the country. Should the government choose to balance out the utilization of land resources across Taiwan through labor and tax policies, the situation may be corrected accordingly. III.Industrial Upgrading and Transformation Strategies The current action plan commences its implementation from October 2014 to end of December 2024. The expected industrial development outcomes are as follows: (1) Total output value of the manufacturing sector starting from 2013 at NTD 13.93 trillion is expected to grow in 2020 to NTD 19.46 trillion. (2) Total GDP of the service sector, starting at 3.03 trillion from 2011 is expected to grow in 2020 to 4.75 trillion NTD. 1.Strategy No.1 : Upgrading of product grade and value Given that Taiwan’s manufacturing industry’s rate for added value has been declining year after year, the industry should strive to evolve itself to be more qualitative and value-added oriented, starting from the development of high-end products, including accordingly high-value research efforts in harnessing essential technologies, in the metallic materials, screws and nuts manufacturing sector, aviation, petrochemical, textile and food industries etc. (1) Furtherance of quality research Through the employment of Technology Development Program (TDP) Organizations, Industrial TDP and Academic TDP, theme-based and pro-active Research and Development programs, along with other related secondary assistance measures, the industrial research capability will be expanded. The key is in targeting research in high-end products so that critical technology can be reaped as a result. (2) Facilitating the formation of research alliances with upper-, mid- and downstream enterprises Through the formation of research and development alliances, the localization of material and equipment supply is secured; hence resulting in national autonomy in production capacity. Furthermore, supply chain between industrial component makers and end-product manufacturers are to be conjoined and maintained. National enterprises too are to be pushed forth towards industrial research development, materializing the technical evolution of mid- and downstream industries. (3) Integrative development assistance in Testing and Certification The government will support integrative development in testing and certification, in an effort to boost national competitive advantage thorough benefitting from industrial clusters as well as strengthening value-added logistics services, including collaboration in related value-added services. (4) Establishment of international logistics centre Projection of high-value product and industrial cluster image, through the establishment of an international logistics centre. 2.Strategy No.2 : Establishment of a Complete Supply Chain The establishing a robust and comprehensive supply chain is has at its aim transforming national production capabilities to be sovereign and self-sustaining, without having to resort to intervention of foreign corporations. This is attained through the securing of key materials, components and equipments manufacturing capabilities. This strategy finds its application in the field of machine tool controllers, flat panel display materials, semiconductor devices (3D1C), high-end applications processor AP, solar cell materials, special alloys for the aviation industry, panel equipment, electric vehicle motors, power batteries, bicycle electronic speed controller (ESC), electrical silicon steel, robotics, etc. The main measures listed are as follows: (1) Review of industry gaps After comprehensive review of existing technology gaps depicted by industry, research and academic institutions, government, strategies are to be devised, so that foreign technology can be introduced, such as by way of cooperative ventures, in order to promote domestic autonomous development models. (2) Coordination of Research and Development unions – building-up of autonomous supply chain. Integrating mid- and downstream research and development unions in order to set up a uniform standard in equipment, components and materials in its functional specifications. (3) Application-theme-based research programs Through the release of public notice, industries are invited to submit research proposals focusing on specific areas, so that businesses are aided in developing their own research capabilities in core technologies and products. (4) Promotion of cross-industry cooperation to expand fields of mutual application Continuously expanding field of technical application and facilitating cross-industry cooperation; Taking advantage of international platform to induce cross-border technical collaboration. 3.Strategy No.3 : Setting-up of System Integration Solutions capability Expanding turnkey-factory and turnkey-project system integration capabilities, in order to increase and stimulate export growth; Combination of smart automation systems to strengthen hardware and software integration, hence, boosting system integration solution capacity, allowing stand-alone machinery to evolve into a total solution plant, thus creating additional fields of application and services, effectively expanding the value-chain. These type of transitions are to be seen in the following areas: turnkey-factory and turnkey-project exports, intelligent automated manufacturing, cloud industry, lifestyle (key example: U-Bike in Taipei City) industry, solar factory, wood-working machinery, machine tools, food/paper mills, rubber and plastic machines sector. Specific implementation measure s includes: (1) Listing of national export capability – using domestic market as test bed for future global business opportunities Overall listing of all national system integration capabilities and gaps and further assistance in building domestic “test beds” for system integration projects, so that in the future system-integration solutions can be exported abroad, especially to the emerging economies (including ASEAN, Mainland China) where business opportunities should be fully explored. The current action plan should simultaneously assist these national enterprises in their marketing efforts. (2) Formation of System Integration business alliances and Strengthening of export capability through creation of flagship team Formation of system integration business alliances, through the use of national equipment and technology, with an aim to comply with global market’s needs. Promotion of export of turnkey-factory and turnkey-projects, in order to make an entrance to the global high-value system integration market. Bolstering of international exchanges, allowing European and Asian banking experts assist Taiwanese enterprises in enhancing bids efforts. (3) Establishing of financial assistance schemes to help national enterprises in their overseas bidding efforts Cooperation with financial institutes creating financial support schemes in syndicated loans for overseas bidding, in order to assist national businesses in exporting their turnkey-factories and turnkey-solutions abroad. 4. Strategy No.4 : Acceleration of growth in the innovative sectors Given Taiwan economy’s over-dependence on the growth of the electronics industry, a new mainstream industry replacement should be developed. Moreover, the blur distinction between the manufacturing, service and other industries, presses Taiwan to develop cross-fields of application markets, so that the market opportunities of the future can be fully explored. Examples of these markets include: Smart Campus, Intelligent Transportation System, Smart Health, Smart City, B4G/5G Communications, Strategic Service Industries, Next-Generation Semiconductors, Next-Generation Visual Display, 3D Printing, New Drugs and Medical Instruments, Smart Entertainment, Lifestyle industry (for instance the combination of plan factory and leisure tourism), offshore wind power plant, digital content (including digital learning), deep sea water. Concrete measures include: (1) Promotion of cooperation between enterprises and research institutions to increase efficiency in the functioning of the national innovation process Fostering of Industry-academic cooperation, combining pioneering academic research results with efficient production capability; Cultivation of key technology, accumulation of core intellectual property, strengthening integration of industrial technology and its market application, as well as, establishment of circulation integration platform and operational model for intellectual property. (2) Creating the ideal Ecosystem for innovation industries Strategic planning of demo site, constructing an ideal habitat for the flourishing of innovation industries, as well as the inland solution capability. Promotion of international-level testing environment, helping domestic industries to be integrated with overseas markets and urging the development of new business models through open competition. Encouraging international cooperation efforts, connecting domestic technological innovation capacities with industries abroad. (3) Integration of Cross-Branch Advisory Resources and Deregulation to further support Industrial Development Cross-administrations consultations further deregulation to support an ideal industrial development environment and overcoming traditional cross-branch developmental limitations in an effort to develop innovation industries. IV. Conclusion Taiwan is currently at a pivotal stage in upgrading its industry, the role of the government will be clearly evidenced by its efforts in promoting cross-branch/cross-fields cooperation, establishing a industrial-academic cooperation platform. Simultaneously, the implementation of land, human resources, fiscal, financial and environmental policies will be adopted to further improve the investment ambient, so that Taiwan’s businesses, research institutions and the government could all come together, endeavoring to help Taiwan breakthrough its currently economic impasse through a thorough industrial upgrading. Moreover, it can be argued that the real essence of the present action plan lies in the urge to transform Taiwan’s traditional industries into incubation centers for innovative products and services. With the rapid evolution of ICTs, accelerating development and popular use of Big Data and the Internet of Things, traditional industries can no longer afford to overlook its relation with these technologies and the emerging industries that are backed by them. It is only through the close and intimate interconnection between these two industries that Taiwan’s economy would eventually get the opportunity to discard its outdated growth model based on “quantity” and “cost”. It is believed that the aforementioned interaction is an imperative that would allow Taiwanese industries to redefine its own value amidst fierce global market competition. The principal efforts by the Taiwanese government are in nurturing such a dialogue to occur with the necessary platform, as well as financial and human resources. An illustration of the aforementioned vision can be seen from the “Industrie 4.0” project lead by Germany – the development of intelligent manufacturing, through close government, business and academic cooperation, combining the internet of things development, creating promising business opportunities of the Smart Manufacturing and Services market. This is the direction that Taiwan should be leading itself too. References 1.Executive Yuan, Republic of China http://www.ey.gov.tw/en/（last visited: 2015.02.06） 2.Industrial Development Bureau, Ministry of Economic Affairs http://www.moeaidb.gov.tw/（last visited: 2015.02.06） 3.Industrial Upgrading and Transformation Action Plan http://www.moeaidb.gov.tw/external/ctlr?PRO=filepath.DownloadFile&f=policy&t=f&id=4024（last visited: 2015.02.06）
- Impact of Government Organizational Reform to Scientific Research Legal System and Response Thereto (1) – For Example, The Finnish Innovation Fund (“SITRA”)
- The Demand of Intellectual Property Management for Taiwanese Enterprises
- Blockchain in Intellectual Property Protection
- Impact of Government Organizational Reform to Research Legal System and Response Thereto (2) – Observation of the Swiss Research Innovation System
- Recent Federal Decisions and Emerging Trends in U.S. Defend Trade Secrets Act Litigation
- The effective and innovative way to use the spectrum: focus on the development of the "interleaved/white space"
- Copyright Ownership for Outputs by Artificial Intelligence
- Impact of Government Organizational Reform to Research Legal System and Response Thereto (2) – Observation of the Swiss Research Innovation System