An Analysis of the Recusal Mechanism in the Latest Revision of the Government Procurement Act and Regulations Governing Procurements for Scientific and Technological Research and Development

An Analysis of the Recusal Mechanism in the Latest Revision of the Government Procurement Act and Regulations Governing Procurements for Scientific and Technological Research and Development

1. Introduction

  Article 1 of the Government Procurement Act (hereinafter referred to as the Act) reveals that “This Act is enacted to establish a government procurement system that has fair and open procurement procedures, promotes the efficiency and effectiveness of government procurement operation, and ensures the quality of procurement.” Therefore, a recusal mechanism for reviewing qualification/disqualification of tenders and bidders is highly essential, for example, the head of the agency or its related persons should disclose the conflict of interests. After amended and promulgated on May 22, 2019 (Presidential Decree Hua-tzung-1 Yi No. 10800049691), the Act was revised with the identical legislative principle of the Act on Recusal of Public Servants Due to Conflicts of Interest. In other words, a more flexible and transparent mechanism has been adopted, which is more advanced and ideal for both procurement authority and external supervisors.

2. The New Recusal Mechanism of the Act Enhances the Flexibility and Transparency

  The revision struck out the Paragraph 4, Article 15 of the Act, and the regulation related to the recusal mechanism shall be comply with the Act on Recusal of Public Servants Due to Conflicts of Interest, especially the qualification/disqualification provision of the “related persons.” The new government procurement procedure adopted a more flexible and transparent practice, “disclosure in advance and publication afterwards.” The detailed analysis is as follows.

(1) Before the Act amended, the personnel of a procuring entity and its related persons shall withdraw themselves from the procurement.

  Before the Act amended, the personnel of a procuring entity and its related persons shall withdraw themselves from the procurement. According to the previous Paragraph 4 of Article 15 (4), “Suppliers or persons in charge shall not participate in the procurement if they have connections with the agency’s head described in Paragraph 2. However, if the implementation of this paragraph is against fair competition or public interest, the exclusion can be exempted with the authority’s approval.” The Paragraph 2 mentioned specified, “The personnel of a procuring entity shall withdraw themselves from procurement and all related matters thereof if they or their spouses, relatives by blood or by marriage within three degrees, or family members living together with them have interests involved therein.” Simply put, legislators considered that suppliers or persons in charge shall not participate in an agency's procurement if they have conflict of interests with its head. For instance, the spouses, all the relatives within the third degree by consanguinity (blood) or by affinity (marriage), or family members living together with the head of the agency, cannot involve in the procurement of the agency. Furthermore, if a legal entity or an organization is directed by the relatives of the head of a government agency mentioned, it is disqualified from the procurement.

(2) After the Act amended, the recusal of related persons substituted by self-disclosure and information publication norms

  According to the Amendment, the Act was amended because the content of the article is existed in Article 9 of Act on Recusal of Public Servants Due to Conflicts of Interest; thus, Article 15 of the Act is hereby deleted. Recalling Article 9 of the previous Act on Recusal of Public Servants Due to Conflicts of Interest, “A public servant and his related persons shall not conduct transactions such as subsidizing, sales, lease, contracting, or other transactions conducted with consideration with the organ with which the public servant serves or the organs under his supervision.” For this reason, the amendment to Article 15 of Government Procurement Act is to regulate the mechanism of withdrawal of relevant parties by Article 14 of the existing Act on Recusal of Public Servants Due to Conflicts of Interest. However, the amendment of this article is greatly affected by the interpretation of judicial court no. 716, so it is necessary to briefly describe its key points as follows.

  On the basis of the Judicial Yuan Justice Interpretation No. 716 [Transactions between public officials and their associates and service agencies shall be prohibited), adopting a constitutional interpretation of Article 9 of Act on Recusal of Public Servants Due to Conflicts of Interest, grand justice agreed this article does not contradict the proportion principle of article 23 of Constitution of the Republic of China (Taiwan), and it does not violate Article 15 “The right of existence, the right of work, and the right of property shall be guaranteed to the people” and Article 22 “All other freedoms and rights of the people that are not detrimental to social order or public welfare shall be guaranteed under the Constitution”, either. However, for public officials, if they are not allowed to participate in trading competition, it will result in the monopoly of other minority traders, which is not conducive to the public interest. Therefore, this interpretation holds that if the agency has conducted open and fair procedures in the transaction process, and there is sufficient anti-fraud regulation, whether there is still a risk of improper benefit transmission or conflict of interest, and it is necessary to prohibit the transaction of public officials' associates, the relevant authorities should make comprehensive review and improvement as soon as possible.

  Accordingly, following interpretation no. 716, Act on Recusal of Public Servants Due to Conflicts of Interest was amended and published with 23 articles on 13 June, 2018. The withdrawal of interested parties is provided for in Article 14 and an additional six exceptions are provided, including: (1) The procurement carried out by public notice under the Government Procurement Act or pursuant to Article 105 of the same Act. (2) The property right in interest created for the procurement, sale by tender, lease by tender or tender solicitation carried out by public notice in a fair competitive manner pursuant to laws. (3) Subsidy requested in the legal capacity under laws; the subsidy to the public servant’s related person in an open and fair manner pursuant to laws, or the subsidy which might be against the public interest if it is prohibited and is granted subject to the competent authority’s approval. (4) The subject matter of the transaction is provided by the organ with which the public servant serves or the organs under his supervision, and traded at the official price. (5) The lease, acquisition, discretionary management, improvement and utilization of national non-public real estate requested by the state-owned enterprise in order to execute the national construction projects or public policies, or for the purpose of public welfare. (6) The subsidy and transaction under the specific amount.

  The above amendments make the transactions between public officials and related parties that should be avoided in the past partially flexible now. In accordance with Paragraph 2 of the same article, in the case of the first three paragraphs of the proviso of Paragraph 1, the applicant or bidder shall voluntarily state his/her identity in the application or tender documents. After the subsidy or transaction is established, the agency shall disclose it together with its identity. That is to say, the self-disclosure is required beforehand and the information will go public afterwards to meet public expectations of transparency. This is also conducive to the supervision of all sectors, and conforms to the intention of the grand justice’s interpretation.

  The reason why there is no need for government procurement to withdrawal is that the announcement process of the procurement is made in accordance with Government Procurement Act (including open tendering, selective tendering and restricted tendering through the announcement). There are strict procedures to follow and there is no conflict between the conflict of interest of public officials and the spirit of legislation. As to Paragraph 2 of other legal orders, the property right in interest created for the procurement, sale by tender, lease by tender or tender solicitation carried out by public notice in a fair competitive manner pursuant to laws. The legislative explanations are exemplified by the procurement (e.g. procurements for scientific and technological research and development) handled by the announcement in accordance with Fundamental Science and Technology Act.

3. Conclusion: It is suggested that relevant withdrawal regulations should be amended as soon as possible in procurements for scientific and technological research and development

  The strike-out of the recusal provision of the Act does not mean that government procurement stoke out the recusal mechanism. The recusal mechanism is still stated in Article 14 of Act on Recusal of Public Servants Due to Conflicts of Interest. In addition to the advantages of the same regulations on the prohibition of transactions between related parties, it also enables the regulators with open and fair procedures and sufficient prevention of fraud, such as government procurement, to avoid evading so as not to harm the public interest. At the same time, supplemented by open and transparent disclosure, the amendment is a positive change of legislation.

  Meanwhile, this paper believes that Government Procurement Act has adopted the mechanism of flexibility and transparency requirements for the procurement object avoidance regulations, and procurements for scientific and technological research and development should revise relevant withdrawal regulations as soon as possible. In accordance with Paragraph 4 of Article 6 of Fundamental Science and Technology Act and the authorization, Regulations Governing Procurements for Scientific and Technological Research and Development (hereinafter referred to as the regulatory regulations) is established. According to Article 8 (2) and (3) of the regulation, a responsible person, partner, or representative of the public school, public research institute (organization), or juristic person or entity performing the scientific research procurement may not serve as a responsible person, partner, or representative of the supplier. The supplier and the juristic person or entity performing the scientific research procurement may not at the same time be affiliated with each other, or affiliated to the same other enterprise. From the perspective of the article structure, the withdrawal regulation for scientific research procurement is within the norm of Article 15 of Government Procurement Act before the amendment, but it includes regulations for affiliated enterprises, which is not included in Article 15. The amendment to Article 14 of Act on Recusal of Public Servants Due to Conflicts of Interest also states that the proviso of Paragraph 1 of scientific research procurement “other procurements that are regulated by fair competition and by means of an announcement procedure” can also prove that the mechanism for scientific research procurement should adopt this provision. Therefore, it is recommended that the original procurements for scientific and technological research that is independent from Government Procurement Act should be amended by the competent authority as soon as possible in order to comply with the relevant provisions of Article 8 of Regulations Governing Procurements for Scientific and Technological Research and Development and to comply with the original intention of the Regulations Governing Procurements for Scientific and Technological Research and Development, and to avoid stricter regulations on scientific procurement than government procurement. Meanwhile, it is in accordance with the spirit of the grand justice’s interpretation No. 716.

※An Analysis of the Recusal Mechanism in the Latest Revision of the Government Procurement Act and Regulations Governing Procurements for Scientific and Technological Research and Development,STLI, https://stli.iii.org.tw/en/article-detail.aspx?d=8410&i=168&no=105&tp=2 (Date:2024/07/16)
Quote this paper
You may be interested
Taiwan's Approach to AI Governance

Taiwan's Approach to AI Governance 2024/06/19 In an era where artificial intelligence (AI) reshapes every facet of life, governance plays a pivotal role in harnessing its benefits while mitigating associated risks. Taiwan, recognizing the dual-edged nature of AI, has embarked on a comprehensive strategy to ensure its development is both ethical and effective. This article delves into Taiwan's AI governance framework, exploring its strategic pillars, regulatory milestones, and future directions. I. Taiwan's AI Governance Vision: Taiwan AI Action Plan 2.0 Taiwan has long viewed AI as a transformative force that must be guided with a careful balance of innovation and regulation. With the advent of technologies capable of influencing democracy, privacy, and social stability, Taiwan's approach is rooted in human-centric values. The nation's strategy is aligned with global movements towards responsible AI, drawing lessons from international standards like those set by the European Union's Artificial Intelligence Act. The "Taiwan AI Action Plan 2.0" is the cornerstone of this strategy. It is a multi-faceted plan designed to boost Taiwan's AI capabilities through five key components: 1. Talent Development: Enhancing the quality and quantity of AI professionals while improving public AI literacy through targeted education and training initiatives. 2. Technological and Industrial Advancement: Focusing on critical AI technologies and applications to foster industrial growth and creating the Trustworthy AI Dialogue Engine (TAIDE) that communicates in Traditional Chinese. 3. Supportive Infrastructure: Establishing robust AI governance infrastructure to facilitate industry and governmental regulation, and to foster compliance with international standards. 4. International Collaboration: Expanding Taiwan's role in international AI forums, such as the Global Partnership on AI (GPAI), to collaborate on developing trustworthy AI practices. 5. Societal and Humanitarian Engagement: Utilizing AI to tackle pressing societal challenges like labor shortages, an aging population, and environmental sustainability. II. Guidance-before-legislation To facilitate a gradual adaptation to the evolving legal landscape of artificial intelligence and maintain flexibility in governance, Taiwan employs a "guidance-before-legislation" approach. This strategy prioritizes the rollout of non-binding guidelines as an initial step, allowing agencies to adjust before any formal legislation is enacted as needed. Taiwan adopts a proactive approach in AI governance, facilitated by the Executive Yuan. This method involves consistent inter-departmental collaborations to create a unified regulatory landscape. Each ministry is actively formulating and refining guidelines to address the specific challenges and opportunities presented by AI within their areas of responsibility, spanning finance, healthcare, transportation, and cultural sectors. III. Next step: Artificial Intelligence Basic Act The drafting of the "Basic Law on Artificial Intelligence," anticipated for legislative review in 2024, marks a significant step towards codifying Taiwan’s AI governance. Built on seven foundational principles—transparency, privacy, autonomy, fairness, cybersecurity, sustainable development, and accountability—this law will serve as the backbone for all AI-related activities and developments in Taiwan. By establishing rigorous standards and evaluation mechanisms, this law will not only govern but also guide the ethical deployment of AI technologies, ensuring that they are beneficial and safe for all. IV. Conclusion As AI continues to evolve, the need for robust governance frameworks becomes increasingly critical. Taiwan is setting a global standard for AI governance that is both ethical and effective. Through legislation, active international cooperation, and a steadfast commitment to human-centric values, Taiwan is shaping a future where AI technology not only thrives but also aligns seamlessly with societal norms and values.

Impact of Government Organizational Reform to Research Legal System and Response Thereto (2) – Observation of the Swiss Research Innovation System

Impact of Government Organizational Reform to Research Legal System and Response Thereto (2) – Observation of the Swiss Research Innovation System I. Foreword   Switzerland is a landlocked country situated in Central Europe, spanning an area of 41,000 km2, where the Alps occupy 60% of the territory, while it owns little cultivated land and poor natural resources. In 2011, its population was about 7,950,000 persons[1]. Since the Swiss Federal was founded, it has been adhering to a diplomatic policy claiming neutrality and peace, and therefore, it is one of the safest and most stable countries in the world. Switzerland is famous for its high-quality education and high-level technological development and is very competitive in biomedicine, chemical engineering, electronics and metal industries in the international market. As a small country with poor resources, the Swiss have learnt to drive their economic and social development through education, R&D and innovation a very long time ago. Some renowned enterprises, including Nestle, Novartis and Roche, are all based in Switzerland. Meanwhile, a lot of creative small-sized and medium-sized enterprises based in Switzerland are dedicated to supporting the export-orientation economy in Switzerland.   Switzerland has the strongest economic strength and plentiful innovation energy. Its patent applications, publication of essay, frequencies of quotation and private enterprises’ innovation performance are remarkable all over the world. According to the Global Competitiveness Report released by the World Economic Forum (WEF), Switzerland has ranked first among the most competitive countries in the world for four years consecutively since 2009[2]. Meanwhile, according to the Global Innovation Index (GII) released by INSEAD and the World Intellectual Property Organization (WIPO) jointly, Switzerland has also ranked first in 2011 and 2012 consecutively[3]. Obviously, Switzerland has led the other countries in the world in innovation development and economic strength. Therefore, when studying the R&D incentives and boosting the industrial innovation, we might benefit from the experience of Switzerland to help boost the relevant mechanism in Taiwan.   Taiwan’s government organization reform has been launched officially and boosted step by step since 2012. In the future, the National Science Council will be reformed into the “Ministry of Science and Technology”, and the Ministry of Economic Affairs into the “Ministry of Economy and Energy”, and the Department of Industrial Development into the “Department of Industry and Technology”. Therefore, Taiwan’s technology administrative system will be changed materially. Under the new government organizational framework, how Taiwan’s technology R&D and industrial innovation system divide work and coordinate operations to boost the continuous economic growth in Taiwan will be the first priority without doubt. Support of innovation policies is critical to promotion of continuous economic growth. The Swiss Government supports technological research and innovation via various organizations and institutions effectively. In recent years, it has achieved outstanding performance in economy, education and innovation. Therefore, we herein study the functions and orientation of the competent authorities dedicated to boosting research and innovation in Switzerland, and observe its policies and legal system applied to boost the national R&D in order to provide the reference for the functions and orientation of the competent authorities dedicated to boosting R&D and industrial innovation in Taiwan. II. Overview of Swiss Federal Technology Laws and Technology Administrative System   Swiss national administrative organization is subject to the council system. The Swiss Federal Council is the national supreme administrative authority, consisting of 7 members elected from the Federal Assembly and dedicated to governing a Federal Government department respectively. Switzerland is a federal country consisting of various cantons that have their own constitutions, councils and governments, respectively, entitled to a high degree of independence.   Article 64 of the Swiss Federal Constitution[4] requires that the federal government support research and innovation. The “Research and Innovation Promotion Act” (RIPA)[5] is dedicated to fulfilling the requirements provided in Article 64 of the Constitution. Article 1 of the RIPA[6] expressly states that the Act is enacted for the following three purposes: 1. Promoting the scientific research and science-based innovation and supporting evaluation, promotion and utilization of research results; 2. Overseeing the cooperation between research institutions, and intervening when necessary; 3. Ensuring that the government funding in research and innovation is utilized effectively. Article 4 of the RIPA provides that the Act shall apply to the research institutions dedicated to innovation R&D and higher education institutions which accept the government funding, and may serve to be the merit for establishment of various institutions dedicated to boosting scientific research, e.g., the National Science Foundation and Commission of Technology & Innovation (CTI). Meanwhile, the Act also provides detailed requirements about the method, mode and restriction of the government funding.   According to the RIPA amended in 2011, the Swiss Federal Government’s responsibility for promoting innovation policies has been extended from “promotion of technology R&D” to “unification of education, research and innovation management”, making the Swiss national industrial innovation framework more well-founded and consistent[8] . Therefore, upon the government organization reform of Switzerland in 2013, most of the competent authorities dedicated to technology in Swiss have been consolidated into the Federal Department of Economic Affairs, Education and Research.   Under the framework, the Swiss Federal Government assigned higher education, job training, basic scientific research and innovation to the State Secretariat for Education, Research and Innovation (SERI), while the Commission of Technology & Innovation (CTI) was responsible for boosting the R&D of application scientific technology and industrial technology and cooperation between the industries and academy. The two authorities are directly subordinate to the Federal Department of Economic Affairs, Education and Research (EAER). The Swiss Science and Technology Council (SSTC), subordinate to the SERI is an advisory entity dedicated to Swiss technology policies and responsible for providing the Swiss Federal Government and canton governments with the advice and suggestion on scientific, education and technology innovation policies. The Swiss National Science Foundation (SNSF) is an entity dedicated to boosting the basic scientific R&D, known as the two major funding entities together with CTI for Swiss technology R&D. The organizations, duties, functions and operations of certain important entities in the Swiss innovation system are introduced as following. Date source: Swiss Federal Department of Economic Affairs, Education and Research official website Fig. 1 Swiss Innovation Framework Dedicated to Boosting Industries-Swiss Federal Economic, Education and Research Organizational Chart 1. State Secretariat of Education, Research and Innovation (SERI)   SERI is subordinate to the Department of Economic Affairs, Education and Research, and is a department of the Swiss Federal Government dedicated to managing research and innovation. Upon enforcement of the new governmental organization act as of January 1, 2013, SERI was established after the merger of the State Secretariat for Education and Research, initially subordinate to Ministry of Interior, and the Federal Office for Professional Education and Technology (OEPT), initially subordinated to Ministry of Economic Affairs. For the time being, it governs the education, research and innovation (ERI). The transformation not only integrated the management of Swiss innovation system but also unified the orientations toward which the research and innovation policy should be boosted.   SERI’s core missions include “enactment of national technology policies”, “coordination of research activities conducted by higher education institutions, ETH, and other entities of the Federal Government in charge of various areas as energy, environment, traffic and health, and integration of research activities conducted by various government entities and allocation of education, research and innovation resources. Its functions also extend to funding the Swiss National Science Foundation (SNSF) to enable SNSF to subsidize the basic scientific research. Meanwhile, the international cooperation projects for promotion of or participation in research & innovation activities are also handled by SERI to ensure that Switzerland maintains its innovation strength in Europe and the world.   The Swiss Science and Technology Council (SSTC) is subordinate to SERI, and also the advisory unit dedicated to Swiss technology policies, according to Article 5a of RIPA[9]. The SSTC is responsible for providing the Swiss Federal Government and canton governments with advice and suggestion about science, education and innovation policies. It consists of the members elected from the Swiss Federal Council, and a chairman is elected among the members. 2. Swiss National Science Foundation (SNSF)   The Swiss National Science Foundation (SNSF) is one of the most important institutions dedicated to funding research, responsible for promoting the academic research related to basic science. It supports about 8,500 scientists each year. Its core missions cover funding as incentives for basic scientific research. It grants more than CHF70 million each year. Nevertheless, the application science R&D, in principle, does not fall in the scope of funding by the SNSF. The Foundation allocates the public research fund under the competitive funding system and thereby maintains its irreplaceable identity, contributing to continuous output of high quality in Switzerland.   With the support from the Swiss Federal Government, the SNSF was established in 1952. In order to ensure independence of research, it was planned as a private institution when it was established[10]. Though the funding is provided by SERI, the SNSF still has a high degree of independence when performing its functions. The R&D funding granted by the SNSF may be categorized into the funding to free basic research, specific theme-oriented research, and international cooperative technology R&D, and the free basic research is granted the largest funding. The SNSF consists of Foundation Council, National Research Council and Research Commission[11]. Data source: prepared by the Study Fig. 2  Swiss National Science Foundation Organizational Chart (1) Foundation Council   The Foundation Council is the supreme body of the SNSF[12], which is primarily responsible for making important decisions, deciding the role to be played by the SNSF in the Swiss research system, and ensuring SNSF’s compliance with the purpose for which it was founded. The Foundation Council consists of the members elected from the representatives from important research institutions, universities and industries in Swiss, as well as the government representatives nominated by the Swiss Federal Council. According to the articles of association of the SNSF[13], each member’s term of office should be 4 years, and the members shall be no more than 50 persons. The Foundation Council also governs the Executive Committee of the Foundation Council consisting of 15 Foundation members. The Committee carries out the mission including selection of National Research Council members and review of the Foundation budget. (2) National Research Council   The National Research Council is responsible for reviewing the applications for funding and deciding whether the funding should be granted. It consists of no more than 100 members, mostly researchers in universities and categorized, in four groups by major[14], namely, 1. Humanities and Social Sciences; 2. Math, Natural Science and Engineering; 3. Biology and Medical Science; and 4. National Research Programs (NRPs)and National Centers of Competence in Research (NCCRs). The NRPs and NCCRs are both limited to specific theme-oriented research plans. The funding will continue for 4~5years, amounting to CHF5 million~CHF20 million[15]. The specific theme-oriented research is applicable to non-academic entities, aiming at knowledge and technology transfer, and promotion and application of research results. The four groups evaluate and review the applications and authorize the funding amount.   Meanwhile, the representative members from each group form the Presiding Board dedicated to supervising and coordinating the operations of the National Research Council, and advising the Foundation Council about scientific policies, reviewing defined funding policies, funding model and funding plan, and allocating funding by major. (3) Research Commissions   Research Commissions are established in various higher education research institutions. They serve as the contact bridge between higher education academic institutions and the SNSF. The research commission of a university is responsible for evaluating the application submitted by any researcher in the university in terms of the school conditions, e.g., the school’s basic research facilities and human resource policies, and providing advice in the process of application. Meanwhile, in order to encourage young scholars to attend research activities, the research committee may grant scholarships to PhD students and post-doctor research[16]. ~to be continued~ [1] SWISS FEDERAL STATISTICS OFFICE, Switzerland's population 2011 (2012), http://www.bfs.admin.ch/bfs/portal/en/index/news/publikationen.Document.163772.pdf (last visited Jun. 1, 2013). [2] WORLD ECONOMIC FORUM [WEF], The Global Competiveness Report 2012-2013 (2012), http://www3.weforum.org/docs/WEF_GlobalCompetitivenessReport_2012-13.pdf (last visited Jun. 1, 2013); WEF, The Global Competiveness Report 2011-2012 (2011), http://www3.weforum.org/docs/WEF_GCR_Report_2011-12.pdf (last visited Jun. 1, 2013); WEF, The Global Competiveness Report 2010-2011 (2010), http://www3.weforum.org/docs/WEF_GlobalCompetitivenessReport_2010-11.pdf (last visited Jun. 1, 2013); WEF, The Global Competiveness Report 2009-2010 (2009),. http://www3.weforum.org/docs/WEF_GlobalCompetitivenessReport_2009-10.pdf (last visited Jun. 1, 2013). [3] INSEAD, The Global Innovation Index 2012 Report (2012), http://www.globalinnovationindex.org/gii/GII%202012%20Report.pdf (last visited Jun. 1, 2013); INSEAD, The Global Innovation Index 2011 Report (2011), http://www.wipo.int/freepublications/en/economics/gii/gii_2011.pdf (last visited Jun. 1, 2013). [4] SR 101 Art. 64: “Der Bund fördert die wissenschaftliche Forschung und die Innovation.” [5] Forschungs- und Innovationsförderungsgesetz, vom 7. Oktober 1983 (Stand am 1. Januar 2013). For the full text, please see www.admin.ch/ch/d/sr/4/420.1.de.pdf (last visited Jun. 3, 2013). [6] Id. [7] Id. [8] CTI, CTI Multi-year Program 2013-2016 7(2012), available at http://www.kti.admin.ch/?lang=en&download=NHzLpZeg7t,lnp6I0NTU042l2Z6ln1ad1IZn4Z2qZpnO2Yuq2Z6gpJCDeYR,hGym162epYbg2c_JjKbNoKSn6A-- (last visited Jun. 3, 2013). [9] Supra note 5. [10] Swiss National Science Foundation, http://www.snf.ch/E/about-us/organisation/Pages/default.aspx (last visited Jun. 3, 2013). [11] Id. [12] Foundation Council, Swiss National Science Foundation, http://www.snf.ch/E/about-us/organisation/Pages/foundationcouncil.aspx (last visited Jun. 3, 2013). [13] See Statutes of Swiss National Science Foundation Art.8 & Art. 9, available at http://www.snf.ch/SiteCollectionDocuments/statuten_08_e.pdf (last visited Jun. 3, 2013). [14] National Research Council, Swiss National Science Foundation, http://www.snf.ch/E/about-us/organisation/researchcouncil/Pages/default.aspx (last visted Jun.3, 2013). [15] Theres Paulsen, VISION RD4SD Country Case Study Switzerland (2011), http://www.visionrd4sd.eu/documents/doc_download/109-case-study-switzerland (last visited Jun.6, 2013). [16] Research Commissions, Swiss National Science Foundation, http://www.snf.ch/E/about-us/organisation/Pages/researchcommissions.aspx (last visted Jun. 6, 2013).

Brief Introduction to Taiwan Social Innovation Policies

Brief Introduction to Taiwan Social Innovation Policies 2021/09/13 1. Introduction   The Millennium Development Goals (MDGs)[1] set forth by the United Nations in 2000 are carried out primarily by nations and international organizations. Subsequently, the Sustainable Development Goals (SDGs) set forth by the United Nations in 2015 started to delegate the functions to organizations of all levels. Presently, there is a global awareness of the importance of balancing “economic growth”, “social progress”, and “environmental protection” simultaneously during development. In the above context, many similar concepts have arisen worldwide, including social/solidarity economy, social entrepreneurship and social enterprise, and social innovation.   Generally, social innovation aims to alter the interactions between various groups in society through innovative applications of technology or business models, and to find new ways to solve social problems through such alterations. In other words, the goal is to use innovative methods to solve social problems.The difference between social innovation and social enterprise is that social enterprise combines commercial power to achieve its social mission under a specific perspective, while social innovation creates social value through cooperation with and coordination among technology, resources, and communities under a diversified nature. 2. Overview of Taiwan Social Enterprise Policy   To integrate into the global community and assist in the development of domestic social innovation, Taiwan’s Executive Yuan launched the “Social Enterprise Action Plan” in 2014, which is the first policy initiative to support social enterprises (from 2014 to 2016).Under this policy initiative, through consulting with various ministries and applying methods such as “amending regulations”, “building platforms”, and “raising funds”, the initiative set to create an environment with favorable conditions for social innovation and start-ups. At this stage, the initiative was adopted under the principle of “administrative guidance before legislation” in order to encourage private enterprise development without excessive burden, and avoid regulations restricting the development of social enterprises, such as excessive definition of social enterprises. Moreover, for preserving the original types of these enterprises, this Action Plan did not limit the types of social enterprises to companies, non-profit organizations, or other specific types of organizations.   To sustain the purpose of the Social Enterprise Action Plan and to echo and reflect the 17 sustainable development goals proposed in SDGs by the United Nations, the Executive Yuan launched the “Social Innovation Action Plan” (effective from 2018 to 2022) in 2018 to establish a friendly development environment for social innovation and to develop diversified social innovation models through the concept of “openness, gathering, practicality, and sustainability”.In this Action Plan, “social innovation” referred to “social innovation organizations” that solve social problems through technology or innovative business models. The balancing of the three managerial goals of society, environment value, and profitability is the best demonstration of the concept of social innovation. 3. Government’s Relevant Social Enterprise Policy and Resources   The ministries of the Taiwan Government have been promoting relevant policies in accordance with the Social Innovation Action Plan issued by the Executive Yuan in 2018, such as the “Registration System for Social Innovation Enterprises” (counseling of social enterprises), the “Buying Power - Social Innovation Products and Services Procurement”, the “Social Innovation Platform” established by the Ministry of Economic Affairs, the “Social Innovation Manager Training Courses”, the “Promoting Social Innovation and Employment Opportunities” administered by the Ministry of Labor, and the “University Social Responsibility Program” published by the Ministry of Education. Among the above policies stands out the measures adopted by the Ministry of Economic Affairs, and a brief introduction of those policies are as follows: i. Social Innovation Platform   To connect all resources involved in social issues to promote social innovation development in Taiwan, the Ministry of Economic Affairs established the “Social Innovation Platform”.[2] With visibility through the Social Innovation Platform, it has become more efficient to search for targets in a public and transparent way and to assist with the input of resources originally belonging to different fields in order to expand social influence.   As a digital platform gathering “social innovation issues in Taiwan,” the Social Innovation Platform covers multiple and complete social innovation resources, which include the “SDGs Map” constructed on the Social Innovation Platform, by which we can better understand how county and city governments in Taiwan implement SDGs and Voluntary Local Review Reports, and which allow us to search the Social Innovation Database[3] and the registered organizations, by which citizens, enterprises, organizations, and even local governments concerned with local development can find their partners expediently as possible, establish service lines to proactively assist public or private entities with their needs/resources, and continue to enable the regional revitalization organizations, ministries, and enterprises to identify and put forward their needs for social innovation through the function of “Social Innovation Proposals”, which assist social innovation organizations with visibility while advancing cooperation and expanding social influence.   In addition, the “Event Page” was established on the Social Innovation Platform and offers functions, such as the publishing, searching, and sorting of events in four major dimensions with respect to social innovation organization, governments, enterprises, and citizens; and encourages citizens, social innovation organizations, enterprises, and governments to devote themselves via open participation to continuously expande the influence of the (Civic Technology) Social Innovation Platform. The “Corporate Social Responsibility Report” collects the corporate social responsibility reports, observes the distribution of resources for sustainable development by corporations in Taiwan, offers filtering functions by regions, keyword, popular rankings, and or SDGs types, and provides contact information and a download function for previous years’ reports, in order to effectively assist social innovation organizations to obtain a more precise understanding of the status quo, needs, and trends with respect to their development of respective products and services. Figure 1: SDGs Map Reference: Social Innovation Platform (https://si.taiwan.gov.tw/) Figure 2: Social Innovation Database Reference: Social Innovation Platform (https://si.taiwan.gov.tw/) Figure 3: Social Innovation Proposals Reference: Social Innovation Platform (https://si.taiwan.gov.tw/) Figure 4: Event Page Reference: Social Innovation Platform (https://si.taiwan.gov.tw/) Figure 5: Corporate Social Responsibility Report Reference: Social Innovation Platform (https://si.taiwan.gov.tw/) ii. Social Innovation Database   To encourage social innovation organizations to disclose their social missions, products and services, and to guide society to understand the content of social innovation, and to assist the administrative ministries to be able to utilize such information, the Ministry of Economic Affairs issued the “Principles of Registration of Social Innovation Organizations” to establish the “Social Innovation Database”.   Once a social innovation organization discloses the items, such as its social missions, business model, or social influence, it may obtain the relevant promotional assistance resources, including becoming a trade partner with Buying Power (Social Innovation Products and Services Procurement), receiving exclusive consultation and assistance from professionals for social innovation organizations, and becoming qualified to apply to entering into the Social Innovation Lab.Moreover, the Ministry of Economic Affairs is simultaneously consolidating, identifying, and designating the awards and grants offered by the various ministries, policies and measures in respect of investment, and financing and assistance, as resources made available to registered entities.   As of 25 May 2021, there were 658 registered social innovation organizations and 96 Social Innovation Partners (enterprises with CSR or ESG resources that recognize the cooperation with social innovation under the social innovation thinking model may be registered as a “Social Innovation Partner”).The public and enterprises can search for organizations registered in the Social Innovation Database through the above-said Social Innovation Platform, the search ability of which advances the exposure of and the opportunities for cooperation with social innovation organizations. Figure 6: Numbers of registered social innovation organizations and accumulated value of purchases under Buying Power Reference: Social Innovation Platform(https://si.taiwan.gov.tw/) iii. Buying Power - Social Innovation Products and Services Procurement   In order to continue increasing the awareness on social innovation organizations and related issues and promote responsible consumption and production in Taiwan, as well as to raise the attention of the commercial sector to the sustainability-driven procurement models, the Ministry of Economic Affairs held the first “Buying Power - Social Innovation Products and Services Procurement” event in 2017. Through the award system under the Buying Power, it continues to encourage the governments, state-owned enterprises, private enterprises, and organizations to take the lead in purchasing products or services from social innovation organizations, to provide the relevant resources so as to assist social innovation organizations to obtain resources and to explore business opportunities in the markets, to practice responsible consumption and production, and to promote innovative cooperation between all industries and commerce and social innovation organizations.   The aim of the implementation of the Buying Power is to encourage the central and local governments, state-owned enterprises, private enterprises, and non-governmental organizations to purchase products or services from organizations registered in the Social Innovation Database, while prizes will be awarded based on the purchase amounts accumulated during the calculation period. The winners can obtain priority in applying for membership in the Social Innovation Partner Group, with corresponding member services, in the future.   Under the Social Innovation Platform, both the amount of purchase awards and the number of applicants for special awards continue to increase.So far, purchases have accumulated to a value of more than NT$1.1 billion (see Figure 6), and more than 300 organizations have proactively participated. iv. Social Innovation Mark   In order to promote public awareness of social innovation, the Ministry of Economic Affairs has been charged with the commissioned task of promoting the Social Innovation Mark, and issued “ The Small and Medium Enterprise Administration of the Ministry of Economic Affairs Directions for Authorization of the Social Innovation Mark” as the standard for the authorization of the Social Innovation Mark. Social innovation organizations can use the Mark, through obtaining authorization, to hold Social Innovation Summits or other social innovation activities for promoting social innovation concepts.   In order to build the Mark as a conceptual symbol of social innovation, the Ministry of Economic Affairs has been using the Social Innovation Mark in connection with various social innovation activities, such as the Social Innovation Platform, the Buying Power, and the annual Social Innovation Summit. Taking the selection of sponsors of the Social Innovation Summit in 2022 as an example[4], only organizations that have obtained authorization of the Social Innovation Mark can use the Mark to hold the Social Innovation Summit. Figure 7: The Social Innovation Mark of the Small and Medium Enterprise Administration, Ministry of Economic Affairs IV. Conclusion   The “Organization for Economic Cooperation and Development” (OECD) regards social innovation as a new strategy for solving future social problems and as an important method for youth entrepreneurship and social enterprise development.Taiwan’s social innovation energy has entered a stage of expansion and development. Through the promotion of the “Social Innovation Action Plan,” the resources from the central and local governments are integrated to establish the Social Innovation Platform, the Social Innovation Database, the Social Innovation Lab, and the Social Innovation Mark. In addition, incentives such as the Buying Power have been created, manifesting the positive influence of Taiwan’s social innovation. [1] MDGs are put forward by the United Nations in 2000, and are also the goals requiring all the 191 member states and at least 22 international organizations of the United Nations to be committed to on their best endeavors, including: 1. eradicating extreme poverty and hunger, 2. applying universal primary education, 3. promoting gender equality and empowering women, 4. reducing child mortality rates, 5. improving maternal health, 6. combatting HIV/AIDS, malaria, and other diseases, 7. ensuring environmental sustainability, and 8. establishing a global partnership for development. [2] Please refer to the Social Innovation Platform: https://si.taiwan.gov.tw/. [3] Please refer to the Social Innovation Database: https://si.taiwan.gov.tw/Home/Org_list. [4] Please refer to the guidelines for the selection of sponsors of the 2022 Social Innovation Summit: https://www.moeasmea.gov.tw/files/6221/4753E497-B422-4303-A8D4-35AE0B4043A9

Introducing and analyzing the Scope and Benefits of the Regulation「Statute for Upgrading Industries」in The Biotechnology Industry in Taiwan

The recent important regulation for supporting the biopharmaceutical industry in Taiwan has been the 「Statute for Upgrading Industries」 (hereinafter referred to as 「the Statute」).The main purpose of the Statue is for upgrading all industry for future economic development, so it applies to various industries, ranging from agriculture, industrial and service businesses. In other words, the Statute does not offer incentive measures to biopharmaceutical industry in particular, but focuses on promoting the industry development in general. Statute for Upgrading Industry and Related Regulations Generally speaking, the Statute has a widespread influence on industry development in Taiwan. The incentive measures provided in the Statute is complicated and covered other related regulations under its legal framework. Thus, the article will be taking a multi-facet perspective in discussing the how Statute relates to the biopharmaceutical industry. 1 、 Scope of Application According to Article 1 of the Statute, the term 「industries」 refers to agricultural, industrial and service businesses. Consequently, nearly all kinds of industries fall under this definition, and the Statute is applicable to all of them. Moreover, in order to promote the development and application of emerging technology as well as cultivating the recognized industry, the Statute provides much more favorable terms to these industries. These emerging and major strategic industries includes computer, communication and consumer electronics (3C), precise mechanics and automation, aerospace, biomedical and chemical production, green technology, material science, nanotechnology, security and other product or service recognized by the Executive Yuan. 2 、 Tax Benefits The Statute offers several types of tax benefits, so the industry could receive sufficient reward in every way it could, and promote a sound cycle in creating new values through these benefits. (1) Benefits for the purchase of automation equipment The said procured equipment and technology over NTD600, 000 may credit a certain percentage of the investment against the amount of profit-seeking enterprise income tax payable for the then current year. For the purchase of production technology, 5% may be credited. For the purchase of equipment, 7% may be credited. And any investment plan that includes the purchasing of equipment for automation can qualify for a low-interest preferential loan. Besides, for science-based industrial company imported overseas equipment that is not manufacture by local manufactures, from January 1, 2002, the imported equipment shall be exempted from import and business tax. And if the company is a bonded factory, the raw materials to be imported from abroad by it shall also be exempt from import duties and business tax. (2) Benefits for R&D expenditure Expenditure concurred for developing new products, improving production technology, or improving label-providing technology may credit 30%of the investment against the amount of profit-seeking enterprise income tax payable for the then current year. Research expenditures of the current year exceeding the average research expenditure for the past two years, the excess in research expenditure shall be 50% deductible. Instruments and equipments purchased by for exclusive R&D purpose, experimentation, or quality inspection may be accelerated to two years. At last, Biotech and New Pharmaceuticals Company engages in R&D activities, such as Contract research Organization (CRO), may credit 30% of the investment against the amount of profit-seeking enterprise income tax payable. (3) Personnel Training When a company trained staff and registered for business-related course, may credit 30% of the training cost against the amount of profit-seeking enterprise income tax payable for the then current year. Where training expenses for the current year exceeds the two-year average, 50% of the excess portion may be credited. (4) Benefit for Newly Emerging Strategic Industries Corporate shareholders invest in newly emerging strategic industries are entitled to select one of the following tax benefits: A profit seeking enterprise may credit up to 20% of the price paid for acquisition of such stock against the profit seeking enterprise income tax. An individual may credit up to 10%. As of January and once every year, there will be a 1% reduction of the price paid for acquisition of such stock against the consolidated income tax payable in the then current year. A company, within two years from the beginning date for payment of the stock price by its shareholders, selects, with the approval of its shareholder meeting, the application of an exemption from profit-seeking enterprise income tax and waives the shareholders investment credit against payable income tax as mentioned above. However, that once the selection is made, no changes shall be allowed. (5) Benefits for Investment in Equipment or Technology Used for Pollution Control To prevent our environment from further pollution, the Government offers tax benefits to reward companies in making improvements. Investment in equipment or technology used for pollution control may credit 7% of the equipment expenditure, and 5% of the expenditure on technology against the amount of profit-seeking enterprise income tax payable for the then current year. For any equipment that has been verified in use and specialized in air pollution control, noise pollution control, vibration control, water pollution control, environmental surveillance and waste disposal, shall be exempt from import duties and business tax. And for investment plans that planned implementation of energy saving systems can apply for a low interest loan. (6) Incentive for Operation Headquarter To encourage companies to utilize worldwide resources and set up international operation network, if they established operation headquarters within the territory of the Republic of China reaching a specific size and bringing about significant economic benefit, their following incomes shall be exempted from profit-seeking enterprise income tax: The income derived from provision of management services or R&D services. The royalty payment received under its investments to its affiliates abroad. The investment return and asset disposal received under its investment to its affiliates abroad. (7) Exchange of Technology for Stock Option The emerging-industrycompany recognized by government, upon adoption of a resolution by a majority voting of the directors present at a meeting of its board of directors attended by two-thirds of the directors of the company, may issue stock options to corporation or individual in exchange for authorization or transfer of patent and technologies. (8) Deferral of Taxes on the Exchange of Technology for Shares Taxes on income earned by investors from the acquisition of shares in emerging-industry companies in exchange for technology will be deferred for five years, on condition that the shares exchanged for technology amount to more than 20% of the company's total stock equity and that the number of persons who obtain shares in exchange for technology does not exceed five. 3 、 Technical Assistance and Capital Investment The rapid industry development has been closely tied to the infusion of funds. In addition to tax benefits, the Statute incorporates regulations especially for technical assistance and capital investment as below: (1) In order to introduce or transfer advanced technologies, technical organization formed with the contribution of government shall provide appropriate technical assistance as required. (2) In order to advance technologies, enhance R&D activities and further upgrade industries, the relevant central government authorities in charge of end enterprises may promote the implementation of industrial and technological projects by providing subsidies to such R&D projects. (3) In order to assist the start-up of domestic small-medium technological enterprises and the overall upgrading of the entire industries, guidance and assistance shall be provided for the development of venture capital enterprises.

TOP